SportDOG Hunter Protector Pack User manual

Attaching the Hunter Protector Pack to the Sportdog TEK 2.0 Collar
Step 1: Undo the velcro straps & unscrew the Hunter Protector Pack
Step 2: Cut off the rubber antenna guide on the collar (We recommend using electrical tape to secure the antenna to
the collar strap if you wish to use the collar without the Hunter Protector Pack)
Step 3: Remove the contact probes (if you have the Track and Train model)
Step 4: Insert the SportDOG Tek 2.0 collar into one side of the Hunter Protector Pack

Step 5: Close case & Tighten all screws
Step 6: Attach Foam sticker on to the internal plate on the collar (for locate only collar)
Step 7: Fasten the Velcro
Step 8: Screw the contact probes back in (if you have the Track and Train model)