SOLIS RHI Series User manual

In st ru ct i on M an u al
Soli s R HI Seri es Hybri d Inverter
G i nlon g Tech nolog i es C o., Lt d.
G i nlong Tech n olog i e s C o., Ltd.
No. 57 Ji n t on g R oad, B i n h ai Indu stri al P ark , Xi an g sh an , Ni ng bo,
Zh eji an g , 3 1 571 2 , P.R .C h i na.
Tel: +86 ( 0) 574 6578 1 806
Fax: +86 ( 0) 574 6578 1 606
If you encou nter an y problem on t h e i nvert er, please f i n d ou t t h e i nvert er S/N
an d con tact u s, w e w i ll t ry t o respond to y ou r q u est i on A SA P .
P lease adh ere to th e act u al produ cts i n case of any di screpan ci es i n t h i s u ser m an u al.
( R H I-3 P ( 5-1 0) K-H VE S-5G )
Ver1 .1
( ForA u strali a)

2
4
7
7
7
8
1 0
1 2
1 5
1 7
1 8
4
2
3
7
1 3
2 0
2 8
3 0
2 7
2 2
2 2
1 .1 P rodu ct D escri pti on
………………………………………………………………………………………………………………
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
…………………………………………………………………………………………
……………………………………………………………………………………
……………………………………………………………………………………………………………………………………
……………………………………………………………………………………………
…………………………………………………………………………………………………………
…………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………………………
1 . Introdu cti on
1 .2 P ack ag i n g
2 . Saf ety & W arni ng
2 .1 Saf et y
2 .2 G en eral Saf et y In stru cti on s
3 . O vervi ew
3 .1 Screen
4 .1 2 LE D Indi cates
3 .2 Keypad
4 . Installati on
4 .3 Select a Locat i on f or t h e In vert er
4 .4 M ou nti n g t h e In vert er
4 .5 P V Inpu t Term i nal A s sem bly
4 .7 A ssem bli ng t h e A C C on nector
4 .8 M eter In st allat i on
4 .9 C om m u ni cat i on C able A ssem bly
5. O perati on
5.2 In f orm at i on
5.3 Setti n g s
5.4 A dvanced Inf orm ati on
C ontents
………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
4
3 9
4 0
4 0
…………………………………………………………………………………………
………………………………………………………………………………
…………………………………………………………………………………
6. C om m i ssi oni ng & Sh u tdow n
6.1 P reparat i on of C om m i ssi on i n g
6.2 C om m i ss i oni n g P rocedu re
7. Trou blesh ooti ng
……………………………………………………………………………………………………………… 4 1
5.5 A dvanced Set t i n g s
…………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………
…………………………………………………………………………………………………………
2 .3 Not i ce For Use 6
…………………………………………………………………………………………………………………………
3 .3 Term i n al C on n ecti on …………………………………………………………………………………………………………
………………………………………………………………………………………
…………………………………………………………………………………
1 9
4 .1 1 Log i c In terf ace C onn ecti on
4 6
………………………………………………………………………………………………
………………………………………………………………………………………………………………………
8. Speci f i cati ons
………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………
1 4
4 .6 B attery Term i nal C om ponen t s ………………………………………………………………………………………
2 3
5.1 M ai n Men u
………………………………………………………………………………………………………………………………
3 8
………………………………………………………………………………………………………………………
5.6 A FC I f u n cti on
1 9
4 .1 0 E xtern al G rou nd C on n ecti on ……………………………………………………………………………………………
2 1
4 .1 4 Invert er M on i t ori n g C on necti on …………………………………………………………………………………
4 .1 3 E xt ern al R esi du al C u rren t D evi ce( R C D ) 2 1
……………………………………………………………………
4 0
…………………………………………………………………………………………………………
6.3 Sh u tdow n procedu re
9
…………………………………………………………………………………………………………………
4 .2 P rodu ct Storag e
8
…………………………………………………………………………………………………………………
4 .1 P rodu ct h andli n g

1 .1 P rodu ct D escri pt i on
Th e Soli s R H I seri es i s desi g n ed f or resi den ti al h ybri d system s, w h i ch can w ork w i t h
batteri es t o opt i m i ze self -con su m pti on . Th e u n i t can operate i n bot h of f - and on -g ri d m odes.
Th e Soli s R H I seri es h as 4 di f f eren t m odels:
Fi g u re 1 .1 Front si de vi ew
Fi g u re 1 .2 B ot tom si de v i ew
.3 ..2 .
1 . Introdu ct i on 1 . Introdu cti on
1 .2 P ack ag i ng
P lease ensu re th at th e f ollow i ng i tem s are i nclu ded i n th e pack ag i ng w i th you r m ach i ne:
If anyth i ng i s m i ssi ng , please contact you r local Soli s di stri bu tor.
R HI-3 P 5K-HVE S-5G , R H I-3 P 6K-HVE S-5G , R H I-3 P 8K-HVE S-5G , R H I-3 P 1 0K-HVE S-5G
LE D Indi cators
D i splay
Keys
D C Sw i t ch
Invert er x1 B ack plate x1 Fasteni n g screw x2
D C con n ect or
x4
A C g ri d t erm i nal
x1
D u st co ver x2
C T x3
M et er R S4 85 cable x1
A C back u p t erm i n al
x1 B attery con n ect or
x1
R J4 5 con n ect o r x2A crel M et er x1
User m anu al x1
W i fi ant en na x1
Manu al

