Smeg K28 User manual

K28 rangehood
90cm wall-mounted canopy with
telescopic chimney
code 3146
ID020608
DUCTING
Extracting the air direct to atmosphere ensures the maximum removal
of grease/oil/particle-laden vapour, odours and, very importantly,
the heat, resulting in a cleaner, more comfortable cooking
environment. An internal ducting pipe could, ideally, continue in a
straight line within the decorative flue to the kitchen roof, then through
the roof cavity and exit via a roof cowl.
If the rangehood is mounted against an internal wall, the ducting
could, as effectively, exit at the rear anywhere along the vertical line
of the concealing decorative flue and at a position that is structurally
feasible for an external wall cowl.
RECIRCULATION
When cooking vapours cannot be ducted to the atmosphere, that is,
the rangehood is mounted on an internal wall and/or there is another
storey above, the supplied recirculation panel is inserted into the
telescopic flue
CHARCOAL FILTERS
In the recirculation mode, the rangehood is also sending cooking
odours back into the kitchen. An activated charcoal filter disc can
be fitted to each side of the centrifugal motor (part number for pair
0899801) to effectively diminish the cooking odours. They are not to
be washed and are replaceable.
DUCTED MATERIAL
The smooth internal walls of either galvanised sheetmetal piping or
high temperature resistant PVC will assist in both greater unobstructed
air flow and quieter operation. Flexible ducting can be considered
for the very short run and difficult bends.
APPLICATION
Designed for wall mounting above a cooktop, the K28, with two-
part telescopic flue, is perfect for kitchens with heights to 2690mm
(approximately 8’10”). Small increments in greater than 2690mm
heights can be gained by increasing the bench height and/or
increasing the gap between the underside of the hood and benchtop.
PERFORMANCE
With a true net air extraction of 797m³/hr net an hour, the more
vigorous styles of cooking, such as pasta boiling, griddle and stir
frying, are catered for. At the touch of the speed control, the power
can be switched down for the gentlest of simmers.
LOW MAINTENANCE
Easy cleaning is a premium with wipe-over 18/10 grade stainless
steel surface. A single lift-out stainless steel and aluminium four-ply
grease filter can be hand washed. The lighting and speed controls
are underslung and forward away from most of the vapour trail and
there is easy access to the twin light globes.
QUIETNESS
44 to 60 dBA. The motor/impellor encasement and internal flue
are smooth-walled to eliminate air drag and noise, hand-finished
welded metal joins for no vibration.
SAFETY
Thermal overload protector or motor; fire-retardant hardened metal
and mesh. VO self-extinguishing polycarbonate for motor housing
and internal flue.
FINISH satin stainless steel
SIZE 900mmW x 500mmD — maximum height 1140mm
INSTALLATION wall mount
MOTOR 250 watt capacitor start, centrifugal, double impellor, two-directional
air uptake
AIR EXTRACTION exhaust to atmosphere or recirculate to kitchen
NB: recirculation panel supplied
CAPACITY 797m³/hr net
SPEEDS three plus OFF push buttons
ILLUMINATION two 20-watt halogen, separate ON/OFF button
FILTRATION 3 x aluminium 4-ply grease lters, removable, washable
NOISE 44–60 dBA
DUCTING 150mm or 125mm diameter ducting required
NB: 150/125mm diameter adaptor supplied
RECIRCULATION lower chimney vented for optional recirculation, recirculation panel
provided
OPTIONAL • charcoal lter pair, part no 08999801
• half wall plate, 900mmW x 650mmH, code 14202
• full wall plate, 900mmW x 1600mm H, code 14203
• extra-long stainless steel upper chimney piece, code 9955
WARRANTY two years parts and labour
for tall ceilings, optional one-piece stainless
steel upper chimney to replace supplied
upper chimney piece, 800mm length, code
2955; resultant maximum chimney height
1220mm

K28 rangehood
90cm wall-mounted canopy with
telescopic chimney
code 3146
ID020608



MIN
MAX




MINMAX

500
DIRECT
DUCTING
PLEASE NOTE: drawings are not to scale.
They are to assist only.
height 810mm min
1140mm max
width 900mm
depth 500mm
packaged dimensions 975mm x 460mm x 620mm = 0.278m³
weight 12.8kg net, 16.8kg gross
air extraction 797m³/hr net
noise rating 44–60 dBA
electricity supply 240 volt, 50 Hz
electrical connection connected power cord with 3-pin plug suitable for standard
10 amp GPO
power cord length 85 cm
wattage motor 250 watts
lights 2 x 20 watt halogen
total 290 watt
current 1.21 amp
air exit aperture 150mm diameter
NB: a 150/125mm diameter adaptor is supplied
duct to atmosphere 150mm or 125mm duct pipe required
supplied • instructions for installation, operation and maintenance
• screws for wall mounting
• recirculation panel (optional use)
• one-way buttery valve (optional use)
• 150mm –125mm diameter air exit aperture collar adaptor
}ducting direct to atmosphere



MIN
MAX




MINMAX

500
RECIRCULATION
890
min190
180
min 110/190 – max 1140
power cord 0.85 metres
controls:
forward, centre
SIDE ELEVATION
MOTOR
CHIMNEY
PLAN
min 110/190
optional
charcoal
filters