Southern Enterprises Kellis KA326800TX User manual

Page |
1
PO#:
KA326800TX
Kellis Kitchen Cart
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.seifurniturestore
.com

Page |
2
1) Quantity
of 1
Top Panel
2) Quantity
of 1
Left Side Panel
3) Quantity
of 1
Right Side Panel
4) Quantity
of 1
Front Panel
5) Quantity
of 1
Back Panel
6)Quantity
of 1
Middle Panel
7) Quantity
of 1
Interior Left Side Panel
8) Quantity
of 1
Interior Right Side Panel
9) Quantity
of 1
Shelf Panel
10) Quantity
of 1
Bottom Panel
11) Quantity
of 2
Drawer Front Panel
12) Quantity
of 2
Left Drawer Side Panel
13) Quantity
of 2
Right Drawer Side Panel
14) Quantity
of 2
Drawer Back Panel
15) Quantity
of 2
Drawer Bottom Panel
Kellis Kitchen Cart
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
padded surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if
any hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your
hardware according to the pictures. Using the incorrect hardware will cause damage.

Page |
3
A) Quantity
of 20
Cam Bolts
B) Quantity
of 20
Cam Locks
C) Quantity
of 6
Wood Dowels Dia. 5/16"x1-1/4"
D)Quantity
o f 18
Bolt Dia. 1/4x1-1/4” L
E)Quantity
o f 12
Spring Washer Dia.1/4”
F)Quantity
o f 12
Flat washer Dia.1/4” x3/4”
G) Quantity
of 1
Allen Wrench
H) Quantity
of 16
Screw
Dia. 5/32”x 1L
I) Quantity
of 2
Knob
J) Quantity
of 4
Bolts
Dia. 5/32”x 1-1/8”L
K) Quantity
of 2
Towel rack
L) Quantity
of 2
Wheel with Brake
M) Quantity
of 2
Wheel without Brake
N) Quantity
of 4
Bolt Dia. 1/4x1-3/4” L
O) Quantity
of 1
Wrench
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth. Avoid
rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please call
SEI Customer Service at 1-800-633-5096.
Assembly Tool Required:
No.2 Phillips Screwdriver
(Not Included)

Page |
4
Figure 1
Attach Towel rack (K) to Side
Panels (2/3) using Bolts (N).
Tighten Bolts (K) with Allen
Wrench (G).
Attach Wheels (L/M) to
Side Panels (2/3) using
Wrench (O).
Figure 2
Align Cam Bolts (A) by hand.
Insert Cam Locks (B) into
corresponding holes on Middle
Panel (6) & Interior Side
Panels (7/8).
Screw Cam Bolts (A) into
threaded holes on Front Panel
(4) & Back Panel (5).
Attach Front and Back Panels
(4/5) to Middle Panel (6) and
Interior Side Panels (7/8) by
inserting Cam Bolts (A) into
corresponding holes until all
panels meet.
Tighten Cam Bolts (A) by
rotating Cam Locks (B)
clockwise using Phillips
screwdriver (not included).
Kellis Kitchen Cart
Assembly Instructions
4

Page |
5
Figure 3
Attach the Side Panels (2/3) to
Shelf Panel (9), Front and
Back Panels (4/5), and Bottom
Panel (10) with Bolts (D),
Spring Washers (E), and Flat
Washers (F).
Tighten Bolts (D) with Allen
Wrench (G).
Figure 4
Align Cam Bolts (A) by hand.
Insert Cam Locks (B) into
corresponding holes on Middle
Panel (6) & Side Panels (2/3).
Screw Cam Bolts (A) into
threaded holes on Top Panel
(1).
Attach Top Panel (1) to
pre-assembled unit from figure
3 by inserting Cam Bolts (A) &
Bolts (D) into corresponding
holes until all panels meet.
Tighten Cam Bolts (A) by
rotating Cam Locks (B)
clockwise using Phillips
screwdriver (not included).
Tighten Bolts (D) with Allen
Wrench (G).
1

Page |
6
Figure 5
Attach Drawer Side Panels
(12/13) to Drawer Back Panel
(14) using Screws (H).
Insert Drawer Bottom Panel
(15) into grooves of Panels
(12/13/14).
Attach Drawer Front Panel (11)
to assembled unit using
Screws (H).
Attach Knobs (I) to Drawer
Front Panel (11) using Bolts
(J).
Repeat steps for 2
nd
drawer.
Figure 6
Note: There is a lever on
male slide for drawer glide.
Push lever to either side in
order to detach male slide
from female slide.
Insert drawers into assembled
unit.
Make sure drawers glide
smoothly in and out.
11
12
13
14
15

Page |
7
Figure 7
Now your Kellis Kitchen Cart is
ready to use!

Page |
8
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas),
Mon-Fri 9am – 4pm CST, or email us at [e-mail]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any issues
with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Parts Replacement Form
Customer Service: 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019