Southern Enterprises HF425000TX User manual

HF425000TX
Conlin Wall Mount
Headboard-Queen Size
Assembly Instru tions
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-096
[email protected]
www.seidal.com
PO#12981
QUEEN BED

HF42
5000
TX
Conlin Wall Mount Headboard-Queen Size
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Assembly Tool Required
No.2 Phillips Screwdriver
frame 1 frame 2
bolt
wall wedge 5-7/8” length
washer Nut
wrench
allen key
dowel
paper ruler 60”x38” wall anchor long flat screw Ø11/64” x 2-3/8”
Bracket
1
4pcs 2
8pcs 3
4pcs
4
1pc 6
3pcs
7
1pc
5
1pc
10
2pcs
11
2pcs
short flat screw Ø1/8” x 19/32”
10pcs
8
9
10pcs
A 1pc B
1pc C
4pcs

HF42
5000TX
Conlin Wall Mount Headboard-Queen Size
Assembly Instructions
Attach frame 1 (A) to frame 2 (B) with 3pcs dowel (6), 4pcs bolt (1), 8pcs washer (2) and 4pcs nut
(3). Using wrench (4) and allen key (5) fully tighten all nuts (3) as shown.
.
6
4
A
B
2
3
2
5
1

Use the paper ruler (7) on
wall and mark hole
locations for position of
4pcs wall wedges (C) and
2pcs brackets (10).
Drill holes at marked hole
locations into the wall and
insert 10pcs wall anchors
(8) into the drilled holes.
Tip: Make sure all hole
marks are positioned
evenly at the same height.
Attach 4pcs wall wedges
(C) to the holes in the wall
with 8pcs long flat screws
(9). Using phillips
screwdriver, fully tighten all
long flat screws (9) as
shown.
Attach 2pcs brackets (10)
with 2pcs long flat screws
(9). Using phillips
screwdriver, partially
tighten long flat screws (9)
as shown.
8
Hollow wall
8
7
C
C
C
C
9
8
C
Hollow wall
Ø1/
4
”
10
9

Attach headboard to wall
by hooking the bar on the
back of headboard to wall
wedges (C) as shown.
Tip: Headboard back cross
bar has to rest on four wall
wedges.
Secure the headboard
with 2pcs short flat screws
(11) to the bracket at
headboard as shown.
C
11
Headboard

Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your
receipt of the product. Replacement, if available, will be honored within this time frame.Parts will not be available for items arriving fully assembled.
We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s).If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time if you have product issues or
email us at [e-mail]. Please ask for customer service representative for issues involving damages or replacement parts. Please ask
for technical assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/si e/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-
096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite
200
Coppell, Texas 7 019