Stahl EXLUX 6009/5 Series User manual

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Operating instructions
Additional languages r-stahl.com
EN
Emergency luminaire for
fluorescent lamps
Series EXLUX 6009/5

2
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
Contents
1 General Information ............................................................................................3
1.1 Manufacturer .......................................................................................................3
1.2 Information regarding the operating instructions .................................................3
1.3 Further documents ..............................................................................................3
1.4 Conformity with standards and regulations .........................................................3
2 Explanation of the symbols .................................................................................4
2.1 Symbols in these operating instructions .............................................................4
2.2 Warning notes .....................................................................................................4
2.3 Symbols on the device ........................................................................................5
3 Safety notes ........................................................................................................5
3.1 Operating instructions storage ............................................................................5
3.2 Safe use ..............................................................................................................5
3.3 Intended Use .......................................................................................................6
3.4 Modifications and alterations ..............................................................................6
4 Function and device design ................................................................................6
4.1 Function ..............................................................................................................6
4.2 Device design .....................................................................................................7
5 Technical data .....................................................................................................8
6 Engineering .......................................................................................................12
6.1 Mains operation ................................................................................................12
6.2 Emergency light blocking ..................................................................................13
7 Transport and storage .......................................................................................15
7.1 General .............................................................................................................15
7.2 Batteries ............................................................................................................15
8 Mounting and installation ..................................................................................15
8.1 Dimensions / fastening dimensions ..................................................................16
8.2 Mounting / dismounting, operating position ......................................................18
8.3 Installation .........................................................................................................22
9 Commissioning .................................................................................................27
10 Operation ..........................................................................................................28
10.1 Operating Modes ..............................................................................................28
10.2 Functional and rated operating time test ...........................................................29
10.3 Indications .........................................................................................................30
10.4 Troubleshooting ................................................................................................31
11 Maintenance, Overhaul, Repair ........................................................................32
11.1 Maintenance .....................................................................................................32
11.2 Repair ...............................................................................................................37
11.3 Returning the device .........................................................................................37
12 Cleaning ............................................................................................................38
13 Disposal ............................................................................................................38
14 Accessories and Spare parts ...........................................................................38

226311 / 600960300010
2020-04-17·BA00·III·en·04
General Information
3
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
1 General Information
1.1 Manufacturer
1.2 Information regarding the operating instructions
ID-No.: 226311 / 600960300010
Publication Code: 2020-04-17·BA00·III·en·04
The original instructions are the English edition.
They are legally binding in all legal affairs.
1.3 Further documents
• Data sheet
For documents in additional languages, see r-stahl.com.
1.4 Conformity with standards and regulations
See certificates and EU Declaration of Conformity: r-stahl.com.
The device has IECEx approval. For certificate please refer to the IECEx homepage:
http://iecex.iec.ch/
Further national certificates can be downloaded via the following link:
https://r-stahl.com/en/global/support/downloads/.
R. STAHL Schaltgeräte GmbH
Business Unit Lighting & Signalling
Nordstr. 10
99427 Weimar
Germany
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30
74638 Waldenburg
Germany
Phone:
Fax:
Internet:
E-mail:
[phone]
[phone]
r-stahl.com
[email protected]
Phone:
Fax:
Internet:
E-mail:
[phone]
[phone]
r-stahl.com
[email protected]

Explanation of the symbols
4226311 / 600960300010
2020-04-17·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
2 Explanation of the symbols
2.1 Symbols in these operating instructions
2.2 Warning notes
Warnings must be observed under all circumstances, in order to minimize the risk due to
construction and operation. The warning notes have the following structure:
• Signalling word: DANGER, WARNING, CAUTION, NOTICE
• Type and source of danger/damage
• Consequences of danger
• Taking countermeasures to avoid the danger or damage
Symbol Meaning
Tips and recommendations on the use of the device
Danger due to explosive atmosphere
Danger due to live components
DANGER
Danger to persons
Non-compliance with the instruction results in severe or fatal injuries to
persons.
WARNING
Danger to persons
Non-compliance with the instruction can result in severe or fatal injuries to
persons.
CAUTION
Danger to persons
Non-compliance with the instruction can result in light injuries to persons.
NOTICE
Avoiding material damage
Non-compliance with the instruction can result in material damage to the device and / or
its environment.