2 .1 Saf et y
Th e f ollow i ng types of saf ety i nstru cti ons and g eneral i nf orm ati on appear i n th i s docu m ent as
descri bedbelow :
.5..4 .
C A UTIO N :
“C au ti on ” i n di cates a h azardou s si t u ati on w h i ch i f n ot avoi ded, cou ld resu lt
i n m i n or or m oderat e i n ju ry.
W A R N IN G :
“W arn i n g ” i ndi cat es a h azardou s si t u ati on w h i ch i f not avoi ded, cou ld resu lt
i n death or seri ou s i n ju ry.
D A N G E R :
“D ang er” i ndi cates a h azardou s si t u ati on w h i ch i f n ot avoi ded, w i ll resu lt i n
deat h or seri ou s i n ju ry.
N O TE :
“Not e” provi des t i ps th at are valu able f or t h e opt i m al operat i on of you r
produ ct .
2 . Saf ety & W arn i n g 2 . Saf ety & W arni ng
2 .2 G en eral Saf et y Instru ct i ons
W A R N IN G :
E lect ri cal i nst allati ons m u st be don e i n accordan ce w i t h t h e local and n ati on al
electri cal saf et y standards.
W A R N IN G :
P lease don’t conn ect P V array posi ti ve ( +) or neg ati ve ( -) t o g rou n d, i t cou ld
cau se seri ou s dam ag e t o th e i nverter.
W A R N IN G :
O nly devi ces i n com pli ance w i th SE LV ( E N 69050) m ay be connected to t h e
R S4 85 and USB i nt erf aces.
W A R N IN G :
D o n ot t ou ch any i nn er li ve part s u n ti l 5 m i n u t es af ter di sconn ect i on
f rom t h e u t i li t y g ri d an d t h e P V i n pu t.
C A UTIO N :
Th e P V array su ppli es a D C voltag e w h en t h ey are exposed t o su nli g h t .
C A UTIO N :
R i sk of elect ri c sh ock f rom en erg y stored i n capaci t ors of th e In vert er, do n ot
rem ove cover f or 5 m i nu tes af ter di sconnecti ng all pow er sou rces ( servi ce tech ni ci an
only) . W arranty m ay be voi ded i f t h e cover i s rem oved w i th ou t au t h ori zat i on .
C A UTIO N :
Th e su rf ace t em peratu re of th e i nvert er can reach u p t o 75℃ ( 1 67 F) .
To avoi d ri sk of bu rns, do not tou ch th e su rf ace of th e i nverter w h i le i t’s operati ng .
In vert er m u st be i nst alled ou t of th e reach of ch i ldren.
W A R N IN G :
To redu ce t h e ri sk of f i re, over-cu rren t prot ect i ve devi ces ( O C P D ) are
req u i red f or ci rcu i t s conn ected to th e i nverter.
Th e D C O C P D sh all be i n stalled per local req u i rem en ts. A ll ph otovoltai c sou rce
an d ou tpu t ci rcu i t condu ctors sh all h ave th at com ply w i t h th e NE Ci solators
A rt i cle 690, P art II. A ll Soli s si ng le ph ase i n vert ers f eatu re an i nt eg rated
D C sw i t ch .
C A UTIO N :
R i sk of e lectri c sh ock , do not rem ove cover. Th ere i s n o u ser servi ceable
part s i nsi de, ref er servi ci n g t o q u ali f i ed and accredi t ed servi ce t ech n i ci ans.
N O TE :
P V m odu le u sed w i t h i nvert er m u st h ave an IE C 61 73 0 C lass A rati n g .
W A R N IN G :
O perat i on s below m u st be accom pli sh ed by li cen sed tech ni ci an or Soli s
au th ori zed person .
W A R N IN G :
O perat or m u st pu t on th e t ech n i ci ans’ g loves du ri ng th e w h ole process i n case
of any electri cal h azards.
W A R N IN G :
A C -B A C KUP of R HI seri es i s f orbi dden t o con n ect to t h e g ri d.

2 . Saf ety & W arn i n g
3 .1 Screen
Soli s R HI seri es adopts LCD screen, i t di splays th e statu s, operati ng i nf orm ati on and
setti ng s of th e i nverter.
3 . O vervi e w
W A R N IN G :
Th e R H I seri es does not su pport parallel ( th ree- an d si ng le-ph ase) operati on
on t h e A C -B A C KUP port . P arallel operati on of t h e u n i t w i ll voi d th e w arrant y.
W A R N IN G :
P lease ref er t o t h e speci f i cati on of th e batt ery bef ore con f i g u rati on .
2 .3 Not i ce For Use
Th e i n verter h as been con stru cted accordi ng to t h e appli cable saf ety and t ech ni cal
g u i deli n es. Use t h e i nvert er i n i n stallati ons t h at m eet t h e f ollow i n g speci f i cat i on s O NLY:
1 . P erm anent i nstallati on i s req u i red.
2 . Th e elect ri cal i n stallati on m u st m eet all t h e appli cable reg u lati on s an d st an dards.
3 . Th e i nvert er m u st be i nstalled accordi n g t o t h e i n stru cti on s stated i n t h i s m anu al.
4 . Th e i nvert er m u st be i nstalled accordi n g t o t h e correct tech n i cal speci f i cat i on s.
.6. .7.
3 .2 Keypad
Th ere are f ou r k eys i n th e f ron t panel of t h e i nvert er ( f rom lef t to ri g h t ) :
E SC , UP, D O W N and E NTE R k eys. Th e k eypad i s u sed f or:
Scrolli ng t h rou g h t h e di splay ed opti ons ( t h e UP and D O W N k eys) ;
A ccess an d m odi f y th e sett i n g s ( th e E SC an d E NTE R k eys) .
Fi g u re 3 .2 Keyp ad
Soli s R HI seri es i nverter i s di f f erent f rom norm al on-g ri d i nverter, please ref er to th e i nstru cti ons
below bef ore start connecti on.
3 .3 Term i n al C onnect i on
Fi g u re 3 .3 Fron t P an el D i splay
W A R N IN G :
P l e a s e r e f e r t o t h e s p e c i f i c a t i o n o f t h e b a t t e r y b e f o r e c o n f i g u r a t i o n .
3 P h ase LO A D
× ×
D R M C onnect i on
W i Fi C on n ect i on
C O M P ort

4 .1 P rodu ct h andli ng
P lease revi ew t h e i n stru cti on below f or h an dli n g t h e i nvert er:
1 Th e red ci rcles below den ote cu tou t s on t h e produ ct pack ag e.
P u sh i n t h e cu tou t s to f orm h andles f or m ovi n g t h e i nvert er ( see Fi g u re 4 .1 ) .
3
Fi g u re 4 .1 m ove th e i nverter
2 .O pen t h e cart on , th en h andle bot h si des of i n vert er t h rou g h t h e area den oted dot t ed li ne.
( see f i g u re 4 .2 ) .
Fi g u re 4 .2 Inverter h andles
4 .2 P rodu ct St orag e
St orag e tem peratu re m u st be bet w een -4 0℃ and 70℃ an d t h e h u m i di ty m u st be
betw een 0 and 1 00% n on-condensi n g .
St ack n om oreth ant h ree(3)i n vert ersh i g h .
If th e i n vert er i s n ot t o be i n stalled i m m edi ately, storag e i n st ru ct i ons an d envi ron m ent al
con di ti ons are below :
Use t h e ori g i n al box to repack ag e t h e i nvert er, seal w i th adh esi ve tape w i th th e
desi ccant i n si de t h e box.
St ore t h e i nvert er( s) i n a clean an d dry place, f ree of du st and di rt.
Keep box( es) aw ay f rom corrosi ve m ateri als to avoi d dam ag e to th e i n vert er en closu re .
In spect pack ag i n g reg u larly. If pack ag i n g i s dam ag ed( w et , pest dam ag e, et c) ,
re pack ag e th e i nvert er i m m edi at ely.
St ore t h e i nvert er( s) on a flat, h ard su rf ace - not i ncli ned or u psi de dow n .
A f t er lon g -t erm storag e, th e i nvert er ne eds to be f u lly exam i n ed an d t ested by q u ali fied
servi ce or t ech ni cal p erson n el bef ore u si ng .
R est arti n g af ter a long peri od of n on -u se req u i res t h e eq u i pm ent to be i nspect ed
an d, i n som e cases, t h e rem oval of oxi dati on an d du st t h at h as set tled i n si de t h e
eq u i pm ent w i ll be req u i red.
4 . Installati on4 . In stallat i on
.9..8.

