Southern Enterprises Hulen BC403700TX User manual

Page | 1
For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]m
www.seidal.com
BC403700TX
Hulen Shoe Storage Bench
Assembly Instructions
PO#:

Page | 2
Hulen Shoe Storage Bench
Assembly Instructions
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
A.
Quantity
of 1
Top Panel
B.
Quantity
of 1
Bottom Panel
C.
Quantity
of 1
Fixed Shelf Panel
D.
Quantity
of 1
Left Side Panel
E.
Quantity
of 1
Right Side Panel
F.
Quantity
of 1
Left Vertical Panel
G.
Quantity
of 1
Middle Vertical Panel
H.
Quantity
of 1
Right Vertical Panel
I.
Quantity
of 1
Back Panel
J.
Quantity
of 4
Drawer Front Panel
K.
Quantity
of 4
Drawer Left Panel
L.
Quantity
of 4
Drawer Right Panel

Page | 3
M.
Quantity
of 4
Drawer Back Panel
N.
Quantity
of 4
Drawer Bottom Panel
O.
Quantity
of 4
Leg
P.
Quantity
of 1
Center Leg
Q.
Quantity
of 1
Cushion
1.
Quantity
of 16
Cam Bolt
2.
Quantity
of 16
Cam Lock
3.
Quantity
of 20
Wood Dowel Ø8x30mm
4.
Quantity
of 48
Flat Head Screw
∅
1/8"*1/2"
5.
Quantity
of 4
Bolt for Handle
∅
5/32"x3/4"
6.
Quantity
of 16
Round Head Screw
Ø 1/8” x 5/8”L
(for Back Panel )
7.
Quantity
of 4
Handle
8.
Quantity
of 4
Medium
Bolt
∅
1/4"x1-1/2"L
9.
Quantity
of 4
Large
Bolt
∅
5/16"x2"L

Page | 4
10.
Quantity
of 1
Allen Wrench
11.
Quantity
of 4
Flat Washer
12.
Quantity
of 4
Spring Washer
13.
Quantity
of 32
Screw
∅
1/8"x
1
"
14.
Quantity
of 4
Female Slide Left
15.
Quantity
of 4
Female Slide Right
16.
Quantity
of 4
Male Slide Left
17.
Quantity
of 4
Female Slide Right
18.
Quantity
of 8
Cover
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)

Page | 5
Figure 1
Screw with fingers to help align screws
before using screwdriver.
Attach Female Slide Left (14) to Left
Side Panel (D) using Flat Head Screws
(4).
Tighten Flat Head Screws (4) with
Phillips screwdriver.
Figure 2
Attach Female Slide Right (15) to Right
Side Panel (E) using Flat Head Screws
(4).
Tighten Flat Head Screws (4) with
Phillips screwdriver.
Hulen Shoe Storage Bench
Assembly Instructions

Page | 6
Figure 3
Attach Female Slide Right (15) to Left
Vertical Panel (F) using Flat Head
Screws (4).
Tighten Flat Head Screws (4) with
Phillips screwdriver.
Figure
4
Attach Female Slide Left (14) to Right
Vertical Panel (H) using Flat Head
Screws (4).
Tighten Flat Head Screws (4) with
Phillips screwdriver.

Page | 7
Figure 5
Insert Left Vertical Panel (F), Middle
Vertical Panel (G) and Right Vertical
Panel (H) into the grooves of Fixed Shelf
Panel (C) as shown.
Note: Make sure the holes for the
Cam Locks are facing down on Panel
(C) as shown. The finished edges on
each panel should be facing the
direction.
Figure 6
Screw with fingers to help align cam
bolts before using screwdriver.
Insert Cam Locks (2) into corresponding
holes on assembled unit from Figure 5
Screw Cam Bolts (1) and insert Wood
Dowels (3) into corresponding holes on
Left Side Panel (D) and Right Side
Panel (E).
Attach Left Side Panel (D) and Right
Side Panel (E) to assembled unit by
inserting Wood Dowels (3) and Cam
Bolts (1) into corresponding holes until
Left Side Panel (D) Right Side Panel (E)
and the assembled unit from Figure 3
meet.
Tighten by rotating Cam Locks (2)
clockwise with Phillips screwdriver.

Page | 8
Figure 7
Attach Legs (O) to Bottom Panel (B)
using Bolts (9), Spring Washers (12) and
Flat Washers (11).
Tighten Bolts (9) with Allen Wrench (10).
Attach Center Leg (P) to Bottom Panel
(B) by hand.
Figure 8
Insert Cam Locks (2) into corresponding
holes on assembled unit from Figure 5.
Screw Cam Bolts (1) and insert Wood
Dowels (3) into corresponding holes on
Top Panel (A) and Bottom Panel (B).
Attach Top Panel (A) and Bottom Panel
(B) to assembled unit from Figure 6 by
inserting Wood Dowels (3) and Cam
Bolts (1) into corresponding holes until
Top Panel (A) and Bottom Panel (B) and
assembled unit from Figure 6 meet.
Insert 4 Bolts (8) through Bottom Panel
(B) and into Side Panels (D/E).
Tighten by rotating Cam Locks (2) and
Bolts (8) clockwise with Phillips
screwdriver.

Page | 9
Figure 9
Attach Back Panel (I) to backside of the
assembled unit from Figure 8 with
Round Head Screws (6).
Tighten Screws (6) with a Phillips
screwdriver.
Figure 10
Attach Male Slide Left (16) to Drawer
Left Panels (K) using Flat Head Screws
(4).
Attach Male Slide Right (17) to Drawer
Right Panels (L) using Flat Head
Screws (4).
Tighten Flat Head Screws (4) with
Phillips screwdriver.

Page | 10
Figure 11
Attach Drawer Back Panel (M) to
Drawer Side Panels (K/L) using Screws
(13).
Tighten Screws (13) with Phillips
screwdriver.
Insert Drawer Bottom Panel (N) into the
grooves of assembled unit.
Figure 12
Attach Drawer Front Panel (J) to
assembled unit using Screws (13).
Tighten Screws (13) with Phillips
screwdriver.
Attach Handle (7) to Drawer Front Panel
(J) using Bolt for Handle (5).
Tighten Bolt for Handle (5) with Phillips
screwdriver.
Repeat Figures 10-12 to complete the
remaining drawers.