Southern Enterprises FA9334A0TX User manual

For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
Page 1
FA9334A0TX/FA9334B0TX
Gatlinburg Bookshelf Fireplace -
Espresso
Assembly Instructions
PO#

(1) Quantity
Of 1
Bottom Panel
(2) Quantity
Of 1
Left Outside Pilaster
(3) Quantity
Of 1
Right Outside Pilaster
(4) Quantity
Of 1
Cross Brace
(5) Quantity
Of 1
Left Shelf Panel
(6) Quantity
Of 1
Right Shelf Panel
(7) Quantity
Of 1
Left Side Panel
(8) Quantity
Of 1
Middle Panel
(9) Quantity
Of 1
Right Side Panel
(10) Quantity
Of 1
Top Panel
(11) Quantity
Of 1
Upper Back Panel
(12) Quantity
Of 1
Middle Back Panel
(13) Quantity
Of 1
Lower Back Panel
14) Quantity
Of 1
Adjustable Shelf
(15) Quantity
Of 1
Wood Block
(16) Quantity
Of 1
Firebox
(in a separate carton)
Page 2
Gatlinburg Bookshelf Fireplace
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if
hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your
hardware according to the pictures. Using the incorrect hardware will cause damage.

A Quantity
Of 34
Wood Dowel
B Quantity
Of 19
Cam Bolt
C Quantity
Of 19
Cam Lock
D Quantity
Of 2
Plastic Cover
E Quantity
Of 10
Bolt Ø1/4”*1-1/4”
F Quantity
Of 29
Screw
G Quantity
Of 4
Shelf Holder
H Quantity
Of 2
Flat Head Screw
I Quantity
Of 4
Screw
J Quantity
Of 4
Bracket
K Quantity
Of 4
Plastic Anchor
L Quantity
Of 4
Screw
M Quantity
Of 2
Plastic Strap
N Quantity
Of 10
Metal Washer
O Quantity
Of 1
Allen Wrench
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Page 3
Gatlinburg Bookshelf Fireplace
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if
hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your
hardware according to the pictures. Using the incorrect hardware will cause damage.
Assembly Tool Required No.2
Phillips Screwdriver
(Not Included)

Page 4
Figure 1
Insert 2pcs cam locks (C) into pre-drilled
holes on cross brace (4).
Screw 2pcs cam bolts (B) into
pre-drilled holes on left outside pilaster
(2) and right outside pilaster (3). Attach
left outside pilaster (2) and right outside
pilaster (3) to cross brace (4) by
inserting wood dowels (A) and cam
bolts (B) into corresponding pre-drilled
holes until outside pilaster (2 , 3) and
cross brace (4) meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver (not
included) as shown in figure 1.
Figure 2
Insert 1pcs cam lock (C) into pre-drilled
hole on cross brace (4). Screw 1pcs
cam bolt (B) into pre-drilled hole on left
shelf panel (5). Attach cross brace (4) to
left shelf panel (5) by inserting wood
dowels (A) and cam bolt (B) into
corresponding pre-drilled holes until left
shelf panel (5) and cross brace (4)
meet.
Tighten by rotating cam lock (C)
clockwise with Phillips screwdriver (not
included) as shown in figure 2.
Gatlinburg Bookshelf Fireplace
Assembly Instructions
(2)
(3)
(4)
A
A
A
AB
BC
C
(5)
(3)
(4) (2)
A
A
BC

Page 5
Figure 3
Insert 10pcs cam locks (C) into
pre-drilled holes on preassembled unit
from figure 2. Screw 10pcs cam bolts
(B) into pre-drilled holes on left side
panel (7) and middle panel (8). Attach
preassembled unit from figure 2 to left
side panel (7) and middle panel (8) by
inserting wood dowels (A) and cam
bolts (B) into corresponding pre-drilled
holes until preassembled unit from
figure 2 and left side panel (7) and
middle panel (8) meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver (not
included).
Figure 4
Insert 4pcs cam locks (C) into pre-
drilled
holes on right shelf panel (6). Screw
4pcs cam bolts (B) into pre-drilled holes
on middle panel (8) and right side panel
(9). Attach right shelf panel (6) to
preassembled unit from figure 3 and
right side panel (9) by inserting wood
dowels (A) and cam bolts (B) into
corresponding pre-drilled holes until
preassembled unit from figure 3 and
right shelf panel (6) and right side panel
meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver (not
included).
(3)
(2)
(5)
(8)
(7)
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
BCC
C
C
C
C
C
(8)
(9)
(6)
A
A
AA
B
B
B
B
C
C
C
(5) (7)
C

Page 6
Figure 5
Insert 2pcs cam locks (C) into pre-drilled
holes on righ
t side panel (9). Screw 2pcs
cam bolts (B) into pre-drilled holes on
bottom panel (1). Attach bottom panel
(1) to preassembled unit from figure 4 by
inserting wood dowels (A) and cam bolts
(B) into corresponding pre-drilled holes
until preassembled unit from figure 4
and bottom panel (1) meet.
Tighten by rotating cam locks (C)
clockwise with Phillips screwdriver (not
included). Cover cam lock holes with
plastic cover (D).
Use 4pcs bolts (E) through metal
washer (N) to connect preassembled
unit from figur
e 4 to bottom panel (1).
Tighten bolts (E) with Allen wrench (O).
Figure 6
Attach top panel (10) to preassembled
unit from figure 5 by inserting wood
dowels (A) to corresponding pre-drilled
holes until top panel (10) and
preassembled unit from figure 5 meet.
Insert 6pcs bolts (E) through metal
washers (N) to connect top panel (10) to
preassembled unit from figure 5 using
pre-drilled holes, then tighten bolts (E)
with Allen wrench (O).
(7)
(8)
(9)
(1)
A
A
A
A
A
A
A
B
B
C
CD
D
E
E
E
NO
(10)
(7) (8)
(9)
AA
AA
AA
EE
EE
EE
N
N
N
N
NN
O

Page 7
Figure 7
Insert upper back panel (11), middle back
panel (12) and lower back panel (13) into
grooves of preassembled unit from figure
6 back.
Tighten screws (F) with Phillips
screwdriver (not included).
Figure 8
Insert shelf holders
(G) into desired holes
of the middle panel (8) and right side
panel (9). Then put side adjustable shelf
(14) on the shelf holders (G).
(9)
(8)
(14)
G
GGG
(8)
(7)
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
FFFF
FF

Page 8
Figure 9
Put firebox (16) into the back of the unit.
Figure 10
Attach brackets (J) to upper back panel
(11) using screws (I).
Tighten screws (I) using Philips
screwdriver.
Mark two desired locations on the wall and
drill two 3/16" holes.
Insert plastic anchors (K
) into the two holes
on wall as shown. Use a hammer to insert
the plastic anchors until they are flush with
the wall.
Then attach the brackets (J) onto the wall
using screws (L).
Tighten screws (L) using Philips
screwdriver.

Page 9
Figure 9
Move this item close to the wall brackets
(J) and tie in all brackets (J) together with
plastic strap (M) as shown in diagram.
Anti-
tipping hardware must be used for
this product to avoid tipping and injury.
Figure10
Now your new fireplace is ready to use.

Customer Information
Name
Address
City/State/Zip Code
P one Number
Please indicate w ere you purc ased t is item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact t e retailer t at you purc ased from for returns.
Parts Replacement Form