226311 / 600960300010
2020-04-17·BA00·III·en·04
Safety notes
5
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
2.3 Symbols on the device
3 Safety notes
3.1 Operating instructions storage
• Read the operating instructions carefully.
• Store the operating instructions at the mounting location of the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
3.2 Safe use
Before mounting
• Read and observe the safety notes in these operating instructions!
• Ensure that the contents of these operating instructions are fully understood by the
personnel in charge.
• Use the device in accordance with its intended and approved purpose only.
• Always consult R. STAHL Schaltgeräte GmbH if using the device under operating
conditions which are not covered by the technical data.
• We cannot be held liable for damage to the device caused by incorrect or unauthorised
use or non-compliance with these operating instructions.
For assembly and installation
• Observe national assembly and installation regulations (e.g. IEC/EN 60079-14).
• Observe national safety and accident prevention regulations.
• During installation and operation, observe the information (characteristic values and
rated operating conditions) on the type plates and data plates and information signs
located on the device.
• Before installation, make sure that the device is not damaged.
Maintenance, repair, commissioning
• Before commissioning, make sure that the device is not damaged.
• Work on the device, such as installation, maintenance, overhaul, repair, may only be
carried out by appropriately authorised and trained personnel.
• Perform only maintenance work or repair described in these operating instructions.
Symbol Meaning
05594E00
CE marking according to the currently applicable directive.
02198E00
According to marking, device approved for hazardous areas.

Function and device design
6226311 / 600960300010
2020-04-17·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
3.3 Intended Use
The luminaire 6009/5 is equipment
• for lighting areas, work spaces and objects
• for emergency lighting in case of power failure.
• can be used indoors and outdoors
• for stationary mounting
• for use in Zones 1, 21, 2, 22 and in the safe area
3.4 Modifications and alterations
4 Function and device design
4.1 Function
Application range
The luminaire 6009/5 is used as equipment for lighting areas, work equipment and
objects.
It can be used indoors or outdoors and is suitable for emergency lighting in case of
power failure.
The luminaire is approved for use in hazardous areas of Zones 1, 21, 2 and 22.
Mode of operation
A weekly functional test has been permanently integrated. An annual rated operating time
test can be deactivated and activated.
When opened using a central lock, the light fitting switches off automatically
(standard version).
DANGER
Explosion hazard due to modifications and alterations to the device!
Non-compliance results in severe or fatal injuries.
• Do not modify or alter the device.
No liability or warranty for damage resulting from modifications and
alterations.
DANGER
Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.
• Use the device only in accordance with the operating conditions
described in these operating instructions.
• Use the device only for the intended purpose specified in these
operating instructions.

226311 / 600960300010
2020-04-17·BA00·III·en·04
Function and device design
7
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
4.2 Device design
16385E00
1 Lamp holder 6 Light fitting enclosure
2 Control gear 7 Reflector plate
3 Translucent cover 8 Battery
4 Cable entry 9 Battery enclosure
5 Connection terminal
123
4567
8
9

Technical data
8226311 / 600960300010
2020-04-17·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
5 Technical data
Explosion Protection
Global (IECEx)
Gas and dust IECEx PTB 13.0059
Ex db eb mb IIC T4 Gb
Ex tb IIIC T80 °C Db
Europe (ATEX)
Gas and dust PTB 13 ATEX 2015
E II 2 G Ex db eb mb IIC T4 Gb
E II 2 D Ex tb IIIC T80 °C Db
Certifications and certificates
Certificates IECEx, ATEX, Brazil (ULB), EAC (TS-RU)
Ship approval DNV GL, BVIS
Technical Data
Electrical data
Rated operational
voltage
Rated insulation
voltage
320 V
Rated operational
current
Inrush current Ipeak = 52 A; Δt = 130 ms
Maximum number of luminaires per miniature circuit breaker 1):
1) Typical value for 1-pole miniature circuit breaker at +25 °C and
nominal voltage 230 V AC; the exact number depends on the miniature circuit
breaker used
Standard: 220 to 240 V ±10%, 50 / 60 Hz
(luminaires in accordance with IEC 60081)
Optional: 110 to 127 V ±10%, 50 / 60 Hz
(luminaires in accordance with IEC 60081)
120 V ±10%, 50 / 60 Hz
(luminaires in accordance with ANSI IEC C78.81)
Voltage Lamp standard Size 2 Size 4
230 V IEC 60081 max. 210 mA max. 340 mA
110 V IEC 60081 max. 410 mA max. 750 mA
120 V ANSI IEC C78.81 max. 370 mA max. 670 mA
Type 10 A 16 A 20 A 25 A
B11 18 23 30
C19 32 40 50
K40 65 81 102

