Sonoff SNZB-01 User manual

SNZB-01
User manual V 1.0
Wireless Switch
中文------------------1-5 English- ---- -------- 6-10
Deutsch----------- 11-15 Español------------16-20
Français----------- 21-25 Italiano------------26-30
Русский язык------31-35 Português---------36-40

使用说明
eWeLink
eWeLink
1. 下载APP
本设备需要连接SONOFF ZigBee网关进行智能操作，可与其他
产品互联互通。
设备支持其他无线协议为ZigBee 3.0的网关，具体以实际产品为准。
1
2. 取出电池绝缘片
SONOFF TECHNOLOGIES CO., LTD. 中 文
>

打开eWeLink APP，选择要连接的网关，点击 "添加" 子设备，然后
长按设备 "RST" 重置按钮5秒直至LED指示灯闪烁3下，设备进入配对
状态，等待设备连接。
>
CR2450
3V
ZBB rid ge
已添加设 备:0
暂无子 设备，请添 加
添加
如添加失败，请将设备移近网关后再重新添加。
3. 添加子设备
添加子设备前，请先连接网关。
SONOFF TECHNOLOGIES CO., LTD. 中 文
产品参数
产品型号
电池型号
工作电压
无线连接
工作温度
工作湿度
外壳材料
产品规格
SNZB-01
CR2450
3V
ZigBee (IEEE 802.15.4)
-10-40℃
10-90%RH(无冷凝)
PC
43x43x16mm
2

SONOFF TECHNOLOGIES CO., LTD. 中 文
产品介绍
CR2450
3V
开关按键 重置按钮 LED指示灯
产品特点
SNZB-01是一款低功耗遥控无线开关，可任意移动位置，即贴即用，
还可通过添加场景联动设置控制其他设备。
低功耗 低电量消息推送
场景联动
按键动作
用户可根据需要选择单击、双击或者长按让设备执行设置的指令。
3

SONOFF ZigBee网关支持同时连接多
个子设备
ZBB rid ge
已添加设备:0
暂无子设备，请添加
添加
添加设备
正在连接
请让设 备尽量 靠近网 关
25s
找到设备
3个设备 已找到
>
先将网关通电，打开eWeLink APP网关页面，点击添加，然后设置
让所需配对的子设备进入配对状态，等待设备连接。
删除子设备
长按子设备重置按钮5秒直到LED指示灯闪烁3下，此时子设备已在
网关中删除。
用户还可在APP子设备界面中删除子设备。
CR2450
3V
SONOFF TECHNOLOGIES CO., LTD. 中 文
4

设备安装
1. 直接放置桌面使用
请勿安装在金属表面，否则会影响无线通讯距离。
2. 撕下3M胶保护膜，粘贴在所需区域即可
>
设备重量＜1Kg，建议安装高度＜2米。
SONOFF TECHNOLOGIES CO., LTD. 中 文
5

eWeLink
eWeLink
SONOFF TECHNOLOGIES CO., LTD. English
>
The device can be operated intelligently via working with the
SONOFF ZigBee Bridge to communicate with other devices.
The device can work wit h other gateways supporting ZigBee 3. 0
wireless protocol. Detailed information is in accordance with the
final product.
Operation instruction
1. Download APP
2. Pull out the battery insulation sheet
6

SONOFF TECHNOLOGIES CO., LTD. English
>
CR2450
3V
3. Add sub-devices
Connect the Bridge before adding the sub-device
Access eWeLink APP, select the Bridge that you want to connect,
and tap “Add” to add a sub-device. Then long press “RST” reset
button on the device for 5s until the LED indicator flashes three
times, which means the device has entered the pairing mode, and
be patient until pairing completes.
ZBB rid ge
Add ed: 0
No ch ild de vice, pleas e add.
Add
If the addition failed, move the sub-device closer to the Bridge and try again.
Specifications
Model
Battery model
Working voltage
Wireless connection
Working temperature
Working humidity
Material
Dimension
SNZB-01
CR2450
3V
ZigBee (IEEE 802.15.4)
-10~40℃
10-90%RH (non-condensing)
PC
43x43x16mm
7

CR2450
3V
SONOFF TECHNOLOGIES CO., LTD. English
Reset button LED indicator
Manual switch
SNZB-01 is a ZigBee low-energy wireless switch that allows you to
move to any place. Peel and stick. Connect it with the Bridge and
you can create a smart scene to trigger other devices.
Low-energy Low battery notification Smart scene
You can select to press once, press twice or long press the wireless
switch to control the connected device for various functions.
Product Introduction
Features
Button action instruction
8

Conne cting
Kee p the de vic e clo se
eno ugh to t he hub.
25s
Add Devic e
Loo king f or dev ice
3 devices Found
SONOFF ZigBee Bridge supports
connecting multiple sub-devices at the
same time.
Power the Bridge on, access the Bridge page in the eWeLink APP,
and tap “Add”. Then set the sub-device to be paired to the pairing
mode, and be patient until the pairing completes.
>
ZBB rid ge
Add ed: 0
No ch ild de vice, pleas e add.
Add
Delete sub-devices
Long press the reset button on the sub-device for 5s until the LED
indicator flashes three times. In this case, the sub-device is deleted
from the Bridge successfully.
Users can delete sub-devices directly from the sub-device page on APP.
CR2450
3V
9
SONOFF TECHNOLOGIES CO., LTD. English