Speco HHDO15D1G User manual

INSTRUCTION
MANUAL
1080p HD-SDI
Weather/Vandal Resistant Dome Camera
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 11/01/2012
HHDO15D1G

Contents
1
◑
Contents...................................................... 1
◑
Precautions ................................................. 2, 3
◑
Safety Instructions ...................................... 4
◑
Package Contents....................................... 5
◑
Camera Installation ..................................... 6-8
◑
Specications.............................................. 9
◑
Camera Dimension ..................................... 10
◑
Features...................................................... 11
◑
OSD Menu Details ...................................... 12- 35
◑
Trouble Shooting......................................... 36

2
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-4°F ~ +140°F. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.

3
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
This installation should be made by a qualified service person and
should conform to all local codes.
CAUTION : To prevent electric shock and risk of fire hazards:
☞Do NOT use power sources other than those specified.

4
Safety Instructions
Precautions for use
Please handle this camera carefully :
◑ This camera should be installed by qualied personnel only
◑There are no user serviceable parts inside
◑Do not disassemble this camera other than to make initial adjustments
◑Use a UL approved regulated 24 volt AC or 12 volt DC power supply
◑
Use appropriate low voltage power cable to prevent re or electrical shock
◑
Please insure that your installation area can support the weight of the camera
◑Do not use a strong or abrasive detergent when cleaning the camera
◑Do not install near cooling or heating device

5
Package Contents
Please make sure that the following items are included in the Package:
1) HHDO15D1G
• 1 Video Test Connector, Power Jack
• 1 Chameleon Cover
• 1 Wrench
• Set Screw
- 3 Tapping Screws 4x40
- 3 Plastic Anchor

6
CAMERA INSTALLATION
jvuulj{Gwv~lyGjhislG
XUG~oluG|zpunGXYG}vs{zGkjGOGG\WWGhPG
YUG~oluG|zpunGY[G}vs{zGhjGO[WG}GhP
ZUGjvuulj{G}pklvGjhislG
Tjvuulj{GiujGjhislG{vG{olGiujGqhjrUG
kjGXY}GwGz
wGpGaylk
jGaGORP
ishjraOTP
ylkORP
wGz
hjGY[}

7
CAMERA INSTALLATION
Compatibility
1) HHDO15D1G
INTWM INTPM CVCJBD DFM

8
CAMERA INSTALLATION
1. HHDO15D1G
VANDAL DOME BODY ASSEMBLY
BODY OUTER COVER
TAPPING SCREW 4X40, 3EA
VANDAL DOME BASE ASSEMBLY
PLASTIC ANCHOR 6x30, 3EA

9
MEGA PIXEL
SPECIFICATIONS
1080p HD-SDI
(Weather/Vandal Resistant Dome Camera)
DC Auto Iris Varifocal Lens 2.8-10mm
MODEL HHDO15D1G
1/3" PANASONIC 2.1Mega CMOS Sensor
2010(H) X 1092(V), 2.22M Pixels
1944(H) X 1092(V), 2.12M Pixels
1920 X 1080P (1080P / 30fps)
Progressive Scan
COLOR : 0.5 Lux @ F1.2 , 0.01 Lux(Sens-UP X60)
BW : 0.3 Lux @ F1.2 , 0.001 Lux(Sens-UP X60)
HD-SDI, CVBS
1080P / 720P
More than 50dB (AGC off)
f = 2.8mm ~ 10mm
2 Mega DC Auto Iris
OFF/LOW/MIDDLE/HIGH
AUTO,1/25~ 1/50.000 sec, x2~x30
OFF/Auto x2 ~ x30
1 ~ 100 Level Adjustable
ON/OFF
OFF/BLC/HSBLC
OFF/ON
COLOR/BW/AUTO/EXT
ATW/AWC->SET/INDOOR/OUTDOOR/MANUAL
OFF/LOW/MIDDLE/HIGH
X64 (PIP)
OFF/LOW/MIDDLE/HIGH
OFF/8 Zone
3 Zone On/Off/Sensitivity/Area setting
Dual POWER(DC12V/AC24V)
DC : 250mA ±10%
AC : 120mA ±10%
-4°F~140°F(Humidity : 20%RH ~ 95%RH)
-4°F~140°F(Humidity : 20%RH ~ 80%RH)
5.1" (Dia) * 3.46" (H)
1 Ibs
HHDO15D1G (2.8-10mm)
■
Sensor Type
Total Pixels
Active Pixels
Focal Length
Drive Type
AGC
Shutter Speed
Digital Slow Shutter(Sens-UP)
Sharpness
BLC/HSBLC
LSC
Day&Night
White Balance
DNR
D-ZOOM
ACCE
Privacy
Motion Detection
Image Sensor
Resolution
Scanning System
Min. Illumination
Video Output
HD Format
S/N Ratio
Lens
Function
Power Source
Power Consumption
Storage Temperature
Operating Temperature
Dimension(WxHxD)
Weight
Level
Resoution