226311 / 600960300010
2020-04-17·BA00·III·en·04
Technical data
9
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
Power factor
THD
Disconnection
of the light
When opening the luminaire
Switch with safety lock; when opening the central lock, all poles of the voltage
supply to the control gear are disconnected; contacts of the switching element
are positive opening, they can only be switched on again when the translucent
cover and the central locking system are closed.
In case of a lamp failure, the control gear disconnects the defective lamp from
the power supply.
Protection class I (with internal PE connection)
Luminous characteristics
Lamps 2 x 18 W; 2 x 36 W (in accordance with IEC 60081)
2 x 17 W; 2 x 32 W (in accordance with ANSI IEC C78.81)
Measures for
light guidance
Ambient conditions
Ambient temperature -30 to +50 °C (1, 2)
(1) Rated operating time during emergency light operation
is guaranteed within an ambient temperature range of -5 °C to +50 °C.
This also applies to charging and discharging of the battery. The rated
operating time might be reduced if used outside this temperature range.
(2)Battery service life
is guaranteed within an ambient temperature range of -30 °C to +50 °C
according to IEC/EN 60598-2-22.
Storage temperature -30 to +60 °C
Technical Data
Voltage Lamp standard Power factor
230 V IEC 60081 ≥ 0.93
110 V IEC 60081 ≥ 0.97
120 V ANSI IEC C78.81 ≥ 0.97
Voltage Lamp standard Size 2 Size 4
230 V IEC 60081 11.9% 10.8%
110 V IEC 60081 10.8% 9.6%
120 V ANSI IEC C78.81 9.7% 8.0%
Standard: Wide-beam, the luminaire reflector is white
Lateral glare reduction in the translucent cover

Technical data
10 226311 / 600960300010
2020-04-17·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
Mechanical data
Degree of protection IP66 / IP67 (IEC 60598)
IP64 if a breather is used
Impact strength
(IK code)
IK10 (IEC 62262)
Material
Enclosure Polyester resin, glass fibre reinforced
Enclosure colours Grey colour, similar to RAL 7035
Lamp cover Polycarbonate
Seal Silicone seal, foamed into the translucent cover
Luminaire locking Central lock for M8 / A/F 13 box spanner;
the translucent cover can be swivelled on its hinge
Mounting / Installation
Cable glands
Connection Spring clamp terminals
6-pole: L1, L2, L3, L', N, PE
Clamping range:
1 x 1.5 to 6 mm2 (solid)
1 x 1.5 to 4 mm2 (finely stranded)
1 x 1.5 to 6 mm2 (finely stranded with core end sleeve)
(2 free clamping units per pole available)
Through wiring
Technical Data
Standard luminaire
Plastic: 2 x M25 x 1.5 cable entry 8161 and
2 x M25 x 1.5 stopping plugs 8290 (enclosed)
Metal: 2 x metal plates M20 x 1.5 connected by
means of PE for metal cable entries
Attention: cable entries must be ordered separately
Special
version:
max. 4 drilled holes for M20, M25, NPSM ½"
max. 2 drilled holes for NPT ¾"
Metal cable glands: M20 x 1.5, M25 x 1.5;
earthing metal cable entries
using metal plates
Standard
luminaire
with
Luminaries are equipped with internal through wiring.
Connection of ingoing and outgoing leads on
opposite sites is possible.
Terminals: See Tech. data
Wiring cross section of the supply line connection:
2.5 mm2 for max. 16 A
(Observe service temperature)
Optional without
On the connection side, there are 2 bores M25 x 1.5
for cable entries for through wiring of the connection line
(ingoing and outgoing leads on one side).

