Southern Enterprises Lozano HO0164A0TX User manual

For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
servi[email protected]
www.seifurniturestore.com
Please do not load more than 30 lb. when desktop is fully raised.
Page 1
HO0164A0TX/HO0164B0TX
Lozano Adjustable Height Desk
Assembly Instructions

A. Quantity
of 8
Bolt 1/4”x1/2”L
B. Quantity
of 14
Bolt 1/4”x1-1/4”L
C. Quantity
of 1
Allen Wrench
D. Quantity
of 4
Adjustable lever
E. Quantity
of 2
Screw Φ4.0x1-1/4”L
F. Quantity
of 2
Anchor
G
Quantity
of 4
Bracket
H
Quantity
of 2
Screw Φ4.0x1-5/8”L
I. Quantity
of 2
Small Bolt
J
Quantity
of 1
Handle
K
Quantity
of 2
Plastic Strap
1
Quantity
of 1
Desktop
2 Quantity
of 1
Side Leg Left
3
Quantity
of 1
Side Leg Right
Lozano Adjustable Height Desk
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface
like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before
beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the
incorrect hardware will cause damage
.
Page 2

4
Quantity
of 1
Shelf Panel
5
Quantity
of 1
Back Rail
6
Quantity
of 1
Middle Rail
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please call SEI
customer service at 1-800-633-5096.
Page 3
Assembly Tool Required:
No.2 Phillips Screwdriver, Hammer, Power Drill
(Not Included)

Figure 1
Attach Adjustable Levels (D)
to Side Legs (2/3) by hand.
Figure 2
Insert Back Rail (5) into Side
Legs (2/3).
Attach Middle Rail (6) to Side
Legs with Bolts (A).
Tighten Bolts (A) with Allen
Wrench (C).
Page 3
Lozano Adjuestable Height Desk
Assembly Instructions

Figure 3
Connect Back Rail (5) to Side
Legs (2/3) with Bolts (A).
Tighten Bolts (A) with Allen
Wrench(C).
Figure 4
Attach Shelf (4) to
pre-assembled unit from
Figure 3 with Bolts (B).
Tighten Bolts (B) with Allen
Wrench (C).
Page 4

Figure 5
Attach Brackets (G) to
Desktop (1) with Screws (H)
Tighten Screws (H) with
Phillips screwdriver (not
included).
Figure 6
Attach Handle (J) to Desktop
(1) with Small Bolts (I).
Tighten Small Bolts (I) with
Phillips screwdriver (not
included).
Page 5

Figure 7
Attach Desktop (1) to
pre-assembled unit from
figure 4 with Bolts (B).
Tighten Bolts (B) with Allen
Wrench (C).
Figure 8
Mark two desired locations on
the wall and drill two 3/16"
holes.
Insert plastic Anchors (F) into
the holes on wall, tapping
lightly with hammer (not
included) as needed.
Page 6

Figure 8
Attach Brackets (G) to the
wall using Screws (E).
Tighten Screws (E) using
Philips screwdriver.
Figure 9
Move this item close to the
wall and tie brackets (G)
together with Plastic Straps
(K).
Note: Anti-tipping hardware
must be used for this
product to avoid tipping
and injury.
Page 7

Figure 10
Now your Lozano Adjustable
Height Desk is ready to use!
To open top, simply lift up.
Guide back down to close.
The top can be adjusted to
four different height.
Figure 11
If the Desk is not level, adjust
the adjustable foot pads by
hand.
Page 9

Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time
if you have product issues or email us at [e-mail]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any issues
with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019