10
CAMERA DIMENSION
1) HHDO15D1G
1.16”
5.10” dia
5.10” dia
3.93” dia
3.46”

11
General Features
DNR(Digital Noise Reduction)
SPECO DNR technology utilizes both an adaptive 2D filter reducing noise in the brightness of the
image and an adaptive 3D filter reducing noise caused by movement. The result is that HD-SDI
camera supports Motion Adaptive DNR function that removes noise and greatly reduce motion blur.
HD(High Definition) Surveillance
HD-SDI Camera provides the superb surveillance conditions than normal VGA camera.
ACCE(Adaptive Color & Contrast Enhanment)
HD-SDI Image Enhancer source of the software can be activated. HD-SDI Image Enhancer improves the
clarity of images taken in poor conditions such as fog, smoke, rain or snow. Applied to live or recorded color
video, it delivers real-time results and displays visual details that would otherwise have been difficult to see.
HLC(High Light Compensation)
High Light Compensation function is especially effective for reading car number plates at night time. Users
can select and define the required observation area for the target object and ignore strong highlight areas.
Illumination
With an Incredibly Minimum Illumination of Amazing 0.001Lux can Capture Good Images Even in Extremely Low
Light Conditions and Related Noises are Significantly Reduced by the Ultra Advanced DNR(Digital Noise
Reduction) Technology.
Privacy Zone
A "Privacy zone" can be set if you desire to block viewing of specific areas in the picture.
Additional Functions
OSD - On Screen Display menu
Privacy Masking - 8 zones, Sens-Up - x60 times, Digital Zoom - x64
☞
☞
☞
☞
☞
☞
☞
DNR
Digital
Reduction
Noise
0.017 Lux
Illumination
Minimum
High Definition
HD
Contrast Enhanment
Adaptive Color
ACCE
DSP
3D-DNR
OSD
Privacy Zone
HLC
DNR
Digital
Reduction
Noise
0.017 Lux
Illumination
Minimum
High Definition
HD
Contrast Enhanment
Adaptive Color
ACCE
DSP
3D-DNR
OSD
Privacy Zone
HLC
DNR
Digital
Reduction
Noise
0.017 Lux
Illumination
Minimum
High Definition
HD
Contrast Enhanment
Adaptive Color
ACCE
DSP
3D-DNR
OSD
Privacy Zone
HLC
DNR
Digital
Reduction
Noise
0.001 Lux
Illumination
Minimum
High Definition
HD
Contrast Enhanment
Adaptive Color
ACCE
DSP
3D-DNR
OSD
Privacy Zone
HLC
DNR
Digital
Reduction
Noise
0.017 Lux
Illumination
Minimum
High Definition
HD
Contrast Enhanment
Adaptive Color
ACCE
DSP
3D-DNR
OSD
Privacy Zone
HLC
DNR
Digital
Reduction
Noise
0.017 Lux
Illumination
Minimum
High Definition
HD
Contrast Enhanment
Adaptive Color
ACCE
DSP
3D-DNR
OSD
Privacy Zone
HLC
3D-DNR
Digital
Reduction
Noise
0.00001 Lux
Illumination
Minimum
Resolution
Horizontal
600
Wide Dynamic Range
Digital
WDR
Backlight
Compensation
BLC
DSP
3D-DNR
OSD
Smart-IR

12
●
Setup Menu
How to Set Up the camera menu
΄Ͷ΅Ά΁;ͶͿΆ ͵ͶͷͲΆͽ΅΄Ͷ΅
·ͺ͵Ͷ΀
;ͲͿΆͲͽ
΀ͷͷ
ͽ΀Έ
;ͺ͵͵ͽͶ

