SportsArt Fitness T650 Operating instructions

T650/T650M Treadmill Repair Manual
SPORTS ART INDUSTRIAL CO., LTD.

【Table of Contents】
1. Main Component Placement
1-01. T650/T650M Treadmill Complete
1-02. DisplayArea
1-03. Hood Area
1-04. DisplayArea Keys
1-05. Display Inside
1-06. Drive Board
1-07. AC Servo Motor
1-08. Other (1): LCD, Keys, Fan Board, Telemetry Board
1-09. Other (2): HTR Board, Key Board, AV Board, EMI Filter
2. Introduction
2-01. Specifications
2-02. Display Features
2-03. TFT Screen
2-04. Display Indicators
2-05. DisplayArea Keys
2-06. Display Circuit Boards
3. Operation
3-01-01.Operation
4. Cable Connections
4-01-01. Display Board Cable Connections
4-01-02. DisplayArea Board Cable Connections
4-02-01. Drive Board Cable Connections
4-02-02. Drive Board Cable Connection Block Diagram
4-03-01.AC Incline Operation - Time
4-03-02.AC Incline Operation - Voltage
4-04-01. Fan Operation
5. Error Messages
5-01. Error Code Overview
5-02. E-1-1 – Encoder Error
5-03. E-1-2 – Motor Overheat Error
5-04. E-1-3 – Motor Speed Error
5-05. E-2-1 – IGBT Excessive Current Error
5-06. E-2-2 – IGBT Excessive Heat Error
5-07. E-3-1 – Incline Calibration Error
5-08. E-4-2 , E-4-3 Low/High Voltage Errors
5-09. E-8-1 – No Display-Drive Board Communication at Start
5-10. E-8-2 – No Display-Drive Board Communication During
Operation
6. Troubleshooting
6-01. Motor Does Not Operate
6-02. Display Soft Key Malfunction
6-03. Unit Will Not Start Up
6-04. Incline Motor Does Not Operate
6-05. The Fuse Blew
6-06. Telemetry Heart Rate
6-07. HTR Heart Rate Malfunction
6-08. Safety Key Does Not Operate
6-09. Fan Malfunction
7. Testing
7-01. EMI Filter
7-02. Motor
7-03. Inductor
7-04. Incline Motor Voltage
7-05. Incline Calibration Switch
7-06. Safety Key Switch
7-07. Telemetry Reception
7-08. Heart Touch Rate (HTR) Board
7-09. HTR Handlebar
7-10. Motor Thermal Sensor
7-11. Fan Board Voltage
7-12. Power Supply at the Drive Board
7-13. Display Board Voltage

【Table of Contents】
8. Mechanical Adjustments and Part Replacement
8-1. T650(M) Treadmill Walk Belt Tightness Adjustment
8-2. T650(M) Treadmill Walk Belt Alignment
8-3.AC Motor Incline Calibration Procedure - Software
8-4.AC Motor Incline Calibration Procedure - Hardware

1.Product Picture
1-01-01

2. T650 /T650M Components－Display Area
Speed key
Sin
g
al
Setting number Keys
Incline key
Stop key
Feedback Screen
QuickStart key
PROGRAM Keys
Heart Rate
id
1-01-02

3. T650/T650M Components－Motor Area
EMI Filter Incline Set
Incline -3% Switch
Incline 0% Switch
AC SERVO Motor
Drive Board
1-01-03

4. T650/T650M Display
Chan
g
e Dis
p
la
y
ke
y
ÎProgram mode keys
Q
UICK START
,
START
,
ENTER ke
y
s
Number and CLEAR keys
1-01-04

5. T650/T650M Components – Display Area－Display Board
1-01-05

6. T650/T650M Components – Drive Board
1-01-06

7.T650/T650M Components – AC Servo Motor
Encoder
1-01-07

8. T650/T650M Components －Other（1）
Part EMI Filter (220V) Part EMI Filter (110V)
Part BRIDGE Board Part Telemetry Receiver Board
1-01-08

9. T650/T650M Components －Other（2）
Part HTR Board Part Soft key
Part SAFETYKEYBoard Part Encoder
1-01-09

T650/T650M Specifications
Specification Deta Notesils
Pow Exteer Supply rior Power Supply 110V (USA);
220V (Europe)
Main HRC
a
Window Display Rheart rate window: 65%, 80%, Heart
te, Calories, Speed, Time, Distance,
Cal/hr, Mets, Pace, Incline
Sec Dotondary Window
Display Matrix 15 X 8 Window
T65 0.2 -
0.1
0(M) 20.0KPH
– 12.0MPH
Spe T65
Rev 0. 0.1-
ed Range 0M
erse mode 2-5KPH 3MPH
Incli T65
T65 AC Prog
ne Range 0 :0 % TO 15 %
0M:-3% TO 15% Motor ram/Control
Hea HTR
Wir
rt Rate Detection Heart Touch Rate (contact pads)
e less Telemetry Heart Rate (HR
Transmitter)
KPH Prog /MPH Setting ram
Ope Man
,WT
ration ual,Hill,Random,Interval,Track,FITTEST
Loss,Zone Trainer,FAT BURN,Glute ,
2-1-1