226311 / 600960300010
2020-04-17·BA00·III·en·04
Technical data
11
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
For further technical data, see r-stahl.com.
Assembly
Control gear
Emergency
light mode
In the emergency light mode, only one lamp is used, which results in reduced
light output
Rated operating time At optimal ambient temperature of the battery:
Switchover voltage From mains to battery operation at U < 0.74 x UN
From battery to mains operation at U > 0.80 x UN
Battery set
Version NiCd battery, gas-tight
Operating voltage 6 V
Capacity 7 Ah
Replacing the
battery set
When opening the battery enclosure, the connection between the battery and
the control gear is disconnected by means of a switch.
The battery set can be replaced after disconnecting the plug-in contacts.
Optional
Breather Breather 8162/1 from R.STAHL Schaltgeräte GmbH
The breather guarantees compliance with degree of protection IP64
in all mounting positions. The breather may not be used in atmospheres with
corrosive gases.
Technical Data
Standard luminaire
Standard: 2 x M8 insert nuts in the enclosure
Special
version:
Mounting grooves in the enclosure for use of mounting
and tops rails for variable luminaire mounting
(variable mounting distances for luminaires
Size 2: 320 to 480 mm;
size 4: 670 to 930 mm)
Battery
capacity
Rated operating
time
Emergency light output
Size 2 Size 4
7 Ah 1.5 h 100% 60%
3.0 h 60% 30%

Engineering
12 226311 / 600960300010
2020-04-17·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
6 Engineering
6.1 Mains operation
6.1.1 Stand-by operation
• The light fitting is switched off.
6.1.2 Continuous operation
• The light fitting is switched on.
6.1.3 Normal lighting operation
• The light fitting is operated by normal lighting.
16397E00
16398E00
16399E00
PE
N
L1
L´ PE N L1 L2 L3
PE
N
L1
L´ PE N L1 L2 L3
PE
N
L1
L´ PE N L1 L2 L3

226311 / 600960300010
2020-04-17·BA00·III·en·04
Engineering
13
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
6.2 Emergency light blocking
A remote switch for emergency light blocking can be connected to terminals 9 and 10 of
the control gear.
6.2.1 Connection version remote switch
The remote switch is directly connected to the control gear.
The following connection versions are possible:
Point-to-point connection
16400E00
Remote switch is closed Remote switch is opened
Power supply
operation
Switching on the luminaire
depending on operating mode
Switching on the luminaire
depending on operating mode
Power failure Emergency light function No emergency light function
18474E00
14
13
12
11
10
9
8
F
LED green
LED grün
LED red
LED rot
mit Brücke ohne Brücke
with jumper without jumper
3 h 1,5 h
BAT-
BAT+
Fernschalter
Remote switch
Fernschalter
Remote switch

Engineering
14 226311 / 600960300010
2020-04-17·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
Linear connection
The following conductor specifications must be observed during connection.
18473E00
Point-to-point connection Linear connection
maximum conductor length
x 1 500 m 100 m
x 2 50 m
x 3 500 m
maximum number of light fittings 50 30
Cable cross section 1.5 mm21.5 mm2

226311 / 600960300010
2020-04-17·BA00·III·en·04
Transport and storage
15
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
7 Transport and storage
7.1 General
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) and vibration-free.
• Do not drop the device.
7.2 Batteries
• Do not transport together with other materials.
• Do not transport in explosive dust atmosphere.
• Handle with care.
• Store protected from fire, sources of dust, harmful gases and liquids.
• Store in a dry and cool location.
Recommendation:
• Store battery at an ambient temperature of +5 to +25 °C and a relative humidity of
65 ±5 %. The storage period is reduced of up to one month if stored outside this
temperature range.
8 Mounting and installation
NOTICE
Risk of deep battery discharge due to exceeded storage!
Non-compliance can result in material damage!
• The battery should be charged within 26 weeks from date of production by
means of operating the luminaire.
DANGER
Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.
• Carry out installation strictly according to the instructions and national
safety and accident prevention regulations to maintain the explosion
protection.
• Select and install the electrical device so that explosion protection is not
affected due to external influences, i.e. pressure conditions, chemical,
mechanical, thermal and electric impact such as vibration, humidity and
corrosion (see IEC/EN 60079-14).
• The device must only be installed by trained qualified personnel who is
familiar with the relevant standards.
NOTICE
Malfunction or device damage caused by condensation.
Non-compliance can result in material damage!
• operate the luminaire continuously or periodically over extended periods of time.
• avoid thermal bridges.