΀ͷͷ
ͳ΃ͺ͸͹΅ͿͶ΄΄

ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
΀ͷͷ
ͽ΀Έ
;ͺ͵͵ͽͶ
͹ͺ͸͹
΀ͷͷ
ͽ΀Έ
;ͺ͵͵ͽͶ
͹ͺ͸͹
΀ͷͷ
͵ͶͷͲΆͽ΅
΄ͶͽͶʹ΅ Ͳ΃ͶͲίͲ΃ͶͲ
΁΀΄ͺ΅ͺ΀Ϳ
΄ͺ΋Ͷ
΃Ͷ΅Ͳ͸ͲͺͿ
΀ͷͷ
ͽͶ·Ͷͽ
ͳͽͲʹͼ;Ͳ΄ͼ
͵ͶͷͲΆͽ΅
΃Ͷ΅
ͶͿ͵
Ͳ΅Έ
ͲΈʹ΄Ͷ΅
ʹ΀ͽ΀΃
ͳΆ΃΄΅΀Ϳ΀ͷͷ
ͽͶ·ͶͽίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
΁΀΄ͺ΅ͺ΀Ϳ
΄ͺ΋Ͷ
΃Ͷ΅Ͳ͸ͲͺͿ
΀ͷͷ
ͺ΃ͽͶ͵
ͺ΃΁Έ;
͵ͶͽͲΊ
͵ͶͽͲΊ
͵ͿͲ͸ʹ
Ϳ͵Ͳ͸ʹ
ͽͶͿ΄
ͺͿ͵΀΀΃
΀Ά΅͵΀΀΃
Ͳ͸ʹ
΄ͶͿ΄ͶΆ΁
͸ͲͺͿ
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
Ͳ΃ͶͲ
΃Ͷ΅Ά΃Ϳ
Έ͹ͺ΅ͶͳͲͽ
͵ͲΊͿͺ͸͹΅
ͳͽʹ
;΀͵Ͷ
΃Ͷ΅Ά΃Ϳ
ͲΆ΅΀
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
;ͲͿΆͲͽ
΃Ͷ΅Ά΃Ϳ
ͳΈ
;ͶͿΆ
ͲΆ΅΀ͷͽͼ
ΩΩΩΩΩΩΩΩΩΩ
͵ͺ΄΁ͽͲΊ
͹΄ͳͽʹ
΀Ϳ
΄ͶͿ΄ͶΆ΁ΩίΩͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
͵Ͷͷ΀͸
ͳͽʹ
ͶΉ΅΃Ͷ΅Ά΃Ϳ
΄͹Ά΅΅Ͷ΃
ͶΉ΁΀΄Ά΃Ͷ
Ϳ΅΄ʹͲΆ΅΀ͷͽͼΩΩΩΩΩΩΩΩ 
΁ͲͽͲΆ΅΀ͷͽͼΩΩΩΩΩΩΩΩ
ͳͽΆͶίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ͶͿ͵
΃Ͷ΅
ͲΆ΅΀
ͲʹʹͶ
͵ʹ
΃Ͷ΅Ά΃Ϳ ΃Ͷ΅
ͶͿ͵
΀Ϳ΀ͷͷ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
΃Ͷ΅
ͶͿ͵
΃Ͷ΅
ͶͿ͵
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
΃Ͷ΅
ͶͿ͵
΃Ͷ΅
ͶͿ͵
΃Ͷ͵ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
Ͳ΃ͶͲͺ΃΄;Ͳ΃΅
͹ͺ͸͹
;ͺ͵͵ͽͶ
΀Ϳ΀ͷͷ
Ϳͺ͸͹΅
Ͳͽͽ͵ͲΊ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ͶͿ͵
΃Ͷ΅
΀Ϳ
ͽ΀Έ
΃Ͷ΅
ͶͿ͵
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
Ͳ͸ͲͺͿ
΄ͺ΋Ͷ
΁΀΄ͺ΅ͺ΀Ϳ