4 . Installati on
4 .3 Select a Locat i on f or t h e Inverter
Fi g u re 4 .3 R ecom m en ded In st allati on locati on s
To select a locati on f or t h e i n verter, t h e f ollow i ng cri t eri a sh ou ld be consi dered:
E xposu re t o di rect su nli g h t m ay cau se ou t pu t p ow er derati ng . It i s recom m en ded to
avoi d i n st alli ng t h e i n vert er i n di rect su nli g h t.
It i s recom m en ded th at t h e i nvert er i s i n st alled i n a cooler am bi en t w h i ch doesn't
exceed 1 04 F/4 0C .
4 . In stallat i on
To avoi d overh eati ng , alw ays m ak e su re t h e f low of ai r arou nd t h e i nvert er i s not
block ed. A m i ni m u m clearance of 500m m sh ou ld be k ept betw een i n vert ers or
objects and 500m m clearance bet w een th e bot tom of th e m ach i ne an d th e g rou n d.
Vi si bi li ty of t h e LE D s and LC D sh ou ld be con si dered.
A deq u ate venti lati on m u st be provi ded.
N O TE :
Not h i ng sh ou ld be stored on or placed ag ai nst th e i n vert er.
Install verti cally w i t h a m axi m u m i ncli n e of +/- 5 deg rees, exceedi ng t h i s m ay cau se
o u tpu t pow er derati n g .
Fi g u re 4 .4 In vert er M ou n ti n g clearance
Install on a w all or strong stru ctu re capable of beari ng t h e w ei g h t of th e m ach i ne ( 2 4 k g ) .
W A R N IN G : R i s k o f f i r e
D e spi te caref u l con stru cti on , electri cal devi ces can cau se f i res.
D o n ot i n st all t h e i n vert er i n areas cont ai ni n g h i g h ly f lam m able m ateri als or
g ases.
D o n ot i n st all t h e i n verter i n poten t i ally e xplosi ve atm osph eres.
1000m m
500m m
500m m
500m m
500m m
.1 0. .1 1 .

4 . Installati on4 . In stallat i on
4 .4 Mou n t i n g th e In vert er
Th e i n verter sh all be m ou n t ed vert i cally.
Th e st eps to m ou nt t h e i n vert er are li sted below :
1 . Select th e m ou nt i n g h ei g h t of t h e brack et and m ark t h e m ou n ti ng h oles.
For bri ck w alls, t h e posi t i on of t h e h oles sh ou ld be su i t able f or t h e expansi on bolt s.
Fi g u re 4 .6 Fi x brack et on th e w all
Fi g u re 4 .7 W all M ou n t B rack et
W A R N IN G :
Th e i nverter m u st be m ou n ted vert i cally.
2 . Li f t u p t h e i nvert er ( be caref u l t o avoi d body strai n ) , and ali g n t h e back brack et on th e
i n vert er w i t h t h e convex sect i on of t h e m ou n t i ng brack et . Hang t h e i nvert er on t h e
m ou n ti n g brack et and m ak e su re th e i nvert er i s secu re.
O n ce a su i t able locat i on h as be f ou n d accordi ng ly to 4 .3 u si ng f i g u re 4 .5 an d f i g u re 4 .6
m ou nt th e w all brack et t o t h e w all.
D i m ensi on s of m ou nti ng brack et :
Fi g u re 4 .5 Invert er w all m ou n t i n g
4 .5 P V Inpu t Term i nal A ssem bly
P lease ensu re th e f ollow i ng bef ore connecti ng th e i nverter:
Mak e su re th e voltag e of th e P V stri ng w i ll not exceed th e m ax D C i npu t voltag e ( 1 000Vdc) .
Vi olati ng th i s condi ti on w i ll voi d th e w arranty.
Mak e su re th e polari ty of th e P V connectors are correct.
Mak e su re th e D C -sw i tch , battery, A C-BA CKUP, and A C -G ri d are all i n th ei r of f -states.
Mak e su re th e P V resi stance to g rou nd i s h i g h er th an 2 0K oh m s.
Th e Soli s R HI seri es i nverter u ses th e MC 4 connectors. P lease f ollow th e pi ctu re below to
assem ble th e MC 4 connectors.
P V w i re cross-secti onal area req u i rem ents:2 .5~4 m m ².
B rack et
Su i t able f i xi n g screw s
Fi g u re 4 .8
U s e a p p r o p r i a t e c r i m p i n g
t o o l s f o r c r i m p i n g
n eg ati ve term i nal
posi ti ve term i nal
Inverter term i nal
.1 3 ..1 2 .

4 . Installati on4 . In stallat i on
1 . Mak e su re you u se a cable w i th i n th e correct speci ficati ons as sh ow n i n th e i m ag e below .
D escri be
W i re di am et er 1 3 ~2 5m m
6~1 3 m m ² (1 0-6A W G )
1 3 m m
Traverse cross secti on al area
E xposu re Leng t h
Nu m eri cal valu e
4 .6 B at t ery Term i n al C om pon en ts
Qu i ck connector i s u sed f or battery connecti on. Th e connector i s su i table f or ti n-plated cables
w i th a condu ctor cross secti on of 2 .5-6m m 2 ( A W G 1 4 -1 0) .
Battery cable ou tsi de di am eter rang e: 5.5m m - 8.0m m .
Th ere are tw o A C term i nals and th e assem bly steps f or both are th e sam e.
Tak eou tth eA C connectorpartsf rom th epack ag i ng .
4 .7 A ssem bli ng th eA C C on n ector
N O TE :
A bladed screw dri ver w i th a 3 -m m w i de blade i s req u i red to perf orm th e connecti on.
Step 1 . Stri p 1 5m m of f th e condu ctor u si ng a su i table stri ppi ng tool f or th i s.
Step 2 . O pen th e spri ng u si ng a screw dri ver as below . 9) ( see f i g u re 4 .
Step 3 . Insert th e stri pped w i re w i th tw i sted li tz w i res all th e w ay i n.
Th e w i re ends h ave to be vi si ble i n th e spri ng . A nd th en close th e spri ng . 1 0)( see f i g u re 4 .
Step 4 . P u sh th e i nsert i nto th e sleeve and ti g h ten th e cable g land w i th 2 N.m torq u e. 1 1 )( see f i g u re 4 .
Step 5. Fi t th e connectors to th e battery ports at th e bottom of th e i nverter w i th correct polari ty
and a " cli ck " sou nd. 1 2 )( see f i g u re 4 .
Fi g u re 4 .9 Fi g u re 4 .1 0
A B C D E F
Fi g u re 4 .1 3 A C con n ect or
In tern al of A C conn ect or si g n s " L1 " , " L2 " , " L3 " , " N" and " P E " f i ve conn ect i on
port s ( see Fi g u re 4 .1 5) . Th ree li ve w i res are conn ecte d t h e " L1 " , " L2 " and
" L3 " t erm i nals respect i vely; g rou n d w i re con nects " P E " ; neu tral w i re
con nect s " N" t erm i nal:
Fi g u re 4 . 1 1 Fi g u re 4 .1 2
L2
L1
P E
L3
N
O u tsi de-di am eters
13~2 5m m
C ross-sect i on
6~1 3 m m ²
68m m
70m m
x
x= 1 3 m m
N
L1
L2
L3
Fi g u re 4 .1 4 St ri pped and bared w i re Fi g u re 4 .1 5 Int ernal stru ct u re of A C con n ect or
P E
Table 4 .1
.1 5..1 4 .

