Socket D700 Operating instructions

Programming Guide
1D Imager - D700, S700, DS800, D800, and S800
Model
D700 Black
D700 Gray
D700 Red
D700 White
Model
S700 Blue
S700 Green
S700 Red
S700 White
S700 Yellow
Model
S800 Black
Model
DS800 Black
Model
D800 Black
Compatible with CHS 7Ci.

Table of Contents
Companion App 3
resets 3
Bluetooth Connection Mode 4
prefix/suffix 5
vibrate/Beep Modes 6
Active Modes 7
Presentation modes 8
HID Keyboard Language Settings 9-10
Automatic Reconnection 11
Bluetooth Connection Roles 12
Data Mode - For SPP Mode Only 13
Programming 14
1D symbologies
UPC/EAN 15-25
Code 128 26
gs1-128 26
Code 39 27-28
Convert Code 39 to Code 32 (Italian Pharma Code) 29
Code 32 Prefix 29
Code 93 30
Interleaved 2 of 5 31
Codabar 32-33
MSI 34-35
GS1 DataBar 36-37
sample barcodes 38

3
Companion App
Make sure the scanner is not connected to a host computer or device before scanning a com-
mand barcode.
Factory Reset
Configures the scanner to factory defaults. The scanner powers off after scanning this barcode.
Scan QR code with mobile device
to download app.
Scan QR code with mobile device
to download app.
Set up your scanner with Socket Mobile Companion App.
• Easy to follow instructions for pairing scanners
• Check scanner status
• Check warranty and register scanners
Learn more about Application Mode.
resets
Pairing Reset
If the scanner is paired with a device, unpair it before trying to connect to a different device.
Step 1: Scan barcode (for serial number that begins 1931 and above only).
Or follow steps to manually reset scanner:
A. Power on the scanner.
B. Press and hold down the scan button.
C. Press and hold down the power button.
D. After you hear 3 beeps, release both buttons.
The scanner will unpair and automatically power off.
Step 2: Remove or forget the scanner from the Bluetooth list
on the host device.
The scanner is now discoverable.
Both steps above must be done to complete the unpairing.

4
Bluetooth Connection Mode
Make sure the scanner is not connected to a host computer or device before scanning a com-
mand barcode.
Scan command barcode(s) to configure the scanner.
Basic Mode (HID) (default)
(All host devices)
Configures the scanner to Human Interface Device (HID) mode. The scanner will be discoverable as a
keyboard to other Bluetooth devices.
Application Mode (MFi-SPP) for Apple Devices
*Required for Apple iOS applications developed with Socket Mobile SDK.
Application Mode (Auto Connect-SPP) for Windows or Android 8.0 and later
*Congures the scanner to Serial Port Prole. Not compatible with 7Ci.
Application Mode (SPP) for Windows or Android version 7.0 and lower
*Congures the scanner to Serial Port Prole (SPP).
*For compatible applications developed with Socket Mobile SDK:
https://www.socketmobile.com/partners/app-partners

5
You can configure the scanner to automatically add a prefix and/or suffix to each scan of data.
Scanner is allowed 1 prefix and 2 suffixes.
For custom prefix and suffix, contact [e-mail].
Note: Scanning multiple commands in a single instance will overwrite (not append) the previous
command.
Sufx – Carriage Return (default)
Configures the scanner to add a carriage return after decoded data.
Sufx – Tab
Configures the scanner to add a tab after decoded data.
Sufx – Carriage Return and Line Feed
Configures the scanner to add a carriage return and line feed after decoded data.
Data As Is
Configures the scanner to return only the decoded data (i.e., no prefix or suffix).
Prefix/Suffix

Make sure the scanner is not connected to a host computer or device before scanning a com-
mand barcode.
Vibrate “On” (default)
Enable the scanner to vibrate to indicate a successful scan.
Vibrate “Off”
Disable the scanner from vibrating to indicate a successful scan.
Beep “On” (default)
Enable the scanner to beep to indicate a successful scan.
Beep “Off”
Disable the scanner from beeping to indicate a successful scan.
Vibrate/Beep Modes
6

Scan one of the barcodes to reconfigure the scanner to remain powered on for a longer time.
These settings drain the battery faster. Please ensure the scanner is charged daily.
2 hours (default)
Scanner powers off in 2 hours when idle/inactive while connected and 5 minutes when disconnected.
Continuous Power for 4 hours
Configures the scanner to remain on for 4 hours.
Continuous Power for 8 hours
Configures the scanner to remain on for 8 hours.
Scanner Always On
Configures the scanner to never power off.
Active Modes
7

Presentation Modes
Scan one of the barcodes to configure the scanner to automatically scan barcodes.
These settings drain the battery faster. Please ensure the scanner is charged daily.
Mobile Mode (default)
Reverts back to manual scan mode.
#FNB 41FBA50000#
Auto Mode (recommended)
Configures the scanner to switch to presentation mode when power is detected on the charg-
ing pins. The scanner will remain on presentaion mode until the scan button is pressed to exit the
mode.
#FNB 41FBA50003#
Detect Mode
Configures the scanner to switch to presentation mode when power is detected on the charging
pins. The automatic scan will continue until power is removed.
#FNB 41FBA50002#
Stand Mode
Scanner is permanently in presentation mode.
#FNB 41FBA50001#
Command barcode is for 2D barcode scanners only: D740/D750/D755/D760/S740/S760
8

9
Scan only when the scanner is in Basic Mode (HID profile).
These barcodes are to configure the scanner for different languages using Microsoft Windows key-
board layout.
English (Default)
English UK
French
German
Italian
HID Keyboard Language Settings

HID Keyboard Language Settings
Japanese
Polish
Spanish
Swedish
ANSI Emulation
ANSI Emulation can be slower on Windows systems.
10