Southern Enterprises MS904500TX User manual

1
MS904500TX
Liam Media Console
For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com

2
MS904500TX Liam
Media Console
Assembly Instructions
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer .
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study
the screw diagrams below. You may receive extra hardware with your unit.
※ MAX. LOADING CAPACITY IS 175 LBS FOR TOP PANEL, 20 LBS PER SHELF, 10
LBS FOR DRAWER.
1.
allen wrench
M4
4.
washer
1/4mmx16mm
7.
round head
screw
6x13x12mm
Quantity
Of 1
Quantity
Of 8
Quantity
Of 22
2.
bolt
∅1/4mmx15mm
5.
wood dowel
∅8mmx30mm
8.
door handle
Quantity
Of 8
Quantity
Of 12
Quantity
Of 3
3.
lock washer
1/4mmx12mm
6.
steel leg
Quantity
Of 8
Quantity
Of 2
9.
screw
7x3.5x15mm
12.
cam lock
Quantity
Of 8
Quantity
Of 8
10.
hinge
13.
screw
8x3.5x19mm
Quantity
Of 4
Quantity
Of 6
11.
cam bolt Quantity
Of 8
Care and Cleaning Instructions:
Before using, wipe with a clean , dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Tool required: Phillips screw driver
(Not Included)

3
MS904500TX
Liam Media Console
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
PARTS LIST:
NO DESCRIPTION QTY NO DESCRIPTION QTY
A TOP PANEL 1 J CENTER BACK PANEL 1
B BOTTOM PANEL 1 K DRAWER FRONT PANEL 1
C LEFT PANEL 1 L DRAWER LEFT PANEL 1
D RIGHT PANEL 1 M DRAWER RIGHT PANEL 1
E RIGHT CENTER DIVIDER 1 N DRAWER BOTTOM PANEL 1
F LEFT DOOR PANEL 1 O DRAWER BACK PANEL 1
G RIGHT DOOR PANEL 1 P FIXED SHELF 1
H LEFT BACK PANEL 1 Q LEFT CENTER DIVIDER 1
I RIGHT BACK PANEL 1
CAM LOCK INSTRUCTION
CAM LOCK INSTRUCTION:
PANEL I THIS ITEM IS ASSEMBLED WITH CAM LOCK SET.
--SCREW CAM BOLT INTO PANEL.
--INSERT CAM LOCK INTO PRE-DRILLEDHOLE IN ADJACENT PANEL .
CAM LOCK
--ROTATE CAM LOCK UNTILARROW IS IN LINE WITH HOLE ON PANEL EDGE.
--ALIGN CAM BOLT TO CAM LOCK HOLE ON ADJACENT PANEL, AND PRESS
PANELS T OGETHER.
--LOCK PANELS TOGETHER BY TURNING CAM LOCK CLOCKWISE UNTIL
TIGHT.
PANEL II
CAM BOLT
NOTE :
FOLLOW INSTRUCTIONS LISTED BELOW IN THE PROPER SEQUENCE AS NUMBERED TO ASSURE
FAST, EASY AND CORRECT ASSEMBLY. HOUSE HOLD GLUE SUGGESTED FOR WOOD DOWEL.(eg.
ELMERS GLUE, NOT PROVIDED).SOLID ARROW MARK POINTS AT FRONT SIDE OR UP DIRECTION.
PHILLIP SCREW DRIVER IS REQUIRED(NOT PROVIDED).TWO PEOPLE ARE RECOMMENDED TO
ASSEMBLE THIS ITEM.

4
1
MS904500TX
Liam Media Console
Assembly Instructions
1
2
34
Attach the steel legs (6)
6 with bottom panel (B) using
1
hardware (1) (2) (3) (4) as
shown in figure 1.
2
3
4
6
B
B
Figure 1
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Pkwy Ste: 200
Coppell, Texas 75019

5
MS904500TX
Liam Media Console
Assembly Instructions
Attach the right center
divider (E), left center divider
(Q) and fixed shelf (P) using
E wood dowels (5) as shown
in figure 2.
5
E
5 P
P
Q
Q
Figure 2

6
5
MS904500TX
Liam Media Console
Assembly Instructions
E
Assemble the panels (E), (Q)
P
and (P) with bottom panel (B)
Q
using wood dowels (5) as
shown in figure 3.
Switch the lock as
B
shown in figure 3.
ON
OFF
Figure 3

7
Step 4
MS904500TX
Liam Media Console
Assembly Instructions
ON
OFF
Assemble the left panel
(C) and right panel (D) to
the assembled unit using
wood
dowels (5) as shown in
D
figure 4.
E Switch the lock as
shown in figure 4.
P
C
Q
5
5
Figure 4

8
Step 5
MS904500TX
Liam Media Console
Assembly Instructions
ON
OFF
Assemble the top panel (A)
to the assembled unit using
wood dowels (5) as shown
infigure 5.
A
Switch the lock as
D shown in figure 5.
E
P
QB
C
5
Figure 5

9
O
MS904500TX
Liam Media Console
Assembly Instructions
12
11
Install cam locks (12) into the
drawer back panel (O).
Assemble the drawer left panel
(L), drawer right panel (M), and
drawer back panel (O) using
cam bolts (11) as shown
M
in figure 6.
O
M
L
L
Insert the drawer bottom panel
N
(N) into the assembly as shown
11
in figure 6.
K
12
13
Install cam locks (12) into the
panels (L) and (M).
Attach the door handle (8) to the
drawer front panel (K) using
screws (13) through the pre-
drilled holes as shown in figure 6.
Figure 6
8
Assemble the drawer front panel
(K) to the assembly using cam
bolts (11) as shown in figure 6.

10
MS904500TX
Liam Media Console
Assembly Instructions
Attach the back panels (H),
(J), and (I) to the assembled
unit using screws (7) as
shown in figure 7.
I
J
H
7
Figure 7