4 . Installati on4 . In stallat i on
4 .8 Meter In stallat i on
Soli s R HI-( 5-1 0) K-HVE S-5G seri es i nverter i nteg rated export pow er control f u ncti on, th i s f u ncti on
need connect a 3 -P h ase pow er m eter f or export pow er controlli ng .
P lease f ollow below pi ctu re to i nstall t h e 3 -ph ase pow er m eter and C T.
A ) St ri pped th e i nsu lati on sleeve of cable f or 70m m , so th at bared copper-cored con n ect or
reach es f or 1 3 m m . C able t h rou g h n u t an d sleeve of sock et elem ent , i nsert correspon di ng
term i nals and t i g h t en w i t h allen w ren ch ( see f i g u re 4 .1 6) . Torq u e i s 1 .5-2 .5Nm .
Fi g u re 4 .1 6 C onn ect ed cable
B ) C li p plast i c f i xt u re ( A u xi li ary ti g h ten) i n sock et elem en t , t i g h t en adapt er i n sock et
elem ent , t h en t i g h ten sw i vel n u t w i t h 2 .5-4 Nm t orq u e ( see f i g u re 4 .1 7) .
Fi g u re 4 .1 7 A ssem bly A C term i nal
C ) C on n ect A C con nector w i th i n verter, t h en t i g h t en A C con n ector f or clock w i se,
u n t i l h eari ng a sli g h t cli ck i ng s ou n d i ndi cates conn ect i on su cceed.( see f i g u re 4 .1 8)
Fi g u re 4 .1 8 A C con nect or t o i nvert er
Ti g h t en cable w i th 3 m m allen w ren ch ( f ocu s
i n dot t ed box, see f i g u re 4 .1 6) . A llen screw i s
easy t o drop o f f , don 't screw ou t com pletely.
Fi g u re 4 .1 9 A crel M et er
4 .8.1 Th ree P h ase M et er Ins t allat i on
Fi g u re 4 .2 0 E astron M eter
.1 7..1 6.

C A N
4 . Installati on4 . In stallat i on
4 .9 C om m u ni cat i on C able A ssem bly
Th e R HI seri es i nverter u ses R S4 85 cable to com m u ni cate w i th th e Meter and C A N to
com m u ni cate w i th th e battery's BMS. Th e i m ag e below sh ow s th e assem bly of th e R S4 85/C A N
com m u ni cati on cables.
P rocedu re f or con n ecti n g t h e C A N cable:
1 . Tak e ou t th e C A N cable ( term i nal m ark s ‘C A N' on one end and 'to Meter' on th e oth er end) .
2 . Unscrew th e sw i vel nu t f rom C A N port.
3 .Insert th e R J4 5 term i nal w i th C A N label i nto th e C A N port, th en f asten th e sw i vel nu t.
4 .C onnect th e oth er end to th e battery.
N O TE :
For C A N cable pi n 4 ( blu e) and pi n 5 ( w h i t e-blu e) are u sed f or t h e
com m u n i cati on .
P rocedu re f or con n ecti n g t h e R S4 85 cable :
1 . Tak e ou t th e R S4 85 cable ( term i nal m ark s ‘R S4 85' on one end and 'to Battery' on th e
oth er end) .
2 . Unscrew th e sw i vel nu t f rom R S4 85 port.
3 . Insert th e Tw o-pi n term i nal w i th R S4 85 label i nto th e R S4 85 port, th en f asten th e sw i vel nu t.
4 . Connect th e oth er end to th e Meter.
Fi g u re 4 .2 1
4 .1 1 D R E D port con n ecti on s
N O TE :
Gi nlong h ybri d i nverter i s desi g ned to provi de 1 2 V pow er f or D R E D .
A ssi g n m en t f or i n vert ers capable
of both ch arg i n g and di sch arg i ng
P i n
1 D R M 1 /5
2D R M 2 /6
3 D R M 3 /7
4 D R M 4 /8
5 R ef G en
6
7
8
C om /D R M 0
V+
V-
A ssi g n m ent f or i nvert ers capable
of bot h ch arg i n g and di sch arg i n g
P i n
P lease f ollow below st eps t o assem ble R J4 5 con n ect or.
1 . In sert th e net w ork cable i nt o t h e com m u ni cati on con necti on term i nal of R J4 5.
N O TE :
Th e C A N cable enables th e com m u ni cati on betw een th e i nverter and th e Li -i on
battery, please ch eck f or latest m odel bef ore i nstallati on.com pati bi li ty
A n ext ern al g rou nd con n ecti on i s provi ded at th e ri g h t si de of i nvert er.
P repare O T t erm i nals: M4 . Use prope r t ooli n g t o cri m p th e lu g t o th e term i n al.
C onn ect t h e O T t erm i n al w i th g rou n d cable t o t h e ri g h t si de of i nvert er. Th e torq u e i s 2 N.m .
4 .1 0 E xtern al G rou nd C onn ect i on
Fi g u re 4 .2 2 C onn ect t h e ext ern al g rou ndi n g condu ctor
Fi g u re 4 . 2 3 R J4 5 com m u ni cati on conn ecti on t erm i nals
.1 8. .1 9.

