Southern Enterprises MS663200TX User manual

Page |
1
MS663200TX
Heyburn Industrial TV/Media Stand
Assembly Instructions
PO#：13499
For assistance with assembly, contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[e-mail]
www.seidal.com

Page |
2
A.
Quantity
of 1
Top Panel
B.
Quantity
of 1
Fixed Shelf
C.
Quantity
of 1
Bottom Panel
D.
Quantity
of 1
Middle Panel
E.
Quantity
of 1
Left Panel
F.
Quantity
of 1
Right Panel
G.
Quantity
of 1
Top Back Panel
H.
Quantity
of 1
Bottom Back Panel
I.
Quantity
of 1
Left Door
J.
Quantity
of 1
Right Door
K.
Quantity
of 2
Adjustable Panels
L.
Quantity
of 1
Middle Leg
1
.
Quantity
of 16
Cam-Bolts
2
.
Quantity
of 16
Cam-Locks
3
.
Quantity
of 16
Cam-Covers
∅
20
Heyburn Industrial TV/Media Stand
Parts List
Please check packaging for all parts and hardware before discarding. Before beginning assembly, separate each
type of hardware. Carefully study the diagrams below and check that you have all parts indicated.
Call Customer Service if missing hardware. Using the incorrect hardware will cause damage.

Page |
3
4.
Quantity
of 2
Magnets
5.
Quantity
of 4
Round Wood Screws
∅
3×12mm
6.
Quantity
of 31
Round Wood Screws
∅
3×15mm
7.
Quantity
of 8
Wood Dowels
∅
8×30
8.
Quantity
of 8
Flat Wood Screws
∅
3×13mm
9.
Quantity
of 8
Shelf Pins
10.
Quantity
of 2
Knobs
11.
Quantity
of 4
Bolts
∅
5/32"×12
12.
Quantity
of 4
Brackets
1
3
.
Quantity
of 4
Wall Screws
∅
8x20mm
14.
Quantity
of 2
Plastic Straps
15.
Quantity
of 4
Plastic Anchors
∅
8×30
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please call
Customer Service at 1-800-633-5096.
Assembly Tool Required No.2 Phi
Assembly Tool Required:
No.2 Phillips Screwdriver (Not included)

Page |
4
Figure 1
Start scre
wing
with fingers
to help align
Cam-Bolts.
Insert Cam-Locks (2) into holes on Vertical
Panel (D).
Screw Cam-Bolts (1) and insert Wood
Dowels (7) into holes on Fixed Shelf (B)
and Bottom Panel (C).
Attach Vertical Panel (D) to Bottom Panel
(C) and Fixed Shelf (B).
Tighten by rotating Cam-Locks (2)
clockwise with Phillips screwdriver.
Cover Cam-Locks (2) with Cam-Covers (3).
Figure 2
Insert Cam-Locks (2) into holes on
assembled unit.
Screw Cam-Bolts (1) and insert Wood
Dowels (7) into holes on Left Panel (E) and
Right Panel (F).
Attach Left Panel (E) and Right Panel (F) to
assembled unit.
Tighten by rotating Cam-Locks (2)
clockwise with Phillips screwdriver.
Cover Cam-Locks (2) with Cam-Covers (3).
Attach Middle Leg (L) to Bottom Panel (C)
by hand.
Heyburn Industrial TV/Media Stand
Assembly Instructions
BD
C
1
7
2
1
B
C
E
F
7
7
1
1
1

Page |
5
Figure 3
Insert Cam-Locks (2) into holes on
assembled unit.
Screw Cam-Bolts (1) and insert Wood
Dowels (7) into holes on Top Panel (A).
Attach Top Panel (A) to assembled unit.
Tighten by rotating Cam-Locks (2)
clockwise with Phillips screwdriver.
Cover Cam-Locks (2) with Cam-Covers (3).
Figure 4
Attach Upper Back Panel (G) and Lower
Back Panel (H) to back of assembled unit
with Round Head Screws (6).
Attach Brackets (12) with Round Head
Screws (6) on Upper Back Panel (G)
with Philips screwdriver.
A
E
1
23
32
1
7
G
H
12
6
6
6
12

Page |
6
Figure 5
Start with fingers to help align screws
before using screwdriver.
Attach Magnet (4) to assembled unit with
Round Head Screws (5).
Attach Left Door (I) and Right Door (J) to
assembled unit with Screws (8).
Insert Shelf Pins (9) into holes on unit.
Attach Knobs (10) through Left Door (I) and
Right Door (J) with Bolts (11).
Tighten Screws (8) with Philips
screwdriver.
Figure 6
Place Adjustable Shelves (K) onto Shelf
Pins (9).
K
K
E
F
J
I9

Page |
7
Figure 7
Mark two desired locations on wall for each
Bracket (12), same distance as Brackets
(12) attached to back of unit.
Drill two 3/16" holes on wall for each
Bracket (12).
Insert Plastic Anchors (15) into holes on
wall (use a hammer to help you).
Attach Brackets (12) to wall using Screws
(13). Tighten screws with Philips
screwdriver.
Move item close to wall Brackets (12) and
tie in all Brackets (12) with Plastic Chains
(14).
Anti-tipping hardware must be
used for this product to avoid
tipping and in ury.
Now your Heyburn Industrial TV/Media
Stand is ready to use!
WALL
14
12 12

Page |
8
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame.
Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are
not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90
days of your receipt, we are under no obligation to provide parts or replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas),
Mon-Fri 9am – 4pm CST, or email us at [e-mail]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any issues with
product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No. Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service: 1-800-633-5096
servic[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019

Page |
9
Page 9
CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 50” and
supports up to 85 lb.
Each adjustable shelf should not be loaded with more than 20 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the maximum sizes and
weights indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on back panel.
Model: MS663200TX
Heyburn Industrial TV/Media Stand
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas, 75019