13
͵Ϳ΃ ΀Ϳ΀ͷͷ
΄ͽͶ·Ͷͽ
ͶͽͶ·Ͷͽ
ͽͶ·Ͷͽ

ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
΄;Ͳ΃΅Ϳ΃ ΀Ϳ΀ͷͷ
΃Ͷ΅
ͶͿ͵
΀Ϳ 
΀ͷͷ
ͷ΃ͶͶ΋Ͷ ΀Ϳ΀ͷͷ
;ͺ΃΃΀΃
·ͷͽͺ΁
΃΀΅Ͳ΅Ͷ
΀ͷͷ
΁ͺ΁΀Ϳ΀ͷͷ
͵΋΀΀; ΩίΩͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
΁ͲͿ΅ͺͽ΅ ΁ͺ΁͵΋΀΀;
͵ͶͷͲΆͽ΅
΃Ͷ΅
ͶͿ͵
ͿͶ͸ͺ;Ͳ͸Ͷ
Ͳ΃ͶͲ΄ͶͽͶʹ΅
΁΀΄ͺ΅ͺ΀Ϳ
΄ͺ΋Ͷ
΃Ͷ΅Ͳ͸ͲͺͿ
΄ͶͿ΄ͺ΅ͺ·ͺ΅Ί
;΀΅ͺ΀Ϳ·ͺͶΈ
͵ͶͷͲΆͽ΅
΀ͷͷ
Ͳ΃ͶͲ΄ͶͽͶʹ΅Ͳ΃ͶͲίͲ΃ͶͲ
΁΀΄ͺ΅ͺ΀Ϳ
΄ͺ΋Ͷ
΃Ͷ΅Ͳ͸ͲͺͿ
ʹ΀ͽ΀΃
͵ͶͷͲΆͽ΅
΀ͷͷ
ͽͺ·Ͷ͵΁ʹ
ͽͶ·Ͷͽ
΄΅Ͳ΅ͺʹ͵΁ʹ
΄΅Ͳ΃΅
ͽͶ·Ͷͽ
΄ͶͿ΄Ά΁
΄͹Ͳ΃΁ͿͶ΄΄
ͽͶ·Ͷͽ
΃Ͷ΄΀ͽΆ΅ͺ΀Ϳ
͸Ͳ;;ͲͲΆ΅΀Ά΄Ͷ΃Ά΄Ͷ΃ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ͳͽΆͶ͸ͲͺͿ
΃Ͷ͵͸ͲͺͿ
ͳͽͲʹͼͽͶ·Ͷͽ
ͳͽΆͶ͸ͲͺͿ
΃Ͷ͵͸ͲͺͿ
Ͳ΃ͶͲίͲ΃ͶͲ
ͶͿ͵
΃Ͷ΅
΀Ϳ΀ͷͷ
΀Ϳ΀ͷͷ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
Ͳ͸ͲͺͿ
΄ͺ΋Ͷ
΁΀΄ͺ΅ͺ΀Ϳ
΀ͷͷ
ί΄ΖΝΖΔΥΒΓΝΖ
΀ͷͷ
ͶͿ͵
΃Ͷ΅
΀Ϳ΀ͷͷ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ͲΆ΅΀΀Ϳ΀ͷͷ
ͶͿ͵
ͶͿ͵
΃Ͷ΅
ΩίΩͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
΀Ϳ΀ͷͷ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
΃Ͷ΅
ͶͿ͵
΃Ͷ΅
ͶͿ͵
΃Ͷ΅Ά΃Ϳ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ͶͿ͵
΃Ͷ΅
΀Ϳ΀ͷͷ
΃Ͷ΅
΃Ͷ΅
ͶͿ͵
͵Ϳ΃
΃Ͷ΅Ά΃Ϳ
΀Ϳ
΃Ͷ΅Ά΃Ϳ
΀ͷͷ
;΀Ϳͺ΅΀΃
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ͽʹ͵
ʹ΃΅
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
΀Ϳ
΃Ͷ΅Ά΃Ϳ
͵ͺ΄΁ͽͲΊ΀Ϳ
͵ͶͷͶʹ΅
΄΁ͶʹͺͲͽ
Ͳ͵ͻΆ΄΅
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
;΀΅ͺ΀Ϳ
΁΃ͺ·ͲʹΊ
΃Ͷ΅Ά΃Ϳ
΄͹Ͳ΃΁ͿͶ΄΄
΃Ͷ΅Ά΃Ϳ
ʹͲ;΅ͺ΅ͽͶ
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
΃Ͷ΅Ά΃Ϳ
;ͺ΃΃΀΃
Ͳ΃ͶͲ͵ͺ΄΁ͽͲΊ
͵΋΀΀;
΀Ϳ
Ͳ΃ͶͲ͵ͺ΄΁ͽͲΊ
΀Ϳ
΀Ϳ
΃Ͷ΅
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
͵ͶͷͷͶʹ΅
Ϳ΃ ͶͿ͵

