Southern Enterprises Madison EN516100TX User manual

1
EN516100TX Madison Display Shelf- Chocolate
EN516200TX Madison Display Shelf- Black
EN516300TX Madison Display Shelf- White
Assembly Instructions
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com

2
MAX
20lbs
capacity
8
Suggested tools as below list
Pencil Power drill Level
Bit 3/16” Tape measure
Madison Display Shelf
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
A Quantity
Of 2
Plastic anchor 6 x 30mm
B
Quantity
Of 2
Screw 8 x 35mm
C
Quantity
Of 1
Shelf
D Quantity
Of 1
Levels
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call customer service at 1-800-633-5096 for
assistance, questions, or parts.
Assembly Tool Required
(Not Included)

3
Figure 1
Drill holes on the wall matching
the holes on the back of the
shelf (C).
Insert plastic anchors (A) into
the holes. Then insert the
screws (B) into the plastic
anchors (A) with philips
screwdriver.
Figure 2
Hang the shelf (C) onto wall.
Place level on top to insure
product is level.
Now you shelf is ready to use.
M
adison
D
isplay
S
helf
Assembly Instructions

4
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity
Needed
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Parts Replacement Form

5
CAUTION
Max shelf load capacity is achieved by mounting screw into studs or cement walls.
If mounting to sheet rock (cavity wall) it is advisable to mount at least 1 screw (without anchor)
directly to a wall stud or studs. However do not leave either end of mounting bracket unsupported
by at least one anchor. For hollow wall mounting you can use any of the holes in the back plate to
suit where you require the mounting screws positioned.
Note : Pipe bracket has a built in safety design feature. Pipes have a slight upward angle to
prevent floating shelf from fogging when shelf is loaded. Weight ratings are E.D.L.(evenly
distributed load)