Smiths Medical Pneupac babyPAC B100 Assembly instructions

BBASIC SETTINGS | These are positioned as follows: Function selector - 0. PEEP/CPAP Control - 0. Inspiration time
- 1 second. Expiration time - 2 seconds. Inspiration Pressure Control - 20 x100Pa (20 cmH2O). High Pressure Alarm
Control - 30 x100Pa (30 cmH2O). O2 - 50% using the white scale.
AAIR AND OXYGEN | If Air (black hose) is attached the air supply symbol turns to black and white check. If Oxygen (white hose)
is attached the Oxygen supply symbol turns to white.
SSYSTEM CHECK | Move function selection switch to ‘CMV+ACTIVE PEEP’. All the alarm lights flash in turn, a single burst
of the high priority alarm should sound and the orange silenced indicator should flash for 60 seconds. Check that flow is
coming from the end of the patient circuit.
IINSPIRATORY HIGH PRESSURE CHECK | Inspiratory pressure check - Keep the patient circuit occluded and observe a
reading between 15-25 cmH2O on the manometer. NO ALARM SHOULD SOUND! Leave the high pressure alarm control at 30,
move inspiration pressure control to 40, observe a reading between 25-35 cmH2O on the manometer. The pneumatic alarm
will sound and the red high pressure visual alarm will sound and flash. Return the inspiration pressure control to 20.
CCYCLE CHECK | Please check at this point that the babyPAC™regularly operates about every 3 seconds. Turn the Inspiration/
Expiration dials to their extreme, check that the ventilator has responded and no irregularities occur.
OOPEN CIRCUIT /LOW PRESSURE CHECK | After running the babyPAC for at least 60 seconds, allow the babyPAC™to cycle
with no obstruction at the patient circuit end. After approximately 8 seconds the Low Pressure (disconnection) Alarm sounds.
PPEEP/CPAP CHECK | Occlude the patient circuit - Check PEEP - turn the PEEP/CPAP control clockwise to the first click then
occlude the patient circuit. The manometer should read between 6-14. Set the function dial to IMV+CPAP and the expiratory
time to 1 second, check that the expiratory time is approximately every 10 seconds.
SSET YOUR babyPAC™AS NOTED IN THE BASIC SETTINGS ABOVE.
babyPAC™B100
basic operations
TV195404GB-0911.indd 1 08-11-11 12:40

babyPAC™B100
Indicators & Controls
Smiths Medical International Ltd.
Ashford, UK TN25 4BF
Phone: [phone]
www.smiths-medical.com
Smiths Medical is part of the global technology business Smiths Group plc. Product(s)
described may not be licensed or available for sale in Canada or other countries
outside of the United States. babyPAC and the Smiths Medical and Pneupac design
marks are trademarks of Smiths Medical. The symbol ® indicates the trademark is
registered in the U.S. Patent and Trademark Office and certain other countries.
©2011 Smiths Medical. All rights reserved. TV195404GB-0911
Find your local
contact information at:
www.smiths-medical.com/
customer-support
The details contained in this leaflet are a quick reference guide for information only.
Prior to the use of this equipment, ensure that the relevant user/installation manuals are read and fully understood.
ControlsIndicators
Function Selector
Inspiration Pressure
Control
PEEP/CPAP Control
Air and/or Oxygen % Control
Inspiration Time
High Pressure Alarm Control
Visual Alarms & Manometer
Oxygen Supply Symbol
Air Supply Symbol
Expiration Time










TV195404GB-0911.indd 2 08-11-11 12:40