14
΅ͶΉ΅ʹ΀ͽ΀΃
΀Ά΅ͽͺͿͶ
ͽ΄ʹ
΃Ͷ΄΀ͽΆ΅ͺ΀Ϳ
ͷͲʹ΅΀΃Ί
ͶΉͺ΅
΃Ͷ΄Ͷ΅
΃Ͷ΅
ͶͿ͵
΃Ͷ΅Ά΃Ϳ
Ϳ΅΄ʹ΁Ͳͽ
΀Ϳ΀ͷͷ
Ϳ΅΄ʹ
΁Ͳͽ
΃Ͷ΅
ͶͿ͵
΃Ͷ΅
΀Ϳ΀ͷͷ
ίͽΖΧΖΝ΄ΖΝΖΔΥΒΓΝΖ
΁΁
΃Ͷ΄Ͷ΅ ΃Ͷ΅Ά΃Ϳ
΀΄͵
Ͳ͵ͻΆ΄΅
΃Ͷ΅Ά΃Ϳ ͶͿ͵

15
Menu items can be selected by using the OSD buttons of the camera
1. Press the Set Up button.
* The Set Up menu will be displayed on the monitor.
2. Move and select the required function using the Up and Down button.
* Move the arrow indicator Up or Down to select the desired feature by pressing
the Up or Down button.
Menu Set Up
SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.NR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATW
COLOR
SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.NR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATW
COLOR

16
3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting, move the arrow indicator to EXIT and press the
SET button to EXIT.
1. Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen.
2. Select the desired lens type by pressing the Left or Right button.
NOTE
* Move to the available submenu by moving arrow to desired feature.
* Submenu is not available when this symbol is displayed
Lens
DC: DC Auto Iris Lens
SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.NR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATW
COLOR
3. Press the RETURN to return to the SETUP menu.

17
This function is used to select Automatic or Manual shutter speed control.
1. On the Set Up menu screen select EXPOSURE by using the Up or Down button.
2. Select the desired shutter mode by pressing the Left or Right button.
* FLK : Select FLK mode when flickering occurs; caused by the unmatched frequency of electric lights.
Exposure
SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.DAY / NIGHT
5.NR
6.SPECIAL
7.ADJUST
8.RESET
9.EXIT
DC
ATW
COLOR
EXPOSURE
SHUTTER
AGC
SENS-UP
BRIGHTNESS
ACCE
DEFOG
BLACKLIGHT
RETURN
AUTO
HIGH
AUTO
OFF
OFF
OFF
RET
NOTE
*Shutter: Select Shutter using the Up or Down button, you can adjust the shutter speed
from AUTO,1/30,1/60, FLK, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000,1/50000, x2, x4, x6,
x8, x10, x15, x20, x30, x60
→FLK: Select FLK mode if flickering occurs; caused by the unmatched frequency of electric
light. If select FLK mode, sense-up does not operate.
*Low Shutter Control: sensitivity boost up by frame accumulation for extremely low
illumination conditionspeed
100

18
SENS-UP
SENS-UP
RETURN
x 10
* AGC(AUTO GAIN CONTROL):
A higher gain increases brightness but also increases any noise.
OFF : Deactivate the AGC function
LOW : Set automatic gain control to LOW.
MIDDLE : Set utomatic gain control to MIDDLE.
HIGH : Set automatic gain control to HIGH
* SENS - UP:
At night and/or in dark conditions, the Sens-Up mode can be selected to desired value from x2 ~ x60
* When DC is selected, the brightness can be adjusted. The brightness control range is 1 ~ 100.
LENS
BRIGHTNESS 100

19
* RETURN:
Select Return to save the changes in the EXPOSURE menu and return to the SETUP menu.
NOTE
* Pressing the SET button in AUTO mode allows adjustment of image brightness
by increasing or decreasing the shutter speed (x2 ~x60).
* The higher the level, the brighter the image becomes, but it is possible that an
after image (ghosting) could appear.
* When SENS-UP is activated the increased magnification can induce noise and
pixelation; this is quite normal.
* HSBLC: HSBLC function is especially effective for reading car number plates at the night time.
You can select and define the required observation area for the target object and ignore a strong light area.
Press the "ENTER" button at the AREA menu, you can change the position as shown in Picture 1.
Press the "ENTER" button again after area setting, you can change the position as shown in Picture 2.
Default: Press the Default to return to factory defaults.
PICTURE 1 PICTURE 2
POSITION SIZE
HSBLC
SELECT
DISPLAY
LEVEL
MODE
BLACK
AEFAOLT
RETURN
AREA1
ON
100
ALL DAY
MASK ON