T650/T650M Display
2-01-02

T650/T650M Introductions－Display Board (Heart Rate Indicator)
Heart Rate Indicator
ENTER Ke
y
and Indicato
r
Workout Programs
ÎLit indicates active program:
MANUAL,HILL,RANDOM,INTV,TRACK,GLUTE
,FAT BURN,ZONE TRAINER,WtLOSS/CARDIO 模
式
Display Lock/Unlock
Key and Indicator
ÎLit indicates the
active row and
scan/lock mode.
Number Key and Indicator
2-01-03

T650/T650M Introduction－Display Board (Keys)
Chan
g
e Dis
p
la
y
ke
y
ÎProgram mode keys
Q
UICK START
,
START
,
ENTER ke
y
s
Number and CLEAR keys
2-01-04

T650/T650M Operation
1. Start Up
Function: Press the Quick Start key to start operating the unit.
Operation: (1) The display shows “SPORTSART – T650”.After two seconds, “SELECT PROGRAM OR
QUICKSTART” scrolls across the display.Press the QUICK START key to start operating or press
the PROGRAM key to operate an exercise program.
(2) The PROGRAM LED flashes After pressing a program key, the associated program indicator
lights up. The setting window shows two seconds. If you press the <RANDOM> key,
the RANDOM LED lights. “RANDOM” appears.
(3) User age and weight setting When “AGE – 35”appears, press the numerical keys or
INCLINE▲/▼. Then press the <ENTER> key to confirm your setting.
When “WEIGHT -- 75 KG” appears, press the numerical keys or INCLINE▲/▼.
Then press the <ENTER> key to confirm your setting.
(4) After entering such information, you can start operating the treadmill.
2.SPEED Key
Function: Set speed function
Operation: (1) Press the SPEED <▲> key. Values in the speed window increase. Speed increases.
(2) Press the SPEED <▼> key. Values in the speed window decrease. Speed decreases.
(3) SPEED range: 0.2~20 KPH (0.1~12 MPH).
3-1-1

3.INCLINE Key Function
Function: Set treadmill incline position.
Operation: (1) Press the INCLINE<▲> key. Values in the incline window increase.
Incline operates up.
(2) Press the INCLINE<▼> key. Values in the incline window decrease.
Incline operates down.
(3) INCLINE range: 0~15％; increments of 0﹒5％.
4.STOP Key Function
Function: Leave an exercise program.
Operation: (1) In QUICKSTART mode, press the＜STOP＞key to leave the exercise program.
(2) If in the START mode, having entered user information, press the＜STOP＞key to
stop exercising. Feedback pauses as is.
(3) In any mode, hold the＜STOP＞key three seconds to leave the present mode
and return to start up screen.
5.CHANGE Key Function
Function: Change the display feedback row.
Operation: (1) Press the <Change Display> key while exercising to toggle from one
feedback row to another feedback row. Corresponding LEDs light. Top row:
CALORIES、SPEED、TIME、DISTANCE. Bottom row: CAL/HR、METS、PACE、INCLINE.
(2) In SCAN mode, the SCAN LED lights. Every four seconds, the display toggles
from one feedback row to the other row. If you press the SCAN key again, the
scan
LED extinguishes. The display continues to show the activated feedback row.
3-1-2

6.CLEAR Key
Function: Clear entered values to 0.
Operation: Press to clear entered values to 0.
7.PROGRAM Key
Function: Select exercise programs.
Operation: (1) Press any PROGRAM key. Its corresponding LED lights.
(2) Programs include MANUAL、HILL、RANDOM、INTV、TRACK、FAT TEST、Wt LOSS、ZONE
TRAINER、FAT BURN、GLUTE
8.T650M Reverse Mode
Function: Enter reverse mode.
Operation: (1) Activate the treadmill through START mode, entering user age and weight.
(2) Once the treadmill is operating, press the MANUAL-REVERSE key.
REVERSE or MANUAL appears. Press up or down keys to toggle
between the two modes. Press the ENTER key to confirm your choice.
(3) Reverse mode cannot be accessed through QUICK START mode.
(4) Forward speed range: MPH: 0.1~12 MPH; KPH: 0.2~20 KPH.
Reverse speed range: MPH: 0.1~--3 MPH; KPH: 0.2~-0.5 KPH.
3-1-3

9. Basic Settings
Function: (1) Set KPH/MPH, total distance, and total time.
Operation: (1) Hold the <Change Display> key for three seconds to enter the basic setting mode.
Message
window shows the current setting as either “UNIT - MPH” or “UNIT - KPH”.
Press the INCLINE＜▲/▼＞key to change your setting.
(2) Press the <ENTER> key to see the total distance:
“DIST-XXXXX KM”.
(3) Press the <ENTER> key to see the total time:
“TIME-XXXXX HOUR”.
(4) Press the <ENTER> key to see the display main program IC version, for example,
“CTLT650_1X”.
(4) Press the <ENTER> key to see the drive board main program IC version, for example,
“DRV T650_X”. Press the <ENTER> key to return to the startup screen. Or press the
<STOP> key to exit the basic setting mode.
3-1-4