Southern Enterprises HO9290R0TX-WALNUT User manual

HO9290R0TX-WALNUT/
HO9292R0T X-ANTIQUE
W HITE
HO9291R0TX- BLACK
Fold-out Convertible Desk
Assembly Instruction
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
PO#
PATENT NUMBER D618939
Max Top Load =
20
lb
.

HO9290R0TX-WALNUT/HO9292R0TX-ANTIQUE WHITE/HO9291R0TX- BLACK
Fold-out Convertible Desk
Parts List
Please review all parts and hardware before disposing of any packaging. Call Customer
Service if missing hardware.
Using a screw that is too long will cause damage. Before beginning assembly, separate
each type of screw. Carefully study the screw diagrams below.
You may receive extra hardware with your unit.
1
Cabinet
2
Shelf
3
Shelf Holder
4
Plastic Anchor
5
Flat washer ∮1/4”x5/8”
6
Screw ∮5/32”x2”
7
Bracket
8
Screw 5/32”x3/4”
9
Screw ∮5/32”x1-1/4”
10
Level
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the finish
on wood part. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Please call manufacturer for assistance,
questions or parts.
Assembly Tool Required
No.2 Phillips Screw Driver
Quantity
Of 1 Quantity Of 2 Quantity
Of 8
Quantity
Of 4
Quantity
Of 2
Quantity
Of 3 Quantity
Of 3
Quantity
Of 1
Quantity
Of 1 Quantity
Of 1
Quantity
Of 1

HO9290R0TX-WALNUT/HO9292R0TX-ANTIQUE WHITE/HO9291R0TX- BLACK
Assembly Instruction
Step 1: Locate fold-out
convertible desk on a solid wall
and at a comfortable height off
the floor, normally eye level.
Step 2: Measure the wall and
mark the width and height of
desk as Figure 1.
Step 3: Measure the wall and
mark the location of the center
of each mounting holes. See
Figure 2.
NOTICE
The top 2 screws must be
attached to wall studs.
Using the level, make sure that
all marks are level on the wall.
Step 4: Using power drill (with
3/16″drill bit) drill holes on
bottom two marks.
Must be attached to
wall stud
Use Wall Anchors

Step 5: Attach bracket (7) by
using screw (8) to the bottom of
the unit as shown.
Step 6: Insert plastic anchors
(4)
into the two bottom mounting
holes.
(When doing this, you will need
a hammer help you).
Step 7: With an assistant, open
and attach cabinet (1) to wall
using washer (5), screw (6/9) as
shown.
Before using the work surface,
please make sure the hinges'
notch sits right on the gear so
that the leg can be fixed. You
may need a little push to secure
it

Step8: Insert pin (3) into the
hole of cabinet (1) as shown
then put on shelf (2).
Place level on top surface to
make sure product is level

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item Store/Website/Catalog
Please indicate color/size/style number
Style No Parts Letter Parts Description
Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019