Spirit Johnny G User manual

Download and install Zwift app on IOS or
Android devices or Windows PC.
Create an account as directed by app or
Login to your prole.
Program screen appears. Select RIDE. Ride begins with bike data in upper corner
left of screen.
Increasing WATTS output increases your
ride speed. Increasing the bike's resistance
level and cadence will increase watts.
Tap and pair HEART RATE and
CADENCE, the same as Power Source.
CONTROLLABLE can be paired if
wanting Zwift to control bike. Resistance
changes as grade of course changes.
Press LET’S GO.
Allow Zwift app to access the Johnny G
bike's Bluetooth.
Select RIDE and tap POWER SOURCE
to pair.
Select appropriate Bluetooth signal.
NOTE: If in a facility with multiple bikes,
assign Bike ID or ANT+ number to each bike
as described in the Johnny G Owner’s Manual
and label each bike with the bike ID number.
www.johnnygspiritbike.com Revised 09.24.2020
JOHNNY G SPIRIT BIKE
ZWIFT®CONNECTION GUIDE

www.johnnygspiritbike.com Revised 09.24.2020
JOHNNY G SPIRIT BIKE
ZWIFT®CONNECTION TROUBLESHOOTING
If having difculty connecting your Johnny G Spirit Bike to the Zwift app, follow the steps below to clear
and establish a Bluetooth connection.
• If Bluetooth not connecting, check to see if the bike BT is connected to another device (tablet or
phone, watch, etc.). Use option to Forget This Device to end a connection.
• Turn off then turn on BT switch in the settings menu of IOS and Android device.
• Reset the bike console (press and hold the PLAY and + keys simultaneously for 3 seconds), bike
displays CONSOLE RESET.
• When the console resets, all the connections are reset…just like when you restart your computer.
• If Power, Cadence, HR or Controllable do not automatically pair, tap on the screen for each to open
a pop-up to select which BT connection to use.