4 . In stallat i on
D escri pti on
Th e i nvert er can detect D C pow er.
No D C pow er.
Th e i nvert er i s f u lly operati onal.
Th e i nvert er h as stopped operat i n g .
Th e i nvert er i s i ni t i ali zi ng .
Fau lt con di t i on i s detect ed.
No f au lt condi t i on detect ed.
St atu s
O N
O FF
O N
O FF
O FF
O N
FLA SHING
Li g h t
P O W E R
O P E R A TIO N
A LA R M
4 .1 2 LE D In di cat es
Th ere are th ree LE D i ndi cators on th e R HI i nverter ( R ed, Green, and O rang e) w h i ch i ndi cate th e
w ork i ng statu s of th e i nverter.
Table 4 .2 Statu s In di cat or Li g h ts
FLA SHING E i t h er t h e g ri d or solar cann ot be detect e d.
2 . Use t h e n et w ork w i re st ri pper t o stri p th e i nsu lati on layer of t h e com m u ni cati on cable.
A ccordi ng t o t h e st andard li ne seq u ence as below conn ect t h e w i re to t h e plu g of R J4 5,
and t h en u se a netw ork cable cri m pi ng tool t o m ak e i t t i g h t .
3 . C on nect R J4 5 t o D R M port .
4 . Installati on
4 .1 3 E xternal R esi du al C u rrent D evi ce( R C D )
A ll seri es of Soli s i nvert ers are i nt eg rat ed w i th an i nternal resi du al cu rren t devi ce to prot ect
ag ai nst any pot ent i al d.c com pon en t an d a.c com pon ent of resi du al cu rren t.
Th eref ore, all Soli s i nvert ers, du e t o t h e desi g n , are not able t o f eed i n D C f au lt cu rrent t o
th e system w h i ch f u lly com pli es w i th IE C 603 64 -7-71 2 .
If an ext ern al R C D i s req u i red t o be i nst alled by local reg u lat i on s, Soli s recom m en ds i n st alli ng
a Type-A R C D w i th a t h resh old cu rren t h i g h er t h an 1 00m A .
Th e i nvert er can be m on i tored vi a W i -Fi or G P R S. A ll Soli s com m u ni cati on devi ces are
opt i onal. For con n ect i on i n st ru ct i on s, please ref er t o t h e Soli s Mon i tori n g D evi ce
i n st allat i on m anu als.
In t ern et
G P R S m on i t ori n g
W i -Fi m oni t ori n g
Sm art ph on e m on i tori ng
P C m oni tori n g
W eb server
R ou t er
W i -Fi m oni t ori n g
W i -Fi box
Fi g u re 4 .2 5 W i -Fi orG P R Scom m u n i cati on f u nct i on
4 .1 4 Inverter M on i t ori ng C on n ecti on
C orre s pond e nc e be tw e e n the c abl e s
and the s titc he s of pl u g, P in5 and P in6
of R J 4 5 te rm inal is u s e d for the l ogic
inte rfac e , othe r P ins are re s e rv e d .
P i n 1 : R eserved; P i n 2 : R eserved
P i n 3 : R eserved; P i n 4 : R eserved
P i n 5: Sw i tch _i n pu t 1 ; P i n 6: Sw i tch _i n pu t 2
P i n 7: R eserved; P i n 8: R eserved
1 --8
R J4 5 p l u g
R j4 5t e r m i n a l
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
D R M ( log i c i n t erf ace)
Sw i t ch _i n p u t 1 Sw i t ch _i npu t 2
Fi g u re 4 .2 4 Stri p th e i nsu lati on layer and con n ect to R J4 5 plu g
.2 0. .2 1 .

5. O perati on 5. O perat i on
Fi g u re 5.2 G en eral In f orm at i on
In verter SN:
FFFFFFFFFFFFFFF
B at t ery:
W ai ti ng
1 0 sec
1 0 sec
1 0 sec
1 0 sec
1 0 sec
1 0 sec
1 0 sec
D i splay D u rati on D escri pt i on
D evi ce:
W ai ti ng 1 0 sec
B ack u p:
W ai ti ng
G ri d:
W ai ti ng
D R M NO . :
08
Model. :
00
So f t Ver
. :
000000
5.2 In f orm at i on
In th e i nf orm ati on sect i on , operati ng dat a and i n f orm ati on dat a can be vi ew ed.
Su b-sect i ons i nclu de:
1 . G e ne ral Info
2 . Sy s te m Info
3 . E ne rgy R e c ord s
4 . P VE ne rgy R e c ords
5 . B M S Info
6 . M e te r Info
Th e exam ple di splays are sh ow n i n t h e f ollow i n g f i g u res.
Valu es are f or ref eren ce on ly.
Sh ow s t h e i n verter seri al n u m ber.
Sh ow s t h e s t a t u s o f t h e d e v i c e .
Sh ow s t h e st atu s of th e bat tery.
Sh ow s t h e st atu s of th e back u p ci rcu i t.
Sh ow s t h e st atu s of th e A C g ri d.
Sh ow s t h e m odel n u m ber of t h e devi ce.
Sh ow s t h e f i rm w are versi on of t h e devi ce.
Sh ow s t h e D R M operati ng m ode
( E f f ect i ve f or UK/A US) .
Mont h ly E nerg y Mai n i nterf ace
In f orm at i on
Set t i n g s
A dvanced In f o.
A dvan ced Set t i n g s
U P / D O W N
U P / D O W N
U P / D O W N
P ressi n g t h e E NTE R
k ey t o sw i t ch
to t h e su bm enu
P ressi n g th e E SC
k ey calls back
th e previ ou s m en u
m ai n m enu
Fi g u re 5.1 O perat i on O vervi ew
E SC
E SC
E NTE R
5.1 Mai n Menu
Th ere are f ou r su bm en u i n t h e Mai n M enu ( see Fi g u re 5.1 ) :
1 . Inform ation
2 . Se ttings
3 . A d v anc e d Info.
4 . A d v anc e d Se ttings
.2 2 . .2 3 .

