Southern Enterprises BC961400TX User manual

BC961400TX
IRVING STORAGE BENCH
Assembly Instructions
PO:13008
For assistance with assembly contact.
Southern Enterprises Inc.
customer service 1-800-633-5096
[email protected]
www.seidal.com
Top supports up to 250 lb.

BC961400TX
IRVING STORAGE BENCH
Parts List
Please review all parts and hardware before disposing of any packaging.
Call customer service if missing hardware.
Carefully study the diagrams below.
You may receive extra hardware with your unit.
1 3PCS
short shelf
2 2PCS
long shelf
3 2PCS
side panel
4 1PC
bottom panel
5 1PC
top panel
6 1PC
back panel
7 2PCS
short stretcher
8 2PCS
top stretcher
9 2PCS
bottom stretcher
10 2PCS
side panel
11 1PC
cushion

A 1PC
glue
B 28PCS
wood dowel
C 12PCS
short bolt 1/4” x 3/8”
D 6PCS
medium bolt 1/4” x 3/4”
E 2PCS
long bolt 1/4” x 7/8”
F 8PCS
lock washer
G 4PCS
end cap
H 1PC
allen wrench
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the surface with
rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.

BC961400TX
IRVING STORAGE BENCH
Assembly Instructions
Figure 1
Attach short shelf (1) to long
shelf (2) as shown.
Note: Make sure all the
finished edges on the
shelves are facing the
same direction.
Figure 2
Attach side panel (3) to the
assembled shelf using glue
(A) and wood dowel (B).
Note: Make sure the back
panel grooves on side
panels (3) are facing
towards the back of the
unit.

Figure 3
Using glue (A) and wood
dowel (B); attach the
assembled parts to bottom
panel (4) as shown.
Note: Make sure the
finished edge on the
bottom panel is facing the
same direction as the
finished edges on the rest
of the unit.
Figure 4
Slide back panel (6) along the
grooves of side panels (3).

Figure 5
Attach top panel (5) to the
assembled unit using glue (A)
and wood dowel (B) as
shown.
Figure 6
Attach short stretchers (7) to
bottom stretchers (9) using
short bolts (C). Tighten with
allen wrench (H)
Note: Do not fully tighten
the bolts until figure 8 is
complete.

Figure 7
Attach top stretchers (8) and
assembled bottom panel to
side panels (10) using lock
washers (F) and short bolts
(C) as shown. Tighten with
allen wrench (H).
Figure 8
Attach the assembled metal
base to cushion (11) using
medium bolts (D). Then,
attach end caps (G) to metal
base as shown.
Fully tighten all bolts using
allen wrench (H).
Note: Please do not sit on
the assembled parts before
putting the cushion into the
metal base or it will cause
the metal tubes to bend and
will cause assembly
problems.

Figure 9
Note: Please hold up the
assembled hutch from the
bottom panel while putting
the hutch into the metal
base.
Put the hutch into the
assembled metal base.
Secure the hutch with metal
base using long bolts (E) as
shown. Tighten using allen
wrench (H).
Your Irving storage bench is
now complete.
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell
, Texas
75019

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at serv[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form