Southern Enterprises HZ105200TX User manual

1
HZ105200TX
Mercer
Storage Cabinet
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com

2
HZ105200TX Mercer
Storage Cabinet
Assembly Instructions
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer .
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study
the screw diagrams below. You may receive extra hardware with your unit.
※ MAX. LOADING CAPACITY IS 10 LBS FOR DRAWER, 15 LBS FOR ADJUSTABLE SHELF.
1.
Allen Wrench
M4
Quantity Of 1
2.
Allen Wrench Screw
38mm
Quantity Of 8
3.
Spring Plate
1/4mmx12mm
Quantity Of 8
4.
Washer
1/4mmx16mm
Quantity Of 8
5.
Wood Dowel
∅8mmx30mm
Quantity Of 6
6.
Wood Dowel
∅6mmx25mm
Quantity Of 4
7.
Round Head Screw
6x3x12mm
Quantity Of 18
8.
Cam Bolt
Quantity Of 10
9.
Cam Lock
Quantity Of 10
10.
Screw
8mmx3.5mmx15mm
Quantity Of 6
11.
Door Handle
Quantity Of 3
12.
Pin
Quantity Of 4
13.
Plastic Anchor
Quantity Of 2
17.
5/8” Round Head
Screw
Quantity Of 2
14.
Metal Plate
Quantity Of 4
15.
1-1/2” Flat Head
Screw
Quantity Of 2
16.
Plastic Band
Quantity Of 2
Care and Cleaning Instructions:
Before using, wipe with a clean , dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
Tool required: Phillips screw driver
(Not Included)

3
HZ105200TX
Mercer
Storage Cabinet
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
PARTS LIST:
NO DESCRIPTION QTY NO DESCRIPTION QTY
A Top
Panel
1 J
Leg
4
B Bottom Panel 1 K Drawer Front Panel 1
C Left Side Panel 1 L Drawer Left Side Panel 1
D Right Side Panel 1 M Drawer Right Side Panel 1
E Left Glass Door 1 N Drawer Bottom Panel 1
F Right Glass Door 1 O Drawer Back Panel 1
G Back
Panel
1 P Drawer Supporting Bar 1
H Adjustable Shelf 1
I Drawer Horizontal Bar 1
CAM LOCK INSTRUCTION
CAM LOCK INSTRUCTION:
PANEL I THIS ITEM IS ASSEMBLED WITH CAM LOCK SET.
--SCREW CAM BOLT INTO PANEL II.
--INSERT CAM LOCK INTO PRE-DRILLED HOLE IN PANEL I, AND
CAM LOCK
--ROTATE CAM LOCK UNTILARROW IS IN LINE WITH HOLE ON PANEL EDGE.
--ALIGN CAM BOLT TO CAM LOCK HOLE ON PANEL I, AND PRESS
PANELS I & II T OGETHER.
--LOCK PANELS TOGETHER BY TURNING CAM LOCK CLOCKWISE UNTIL
TIGHT.
PANEL II
CAM LOCK DOWEL
NOTE :
FOLLOW INSTRUCTIONS LISTED BELOW IN THE PROPER SEQUENCE AS NUMBERED TO ASSURE
FAST, EASY AND CORRECT ASSEMBLY. HOUSE HOLD GLUE SUGGESTED FOR WOOD DOWEL.(eg.
ELMERS GLUE, NOT PROVIDED).SOLID ARROW MARK POINTS AT FRONT SIDE OR UP DIRECTION.
PHILLIP SCREW DRIVER IS REQUIRED(NOT PROVIDED).TWO PERSONS ARE RECOMMENDED TO
ASSEMBLE THIS ITEM.