5. O perati on 5. O perat i on
Fi g u re 5.4 E nerg y R ecords
B at t C h g E Tot al:
0000000k W h 1 0 sec
1 0 sec
D i splay D u rati on D escri pt i on
1 0 sec
B att C h g E Today:
000.0k W h
B att C h g E Lastday:
000.0k W h
Fi g u re 5.5 P VE nerg y R ecords
P V E Tot al:
0000000k W h 1 0 sec
1 0 sec
1 0 sec
1 0 sec
1 0 sec
1 0 sec
D i splay D u rati on D escri pt i on
1 0 sec
P V E Today:
000.0k W h
P V E Last day:
000.0k W h
P V E Th i sMon t h :
0000000k W h
P V E LastM on th :
0000000k W h
P V E Th i syear:
0000000k W h
P V E Lastyear:
0000000k W h
Sh ow s t h e tot al batt ery ch arg ed en erg y.
Sh ow s t oday's bat t ery ch arg ed en erg y.
Sh ow s yest erday's bat t ery ch arg ed energ y.
Sh ow s t h e tot al P V g enerati on.
Sh ow s t oday's P V g en erat i on.
Sh ow s yest erday's P V g en erati on.
Sh ow s P V g en erati on of t h i s m ont h .
Sh ow s P V g en erati on of last m ont h .
Sh ow s P V g en erati on of t h i s year.
Sh ow s P V g en erati on of last year.
Fi g u re 5.3 Syst em In f orm at i on
G ri d Freq u en cy
00.00Hz
1 0 sec
1 0 sec
1 0 sec
1 0 sec
1 0 sec
1 0 sec
1 0 sec
V_D C 1 : Sh ow s i n pu t 01 volt ag e valu e.
I_D C 1 : Sh ow s i npu t 01 cu rren t valu e.
V_A : Sh ow s th e g ri d's volt ag e valu e.
I_A : Sh ow s th e g ri d's cu rrent valu e.
Sh ow s th e g ri d's f req u en cy valu e.
D i splay D u rati on D escri pti on
1 0 sec
1 0 sec V_D C 2 : Sh ow s i npu t 0 2 volt ag e valu e.
I_D C 2 : Sh ow s i npu t 02 cu rrent valu e.
V_B : Sh ow s t h e g ri d's voltag e valu e.
I_B : Sh ow s th e g ri d's cu rrent valu e.
V_D C 1 :
I_D C 1 :
000.0V
000.0A
V_D C 2 :
I_D C 2 :
000.0V
000.0A
V_A :
I_A :
000.0V
000.0A
V_B :
I_B :
000.0V
000.0A
V_C :
I_C :
000.0V
000.0A
V_C : Sh ow s th e g ri d's volt ag e valu e.
I_C : Sh ow s t h e g ri d's cu rrent valu e.
B at t ery V:
B at t ery I:
000.0V
000.0A
B ack u p V:
B ack u p P :
000.0V
00.0k W
C h arg e P :
D i sC h arg e P :
00.0k W
00.0k W
B att ery V: Sh ow s th e bat t ery voltag e.
B att ery I: Sh ow s th e bat tery cu rren t .
B ack u p V: Sh ow s th e voltag e of th e back u p port
B ack u p P : Sh ow s t h e pow er of t h e back u p port.
C h arg e P : Sh ow s th e batt ery ch arg i n g pow er.
D i sch arg e P : Sh ow s t h e battery di sch arg i n g pow er.
.2 5..2 4 .

5. O perati on 5. O perat i on
Th e f ollow i ng su bm en u s are di splayed w h en t h e Set ti n g s m enu i s select ed:
1 . Se t Tim e / D ate
2 . Se t A d d re s s
5.3 Set t i n g s
5.3 .1 Set Ti m e/D at e
Th i s f u n ct i on allow s t i m e and dat e set t i n g . W h en t h i s f u n ct i on i s select ed, t h e LC D w i ll
di splay a screen as sh ow n i n Fi g u re 5.8.
NE XT=<E NT> O K=<E SC >
01 -01 -2 02 0 00:00
Fi g u re 5.8 Set Ti m e
P ress t h e UP /D O W N k eys t o set t i m e and dat a. P ress t h e E NTE R k ey to m ove f rom on e
di g i t to t h e n ext ( f rom lef t to ri g h t ) . P ress t h e E SC k ey t o save th e set ti ng s an d ret u rn to
th e previ ou s m enu .
5.3 .2 Set A ddress
Th i s f u n ct i on i s u sed t o set th e address w h en m u ti i nverters are con nect ed t o t h ree m oni t or.
Th e address nu m ber can be assi g n ed f rom “01 ”to “99”. Th e def au lt address i s “01 ”.
YE S= <E NT> NO =<E SC >
Set A ddress: 01
Fi g u re 5.9 Set A ddress
P ress t h e UP /D O W N k eys t o set t h e address. P ress t h e E NTE R k ey t o save t h e set t i n g s.
P ress t h e E SC k ey to cancel t h e ch ang e and ret u rn to t h e previ ou s m en u .
Fi g u re 5.6 B M S In f orm ati on
B M S St atu s:
C A N Fai l
1 0 sec
1 0 sec
1 0 sec
1 0 sec
D i splay D u rati on D escri pti on
1 0 sec
B att ery V:
B at tery I:
000.0V
+00.0A
C h arg eILm t :
D i sch arg eILm t :
000.0A
000.0A
SO C Valu e:
SO H Valu e:
000.0%
000.0%
C h arg eVLm t:
D i sch arg eVLm t :
000.0V
000.0V
Fi g u re 5.7 M eter In f orm ati on
1 0 sec
1 0 sec
1 0 sec
1 0 sec
D i splay D u rati on D escri pti on
1 0 sec
P h aseA P ow er:
+000000W
P h aseB P ow er:
+000000W
P h aseC P ow er:
+000000W
Meter E nerg y:
0000000.00k W h
O u t pu t E n erg y:
0000000.00k W h
Meter Statu s:
R S4 85 Fai l
In pu t E n erg y:
0000000.00k W h
B att ery V: Sh ow s bat t ery volt ag e( From B M S) .
B att ery I: Sh ow s batt ery cu rrent( From B M S) .
Sh ow s th at B attery B M S com m u n i cati on st atu s.
SO C valu e: Sh ow s batt ery state of ch arg e.
SO H valu e: Sh ow s battery st ate of h ealt h ..
Sh ow s ph ase A pow er o n th e m et er.
Sh ow s ph ase B pow er on t h e m eter.
Sh ow s ph ase C pow er on t h e m eter.
Sh ow s th e energ y record on t h e m eter.
Sh ow s m eter com m u ni cat i on st atu s.
1 0 sec
1 0 sec
C h arg eILm t : Sh ow s batt ery ch arg e cu rrent li m i t ( From B M S) .
D i sch arg eILm t: Sh ow s batt ery di sch arg e cu rrent li m i t ( From B M S) .
C h arg eVLm t: Sh ow s batt ery ch arg e voltag e li m i t ( From B M S)
D i sch arg eVLm t: Sh ow s battery di sch arg e voltag e li m i t ( From B M S) .
Sh ow s th e export energ y record on th e m et er.
Sh ow s t h e i m port energ y record on th e m et er.
.2 6. .2 7.

