Smiths Medical CADD-Solis VIP User manual

CADDSolis VIP
Step by Step Clinician Guide:
Manual Programming
for Continuous Therapy Mode
Solis VIP
Step by Step Clinician Guide:
for Continuous Therapy Mode
NOTE: The following video demonstrates the steps required to program a CADD®-Solis VIP v1.3 Ambulatory Infusion
Pump in Manual Mode. The steps used are the same as those used to program a CADD®-Solis VIP v1.5 Ambulatory
Infusion Pump in Manual Mode. CADD®-Solis VIP with Select Library or PharmGuard Enabled use a drug protocol
from the library saved on the pump to program each infusion.
IS0216.EN.AM.Rev.A.1020.indd 1IS0216.EN.AM.Rev.A.1020.indd 1 08/12/2020 10:3308/12/2020 10:33

1. Pump displays the home screen. Press Tasks. 2. Scroll down to View Advanced Tasks
3. Press Select 4. Scroll down and select Start New Patient
IS0216.EN.AM.Rev.A.1020.indd 2IS0216.EN.AM.Rev.A.1020.indd 2 08/12/2020 10:3308/12/2020 10:33

5. Press Continue 6. Enter unlock code and press Accept Value
Refer to your organization for the security code
7. Scroll down and select Continuous 8. Pump begins programming sequence
IS0216.EN.AM.Rev.A.1020.indd 3IS0216.EN.AM.Rev.A.1020.indd 3 08/12/2020 10:3308/12/2020 10:33

9. Press Review 10. Press select to edit Continuous Rate parameter
11. Scroll up or down to adjust infusion rate 12. Once desired setting is confirmed, press Save
IS0216.EN.AM.Rev.A.1020.indd 4IS0216.EN.AM.Rev.A.1020.indd 4 08/12/2020 10:3308/12/2020 10:33

13. Press Accept Value to confirm parameter 14. Press select to edit Reservoir Volume
15. Adjust Reservoir volume 16. Once desired setting is confirmed, press Save
IS0216.EN.AM.Rev.A.1020.indd 5IS0216.EN.AM.Rev.A.1020.indd 5 08/12/2020 10:3308/12/2020 10:33

17. After confirming all parameters, press Next 18. Attach cassette or admin set to pump
19. Press Yes to start prime sequence if applicable 20. Press Prime to start priming
IS0216.EN.AM.Rev.A.1020.indd 6IS0216.EN.AM.Rev.A.1020.indd 6 08/12/2020 10:3308/12/2020 10:33

21. Press Stop Priming once air removed from the line 22. Press No to end the prime sequence
23. Press Yes to start the infusion 24. Pump is running
IS0216.EN.AM.Rev.A.1020.indd 7IS0216.EN.AM.Rev.A.1020.indd 7 08/12/2020 10:3308/12/2020 10:33

25. To change rates during infusion, select stop 26. Press Yes
27. Pump stopping 28. Press Program
IS0216.EN.AM.Rev.A.1020.indd 8IS0216.EN.AM.Rev.A.1020.indd 8 08/12/2020 10:3308/12/2020 10:33

29. Enter security code and press Accept Value 30. Press select to edit Continuous Rate parameter
31. Adjust infusion rate and press Save 32. Press start to review pump settings
IS0216.EN.AM.Rev.A.1020.indd 9IS0216.EN.AM.Rev.A.1020.indd 9 08/12/2020 10:3308/12/2020 10:33

33. Press Review 34. Press Accept Value to confirm parameters
35. After confirming all parameters, press Next 36. Press Yes to start the pump
IS0216.EN.AM.Rev.A.1020.indd 10IS0216.EN.AM.Rev.A.1020.indd 10 08/12/2020 10:3308/12/2020 10:33

IS0216.EN.AM.Rev.A.1020.indd 11IS0216.EN.AM.Rev.A.1020.indd 11 08/12/2020 10:3308/12/2020 10:33

PRODUCT(S) DESCRIBED MAY NOT BE LICENSED OR AVAILABLE FOR SALE IN ALL GEOGRAPHIES
Smiths Medical ASD, Inc.
6000 Nathan Lane North
Minneapolis, MN, 55442, USA
Tel: [phone]
Toll-Free USA 1-800-258-5361
www.smiths-medical.com
Find your local contact information at: www.smiths-medical.com/customer-support
Smiths Medical is part of the global technology business Smiths Group plc. Please see the Instructions for Use/Operator’s Manual for a complete listing of the indications, contraindications, warnings and
precautions. CADD, CADD Solis and the Smiths Medical design mark are trademarks of Smiths Medical. The symbol ® indicates the trademark is registered in the U.S. Patent and Trademark Office and
certain other countries. All other names and marks mentioned are the trademarks or service marks of their respective owners.
©2020 Smiths Medical. All rights reserved. IS0216.EN.AM.Rev.A.1020
Learn more at smiths-medical.com/CADD
IS0216.EN.AM.Rev.A.1020.indd 12IS0216.EN.AM.Rev.A.1020.indd 12 08/12/2020 10:3308/12/2020 10:33