Smith & Nephew RENASYS TOUCH User manual

RENASYS TOUCH - Quick reference
(refer to the user manual for full details on RENASYS TOUCH)
- To switch between continuous and intermittent therapy, ensure therapy is paused and press the
therapy mode toggle on the home screen
Intermittent therapy home screen
Continuous therapy home screen
Step 1: Ensure that the device is powered on
and the continuous therapy home screen is
displayed
Step 2: use the + or – buttons to select
prescribed pressure setting
Step 3: Press the Start/Pause therapy button
to start delivering therapy
When therapy is active the status indicator
on top of the device illuminates green and
the therapy indicator at the top of the screen
will rotate orange
Step 1: Ensure that the device is powered
on and the intermittent therapy home screen
is displayed
Step 2: Change the High and Low pressure
settings and cycle times by selecting the
setting and use the + or – to the prescribed
pressure/time
Step 3: Press the Start/Pause therapy
button to start delivering therapy
When therapy is active the status indicator
on top of the device illuminates green and
the therapy indicator at the top of the screen
will rotate orange
All 4 settings can be adjusted within the following pressure
ranges:
High Therapy
25, 40, 50, 60, 70, 80, 90, 100, 120, 140, 160, 180, 200mmHg
High Cycle times: 3, 5, 8, 10 minutes
Low Therapy
0, 25, 40, 50, 60, 70, 80, 90, 100, 120, 140, 160, 180mmHg
Low Cycle times: 2, 3, 5, 8, 10 minutes
3. Starting therapy intermittent
2. Starting therapy (continuous)
1. Switching the device between continuous and intermittent therapy
Therapy mode toggle
Therapy mode toggle
Therapy set point
Status indicator Status indicator
Increase value
Start/Pause therapy
Decrease value

4. Checking for a seal
6. Switching the device between patient and clinician mode
Step 1: Press the Yellow settings
button to access the settings screen
Step 2: Press the change mode
option from the menu
Step 3: Select which mode
(Clinician/Patient) required
Step 4: Please enter the password
(3141) and press the green tick to
switch modes
Step 5: Press yellow button on screen
twice to return to the home screen
5. Locking the screen
Follow on screen seal checking instructions, once seal is
achieved the screen will display ‘seal achieved’ and then
display ‘delivering therapy’
Look for “raisin-like” appearance
Listen for a “hissing” sound, indicating a leak
Feel the dressing, which should be hard to the touch
Possible site of leak
• Wrinkle or crease
• Skin fold or crevice
• Where drain exits lm (where applicable))
Intervention
Seal lm edges with lm dressing
If hole found in transparent lm, patch with adhesive
transparent lm. Pinch paste around drain (if using a
RENASYS™ drain option)
The Lock function locks the touchscreen and Start/Pause therapy icon – Power icon is not locked. The
status indicator continues to illuminate green to indicate the device is still delivering therapy
Supporting healthcare professionals for 150 years
www.smith-nephew.com/uk
™Trademark of Smith & Nephew
©April 2016 Smith & Nephew
72345
24hr Technical Support Freephone Number:
UK: 0800 9155394
Ireland: 1800 30 36 22
When delivering therapy, the screen will go
dark, to view screen, press either play or lock
pad button.
In the event of an alarm, the device will
automatically unlock and the alarm screen will
display
The device will automatically lock and enter
Sleep mode after 5 minutes without user
interaction
Smith & Nephew
Croxley Green Business Park
Building 5, Lakeside
Hatters Lane, Watford
Hertfordshire WD18 8YE
T [phone]
F [phone]