5. O perati on 5. O perat i on5. O perati on 5. O perat i on
5.4 A dvanced Inf orm at i on
N O TE :
To access to t h i s area i s f or f u lly q u ali f i ed and accredi ted t ech n i ci ans on ly.
E n t er m enu “A dvanced In f o.”( P assw ord “001 0" ) .
Select “A dvanced In f o.” f rom t h e Mai n M enu .
Th e screen w i ll req u i re t h e passw ord as below :
In pu t P assw ord
X X X X
Fi g u re 5.1 0 E n t er passw ord
A f t er en t er t h e correct passw ord t h e M ai n Men u w i ll di splay a screen and be able to
access t o t h e f ollow i n g i n f orm ati on .
1 . A l arm M e s s age
2 . W arning M e s s age
3 . R u nning Statu s
4 . C om m u nic ation D ata
5 . Yie l d P rofil e
Th e s creen can be scrolled m an u ally by pressi n g t h e UP /D O W N k eys.
P ressi ng th e E NTE R k ey g i ves access t o a su bm en u .
P ress t h e E SC k ey t o ret u rn t o th e M ai n Men u .
5.4 .1 A larm M essag e
Th e di splay sh ow s t h e lat est alarm m essag es. 1 00
Screen s can be scrolled m an u ally by pre s si n g th e UP / D O W N k eys.
P ress t h e E SC k ey to ret u rn t o th e previ ou s m enu .
A lm 000: M E T_C om m -FA IL
T: 00-00 00:00 D :0000
Fi g u re 5.1 1 A larm Messag e
Th e di splay sh ow s t h e latest w arn m essag es. 1 00
Screen s can be scrolled m an u ally by pressi n g th e UP / D O W N k eys.
P ress t h e E SC k ey t o ret u rn to th e previ ou s m enu .
Msg 000:
T: 00-00 00:00 D:0000
Fi g u re 5.1 2 W arn i n g M essag e
5. 4 . 2 W arni n g M essag e
5.4 .3 R u n n i ng St at u s
Th i s f u n ct i on i s f or m ai n t enance person to g et ru nn i n g m essag e su ch as i n t ern al
tem perat u re, St andard NO . etc.( Valu es are f or ref erence only) .
Fi g u re 5.1 3 R u n n i n g Statu s
G eneral St at u s
A dvanced St atu s
Fi g u re 5.1 4 G en eral Statu s
D C B u s Voltag e:
000.0V 1 0 sec
1 0 sec
1 0 sec
1 0 sec
1 0 sec
D i splay D u rati on D escri pt i on
1 0 sec
P ow er Fact or:
+00.0
P ow er Li m i t% :
000%
In verter Tem p:
+000.0deg C
G ri d St andard:
Flash State:
00000000
Sh ow s D C bu s volt ag e.
Sh ow s pow er f actor of t h e i nvert er.
Sh ow sth epow erou tpu tpercent ag eof t h e
i nvert er.
Sh ow s i n t e r n a l IG B Tt e m p e r a t u r e o f t h e i n v e r t e r .
Sh ow s cu rren t ef f ect i ve g r i d s t a n d a r d .
R eserved f or Soli s Tech n i ci ans
N O TE :
Th e advanced statu s i s reserved f or Soli s tech ni ci ans.
.2 9..2 8.

5. O perati on 5. O perat i on
5.5 A dvanced Sett i n g s
N O TE :
To access to t h i s area i s f or f u lly q u ali f i ed and accredi t ed t ech ni ci ans only.
E n t er m enu “A dvan ced set t i ng s” ( P assw ord “001 0" ) .
Select “A dvanced Setti ng s.” f rom th e Mai n M enu .
Th e screen w i ll req u i re t h e passw ord as below :
Inpu t P assw ord
X X X X
Fi g u re 5.1 7 E nter passw ord
Select A dvanced Sett i n g s f rom t h e Mai n M en u t o access th e f ollow i n g opti on s:
1 . Se l e c t Stand ard
2 . G rid Sw itc he s
3 . B atte ry C ontrol
4 . B ac ku p C ontrol
5 . Storage E ne rgy Se t
6 . STD . M od e Se ttings
7 . Softw are Update
8 . E x port P ow e r Se t
9.R e s e t P as s w ord
1 0 . R e s tart H M I
1 1 . Se l f Te s t C E I 0 - 2 1
1 2 . C om pe ns ation Se t
5.5.1 Select i n g St an dard
Th i s f u n ct i on i s u sed t o select t h e g ri d's ref eren ce standard.
YE S=<E NT> NO =<E SC >
St an dard:G 98
Fi g u re 5.1 8
P ress t h e UP /D O W N k eys to select t h e standard ( G 98, G 99, VD E 4 01 5, E N5054 9L,
C E I02 1 , A S4 777-1 5, NR S097, User-D ef , etc) .
P ress t h e E NTE R k ey to conf i rm t h e sett i n g .
P ress t h e E SC k ey to cancel ch ang es and retu rns to previ ou s m en u .
For di f f erent cou n t ri es, th e g ri d standard needs to be set as di f f eren t accordi n g to local
req u i rem ent s. If t h ere i s any dou bt , please con su lt Soli s servi ce t ech ni ci ans f or detai ls.
N O TE
5.4 .4 C om m u n i cat i on D at a
Th e s creen sh ow s th e i n t ern al dat a of th e In vert er, w h i ch i s f or servi ce t ech n i ci ans only.
01 -05: 00 00 00 00 00
06-1 0: 00 00 00 00 0 0
Fi g u re 5.1 5 C om m u n i cati on D ata
Th e yi eld prof i le i nclu des: E n erg y B attery, E n erg y G ri d and E nerg y B ack u p.
A ll t h e h i st ori cal energ y g en erati on records can be easi ly vi ew ed i n th i s secti on .
5.4 .5 Yi eld P rof i le
E n erg y B at t ery
E n erg y G ri d
Fi g u re 5.1 6 C om m u n i cati on D ata
.3 0. .3 1 .

5. O perati on 5. O perat i on
B attery Select :
P YLO N
Fi g u re 5.2 1 B att ery Select
O verdi sch g SO C :
02 0%
Fi g u re 5.2 2 O verdi sch g SO C
5. 5.4 .1 B ack u p O N/O FF
Th i s sw i tch can en able/di sable t h e electri cal con n ect i on of t h e back u p port.
Th i s secti on i s u sed to set t h e conf i g u rati on of t h e back u p port .
5. 5.4 B ack u p C on trol
B ack u p O N/O FF
B ack u p Setti ng s
Fi g u re 5.2 3 B ack u p C on t rol
Set B ack u p:
O FF
Fi g u re 5.2 4 B ack u p O N/O FF
5. 5.4 .2 B ack u p Set t i ng s
Th i s sect i on sh ow s th e param eter of t h e back u p port .
B ack u p Volt ag e:
2 3 0.0V
Fi g u re 5.2 5 B ack u p Sett i n g s
5.5.2 G ri d Sw i tch es
Fi g u re 5.1 9 Set G ri d O N/O FF
G ri d O N
G ri d O FF
Screens can be scrolled m anu ally by pressi ng t h e UP /D O W N k eys.
P ress t h e E NTE R k ey to save t h e s etti n g .
P ress t h e E SC k ey t o ret u rn t o th e previ ou s m en u .
Th i s f u n ct i on i s u sed to st art or stop th e g en erati on of t h e i n verter.
Th i s sect i on i s u sed t o select t h e correspondi ng batt ery and set t h e bat t ery w ak eu p f u n cti o n .
5.5.3 B at t e ry C on trol
Fi g u re 5.2 0 B att ery C on trol
B attery Select
5.5.3 .1 B at t e ry Select
If h ybri d i n vert er i s n ot conn ect ed t o a battery, t h en select " No B att ery" to avoi d alarm s.
For above com pati ble battery m odu les, O nly t w o param eters need t o be def i n ed:
* O verD i sch g SO C ( 1 0% ~4 0% , def au lt 2 0% )
--Invert er w i ll n ot di sch arg e th e battery w h en t h e O verD i sch g SO C i s reach ed.
B attery self -di sch arg e i s u navoi dable, SO C m ay g o low er t h an t h e li m i t i f th e batt ery
can't g et ch arg ed f or a lon g peri od of ti m e.
B ran d
P ylon t ech
A O B O E T
Solu n a
Set t i n g
Select " P ylon"
Select " A oB o"
Select " Solu n a”
Model
H4 8074 ( C E I 0-2 1 ) /H 4 8050( C E I 0-2 1 ) /
Force H1 ( C E I 0-2 1 ) /Force H2 ( C E I 0-2 1 )
Uh om e-LFP 2 4 00/ 5000 B att ery
Solu na 1 0K P ack HV/Solu na 1 5K P ack H V
Th i s produ ct i s com pati ble w i th t h e f ollow i n g bat t ery m odu les:
.3 2 . .3 3 .