Mounting and installation
16 226311 / 600960300010
2020-04-17·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
8.1 Dimensions / fastening dimensions
Dimensional drawings (all dimensions in mm [inches]) – Subject to modification
16127E00
EXLUX 6009/5
Dimensional drawings for assembly parts and accessories
(all dimensions in mm) – Subject to alterations
15778E00 15779E00
Mounting rail
M25 x 1,5
183,5 [7,22]
125
L3
L2
L1
L3
L2
[4,92]
M25 x 1,5
Dimen-
sions
Light fitting
Size 2 Size 4
L1 857 [33.74] 1467 [57.76]
L2 1) 400 [15.75] 800 [31.50]
L3 2) 320 to 480 [12.60 to 18.90] 670 to 930 [26.38 to 36.61]
1) fixed mounting distance
2) variable mounting distance
9
30
9
6,10
ø 8,10
32 [1,26]
12
[, ]0 47
18,50
[, ]0 73
30,50
[, ]1 20
74 [ , ]2 91
86 [ , ]3 39
124 4 88[, ] 11 [ , ]0 43
[0,35]
[1,18].
[ø 0 24,].[ø 0,32] [0,35]
[0,24]
ø 6,10
215 8.46[]
215 [
193 - 198 [7,60 - 7,80]
13 [0,51]

226311 / 600960300010
2020-04-17·BA00·III·en·04
Mounting and installation
17
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
15782E00 15781E00 15783E00
Ring bolt fitted
in insert nut of
the luminaire
Mounting bracket
fitted in mounting
rail
Pipe clamp fitted
in mounting rail
15780E00
Wall mounting bracket
fitted in mounting rail
17755E00
Dimensions Light fitting
Size 2 Size 4
L1 1135 [44.69] 1744 [68.66]
L2 390 [15.35] 338 [13.31]
Linear luminaire EXLUX with pole mounting sleeve
Dimensional drawings for assembly parts and accessories
(all dimensions in mm) – Subject to alterations
Ø
42
± 0,60
[ 1,65 ]
Ø
± 0,02

Mounting and installation
18 226311 / 600960300010
2020-04-17·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
8.2 Mounting / dismounting, operating position
Suspension at fixed mounting points
DANGER
Explosion hazard due to electrostatic discharge!
Non-compliance results in severe or fatal injuries.
Do not use the luminaire in strong charge generating environments!
The following processes/activities should be avoided:
• accidental friction
• particle currents
DANGER
Explosion hazard due to inadmissible heating!
Non-compliance results in severe or fatal injuries.
• Avoid external heat sources and/or direct sunlight (risk of change of
temperature class or change of maximum permissible surface
temperature).
• Do not exceed the maximum ambient temperature due to external heat
sources (premature failure of equipment).
The luminaire is suitable for wall and ceiling mounting.
In event of wall mounting in outdoor areas, avoid installation with central lock
at top.
The mounting position with upward light emission in outdoor areas is
prohibited.
16324E00
max. screw-in depth 10 mm [0.39]
L2
Size L2 mm [inch]
2 400 [15.75]
4 800 [31.50]

226311 / 600960300010
2020-04-17·BA00·III·en·04
Mounting and installation
19
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
Suspension at movable mounting parts
Pole mounting using pole mounting sleeve
16325E00 16326E00
Mounting bracket Top rail
Lateral mounting pockets for variable points of suspension.
When mounting the luminaire using top rails, ensure that the mounting
surface is flat. Otherwise, the enclosure might be mounted in a warped/
twisted way. The result is leakage of the luminaire and difficulties in replacing
the translucent cover.
18483E00
18482E00
L
L4
L
L
L4
L
Size L4 mm [inch] L mm [inch]
2 320 [12.60] 80 [3.15]
4 670 [26.38] 130 [5.12]

Mounting and installation
20 226311 / 600960300010
2020-04-17·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Emergency luminaire for fluorescent lamps
Series EXLUX 6009/5
Pole suspension
Pole mounting using pipe clamps
16327E00
16328E00
Size L4 mm [inch] L mm [inch]
2 320 [12.60] 80 [3.15]
4 670 [26.38] 130 [5.12]
For pipe clamp mounting, use the solution of R. STAHL Schaltgeräte GmbH
with integrated mounting rail providing reliable and stable four-point fixing!
In case of point suspension using pipe clamps,
R. STAHL Schaltgeräte GmbH does not guarantee the strength and
tightness of the luminaire!
L
L
L4