Southern Enterprises CK548200TX User manual

Page |
1
PO#:
CK548200TX
Amherst End Table Trunk
Assembly Instructions
For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service: 1-800-633-5096
[email protected]om
www.seidal.com

Page |
2
1. Quantity
of 1
Top Panel
2. Quantity
of 1
Left Side Panel
3. Quantity
of 1
Right Side Panel
4. Quantity
of 1
Front Panel
5. Quantity
of 1
Back Panel
6. Quantity
of 1
Bottom Panel
7. Quantity
of 4
Legs
A. Quantity
of 16
Cam Bolts
B. Quantity
of 16
Cam Locks
C. Quantity
of 8
Wood Dowels
Ø 8mm x 30mm
Amherst End Table Trunk
Parts List
Please review all parts and hardware before disposing of any packaging.
Before beginning assembly, separate each type of hardware. Carefully study the diagrams below and check that
you have all parts indicated. Call Customer Service if missing hardware. Using the incorrect hardware will cause
damage. You may receive extra hardware with your unit.

Page |
3
D. Quantity
of 1
Left-Arm Hinge
E. Quantity
of 1
Right-Arm Hinge
F. Quantity
of 8
Screws Ø 1/8” x 1/2”L
G. Quantity
of 8
Bolts Ø 1/4”x2-3/4” L
H. Quantity
of 1
Allen Wrench 1/4”
I. Quantity
o f 2
Hinges
J. Quantity
o f 16
Screws Ø 1/8” x 5/8”L
K. Quantity
of 8
Cotton Mats
L. Quantity
of 2
Adhesive Pads
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the
finish. Avoid rubbing or scratching the surface
with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Assembly Tool Required
No.2 Phillips Screwdriver
(Not Included)

Page |
4
Figure 1
Start screwing with fingers to help align
Cam Bolts.
Screw Cam Bolts (A) into corresponding holes
on Left and Right Side Panels (2 & 3).
Attach Left Side Panel (2) and Right Side
Panel (3) to Bottom Panel (6) by inserting Cam
Bolts (A) into corresponding holes.
Insert Cam Locks (B) into holes on Bottom
Panel (6).
Tighten by rotating Cam Locks (B) clockwise
with Phillips screwdriver.
Figure 2
Screw Cam Bolts (A) and insert Wood Dowels
(C) into holes on Front Panel (4).
Attach Front Panel (4) to assembled unit by
inserting Cam Bolts (A) and Wood Dowels (C)
into corresponding holes.
Insert Cam Locks (B) into holes on Bottom
Panel (6), Left Side Panel (2) and Right Side
Panel (3).
Tighten by rotating Cam Locks (B) clockwise
with Phillips screwdriver.
Cover Cam Locks (B) with Cotton Mats (K).
Amherst End Table Trunk
Assembly Instructions

Page |
5
Figure 3
Screw Cam Bolts (A) and insert Wood Dowels
(C) into holes on Back Panel (5).
Attach Back Panel (5) to assembled unit by
inserting Cam Bolts (A) and Wood Dowels (C)
into corresponding holes.
Insert Cam Locks (B) into holes on Bottom
Panel (6), Left Side Panel (2) and Right Side
Panel (3).
Tighten by rotating Cam Locks (B) clockwise
with Phillips screwdriver.
Cover Cam Locks (B) with Cotton Mats (K) as
shown.
Figure 4
Attach Legs (7) to Bottom Panel (6) using Bolts
(G).
Tighten Bolts with Allen Wrench (H) as shown.
H
G

Page |
6
Figure 5
Attach Hinges (I) to Back Panel (5) and Top (1)
using Screws (J).
Open Top (1), attach Arm Hinges (D/E) to Top
(1) and trunk base using Screws (F).
Tighten Screws with Phillips screwdriver.
Place Adhesive Pads (L) on top corners of
Front Panel (4) as shown.
Close Top (1) and let it drop down slowly.
Figure 6
Now your Amherst End Table Trunk is ready to
use!

Page |
7
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and
we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas),
Mon-Fri 9am – 4pm CST, or email us at s[email protected]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any issues
with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Parts Replacement Form
Customer Service: 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019