5. O perati on 5. O perat i on
Ti m e-of -Use:
R u n 1 0 sec
1 0 sec
1 0 sec
1 0 sec
1 0 sec
D i splay D u rati on D escri pti on
1 0 sec
C h arg e Li m i t :
01 0.0A
D i sch arg e Li m i t:
01 0.0A
C h arg e Ti m e:
00:00 - 00:00
C h g Total Ti m e:
00:00
Tu rn O N/O FF t h e m ode
Set t h e ch arg e cu rren t li m i t
Set t h e di sch arg e cu rrent li m i t
D ef i n eth ech arg et i m e
D ef i ne t h e di sch arg e ti m e
D ef i ne t h e t ot al ch arg e ti m e
D i sch arg e Ti m e:
00:00 - 00:00
Fi g u re 5.2 9 Ti m e C h arg i n g M ode
Mode:
O N
Fi g u re 5.3 0 O f f G ri d Mode
Ti m e C h arg i ng M ode:
" O pti m al In com e" i s th e sw i t ch t o tu rn on /of f th e Ti m e C h arg i n g Mode.
C u stom er can def i ne th e ch arg e/di sch arg e cu rrent as w ell as w h en t o ch arg e /di sch ag e
t h e batt ery.
O f f G ri d Mode:
E n able t h e m ode f or of f -g ri d sys t em s.
Th e A C G ri d P ort m u st be ph ysi cally di scon n ect ed.
Th ere are tw o setti n g s avai lable i n t h i s sect i on : Met er select and St orag e Mode Select .
5.5.5 St orag e E nerg y Set
Fi g u re 5.2 6 Storag e E n erg y Set
Met er Select
St g M ode Select
5.5.5.1 Met er Select
Th e sett i n g i s u sed to select th e m eter t ype based on t h e actu al con f i g u rati on .
Met er Type:
3 P h M et er
Fi g u re 5.2 7 M et er Type
Th ere are tw o opti on al m odes:
1 . Tim e C harging
2 . O ff- grid M od e
Th e def au lt m ode i s called " A UTO " m ode ( w h i ch i s not sh ow n and can n ot be selected) .
Th e " A UTO " m ode log i c i s: St ore excess P V en erg y i nto th e batt ery and t h en u se i t t o
su pport loads i nst ead of export i n g to t h e g ri d. ( M axi m i ze system self -con su m pti on rate) .
To ch ang e back t o th e def au lt m ode, si m ply set all t h e ot h er m odes as O FF.
5.5.5.2 St orag e Mode Select
Mode:
Ti m e C h arg i n g
Fi g u re 5.2 8 St orag e M ode Select
.3 4 . .3 5.

5. O perati on
D e t erm i ne th e allow ed back f eed p ow er. ( Syst em export to t h e g ri d)
5.5.8.2 B ack f low P ow er
Fi g u re 5.3 4 B ack f low P ow er
B ack f low P ow er
+0000W
5.5.8.3 Fai lSaf e O N/O FF
W h en th i s Fai lsaf e f u nct i on i s O N, th e i nvert er w i ll sh u t dow n on ce i t loses
com m u ni cat i on w i th t h e m eter i n case of an y back f low pow er exceeds t h e li m i t .
Fi g u re 5.3 5 Fai lSaf e O N/O FF
Fai lSaf e O N/O FF
O N
5.5.9 R eset P assw ord
R eset P assw ord: In t h i s m enu , u ser can reset t h e i nverter passw ord, bu t th e adm i n
passw ord i s alw ays vali d.
In pu t New P assw ord
X X X X
Fi g u re 5.3 6 R eset P assw ord
5. O perat i on
Th ese set t i n g s are reserved f or m ai n t enance person nel and tech n i ci an s.
D o not ch ang e anyt h i n g w i t h ou t i nst ru cti on s.
5.5.6 STD .Mode Sett i n g s
1 . W orking M ode Se t
2 . P ow e r R ate L im it
3 . F re q. D e rate Se t
4 . 1 0 m ins Vol tage Se t
5 . 3 Tau Se ttings
6 . Initial Se ttings
Selecti n g “STD Mode. Set ti n g s” di splays t h e su b-m en u sh ow n below :
Fi g u re 5.3 1 STD .M ode Set t i ng s
W ork i ng Mode Set
P ow er R ate Li m i t
Th ere are 6 w ork m ode i n w ork i ng m ode su bm en u .
1 . N UL L
2 . Vol t- w att
3 . Vol t- v ar
4 . F ix e d- P F
5 . R e ac - pow e r
6 . P ow e r- P F
Th e sof tw are u pdate i n clu des th e HMI and D SP. C orrespondi ng f i rm w are versi on
can be ch eck ed i n th i s sett i ng . P ress “E NT” t o en te r t h e u pg radi ng m ode.
5.5.7 Sof t w are Updat e
Fi g u re 5.3 2 Sof t w are Update
HM I Update
D SP Updat e
5.5.8 E xport pow er Set
Th i s f u n ct i on i s to set t h e export pow e r con t rol.
1. E P M O N / O F F
2 . B ac kfl ow P ow e r
3 . F ail s afe O N / O F F
Set ti n g 2 and 3 are only vali d w h en Sett i n g 1 i s set to " O N" .
5.5.8.1 E P MO N/O FF
E n able/D i sable t h e f u n ct i on .
Fi g u re 5.3 3 E P M O N/O FF
E P M O N/O FF
O FF
.3 7..3 6.