4
3
4
HZ105200TX Mercer
Storage Cabinet
Assembly Instructions
1
Step 1:
2
J
Assemble the legs (J) and
bottom panel (B) using allen
wrench (1), allen wrench
J
screws (2), and hardware (3)
(4) as shown in figure 1.
J B
J
B
Figure 1
Step 1Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Pkwy Ste: 200
Coppell, Texas 75019

5
HZ105200TX Mercer
Storage Cabinet
Assembly Instructions
C
5 8
9
I
D
Step 1:
Insert the cam bolts (8) into
the left and right side panel
(C) and (D).
Step 2:
Assemble the left side panel
(C), right side panel (D) and
drawer horizont al bar (I )
using wood dowels (5), and
tighten cam bolts (8) with
cam locks (9) from the pre-
drilled holes as shown in
figure 2.
Figure 2

6
HZ105200TX Mercer
Storage Cabinet
Assembly Instructions
Step 1:
Join the top panel (A) and
A
bottom panel (B) to the
assembly from figure 2 using
wood dowels (5) as shown
in figure 3.
D
Step 2:
C
I Switch the lock as
shown in figure 3.
5
ON
OFF
B
Figure 3

7
HZ105200TX Mercer
Storage Cabinet
Assembly Instructions
STEP 4
Step 1:
7
Tighten the back panel (G)
to the assembly using round
head screws (7) as shown in
figure 4.
G
Figure 4

8
HZ105200TX Mercer
Storage Cabinet
Assembly Instructions
Step 1:
Insert the pins (12) at the
12
desired position and place
the adjustable shelf (H)
H
above the pins as shown in
figure 5.
Figure 5

9
HZ105200TX Mercer
Storage Cabinet
Assembly Instructions
Step 1:
Assemble the door panels
(E) and (F) to the assembly
as shown in figure 6.
F
E
Step 2:
Tighten the door handles
(11) to the door panels (E)
and (F) using screws (10)
through the pre-drilled holes
11
as shown in figure 6.
10
Figure 6

10
6
STEP 6
HZ105200TX Mercer
Storage Cabinet
Assembly Instructions
8
M
O
Step 1:
P
Insert cam bolts (8)
L
into the panels (L) (M) and
9
(O).
N
Step 2:
Insert wood dowels (6) into
the panels (P), and cam locks
into the panel (O). Assemble
6
8
as shown in figure 7.
6
K
9
Figure 7
Step 3:
10
Insert the drawer bottom
panel (N) into the assembly
as shown in figure 7.
11
Step 4:
T ighten the door handle
(11) on drawer front panel
(K) using screws (10), and
assemble the drawer front
panel (K) to the assembly
using hardware (6) (8) (9) as
shown in figure 7.

11
HZ105200TX Mercer
Storage Cabinet
Assembly Instructions
Step 1:
Insert the drawer into the
assembly as shown in figure
8.
Figure 8

12
HZ105200TX Mercer
Storage Cabinet
Assembly Instructions
T O A V OID ITEM TI L TING
FORWARD. MOUNTING TO THE
WALL IS REQUIRED.
13
TO AVOID ITEM TILTING FORWARD.
14
MOUNTING TO THE WALL IS
15
RECOMMENDED.
16
17
Figure 9
Step 1:
TIGHTEN THE METAL PLATE (14) TO
THE REAR OF THE TOP PANEL BY
USING 5/8” ROUND HEAD SCREW
(17).
Step 2:
PLACE THE CABINET A T THE
DESIRED POSITION. MARK T HE
INSER TION POINTS FOR THE
PLASTIC ANCHOR (13).
Step 3:
USING THE PLASTIC ANCHOR
(13) INCLUDED OR THE PROPER
HARDW ARE FOR YOUR W ALL
TYPE. DRILL 1/4" HOLE; INSERT
THE PLASTIC ANCHOR (13) INTO
THE W ALL. AND TIGHTEN THE
METAL PLATE (14) TO THE PLASTIC
ANCHOR (13) BY USING 1-1/2" FLAT
HEAD SCREW (15).
Step 4:
USING PLASTIC BAND (16) T O
CONNECT TWO METAL PLATES (14)
AS SHOWN.

600 Freeport Parkwa
y
,
Suite 200
Coppell, Texas 75019
13
Parts Replacement Form
Customer Information
Name Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/si e/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be
honored within this time frame. Parts will not be available for items arriving fully assembled. We do
not recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under
no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-
Fri Central time if you have product issues or email us at service@
hollyandmartin.com
. Please ask
for customer service representative for issues involving damages or replacement parts. Please ask for
technical assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Service
1-800-633-5096
[email protected]
Southern Enterprises, Inc.