Stahl YL60/2 Series User manual

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Operating Instructions
Additional languages r-stahl.com
EN
Audible and visual signalling device
Series YL60/2

2
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
Table of Contents
1 General information ............................................................................................3
1.1 Manufacturer .......................................................................................................3
1.2 Information regarding the operating instructions .................................................3
1.3 Further documents ..............................................................................................3
1.4 Conformity with standards and regulations .........................................................3
2 Explanation of symbols .......................................................................................4
2.1 Symbols used in these operating instructions .....................................................4
2.2 Warning notes .....................................................................................................4
2.3 Symbols on the device ........................................................................................5
3 Safety information ...............................................................................................6
3.1 Operating instructions storage ............................................................................6
3.2 Personnel qualification ........................................................................................6
3.3 Safe use ..............................................................................................................6
3.4 Modifications and alterations ..............................................................................7
4 Function and device design ................................................................................7
4.1 Function ..............................................................................................................7
4.2 Device design .....................................................................................................8
5 Technical data .....................................................................................................9
6 Transport and storage .......................................................................................15
7 Mounting and installation ..................................................................................16
7.1 Dimensions/Fastening dimensions ...................................................................16
7.2 Mounting/dismounting, operating position ........................................................17
7.3 Installation .........................................................................................................18
8 Commissioning .................................................................................................33
8.1 Prerequisites .....................................................................................................33
8.2 Testing ..............................................................................................................33
9 Operation ..........................................................................................................34
9.1 Troubleshooting ................................................................................................34
10 Maintenance, overhaul, repair ..........................................................................34
10.1 Maintenance and overhaul ................................................................................34
10.2 Repair ...............................................................................................................34
10.3 Returning the device .........................................................................................35
11 Cleaning ............................................................................................................35
12 Disposal ............................................................................................................35
13 Accessories and spare parts ............................................................................35

276786 / YL6060300190
2021-05-14·BA00·III·en·00
General information
3
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
1 General information
1.1 Manufacturer
1.2 Information regarding the operating instructions
ID no.: 276786 / YL6060300190
Publication code: 2021-05-14·BA00·III·en·00
The original instructions are the English version.
They are legally binding in all legal affairs.
1.3 Further documents
• Data sheet
For documents in other languages, see r-stahl.com.
1.4 Conformity with standards and regulations
See certificates and EC Declaration of Conformity: r-stahl.com.
The device has IECEx approval. See IECEx homepage:
http://iecex.iec.ch/ to view the certificate
R. STAHL Schaltgeräte GmbH
Business Unit Lighting & Signalling
Nordstr. 10
99427 Weimar
Germany
R. STAHL Schaltgeräte GmbH
Am Bahnhof 30
74638 Waldenburg
Germany
Tel.:
Fax:
Internet:
E-mail:
[phone]
[phone]
r-stahl.com
[email protected]
Tel.:
Fax:
Internet:
E-mail:
[phone]
[phone]
r-stahl.com
[email protected]

Explanation of symbols
4276786 / YL6060300190
2021-05-14·BA00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
2 Explanation of symbols
2.1 Symbols used in these operating instructions
2.2 Warning notes
Warning notes must be observed under all circumstances, in order to minimise the risk
resulting from design engineering and operation. The warning notes have the following
structure:
• Signalling word: DANGER, WARNING, CAUTION, NOTICE
• Type and source of danger/damage
• Consequences of hazard
• Taking countermeasures to avoid the danger or damage
Symbol Meaning
Tips and recommendations on the use of the device
General danger
Danger due to explosive atmosphere
DANGER
Danger to persons
Non-compliance with the instruction results in severe or fatal
injuries to persons.
WARNING
Danger to persons
Non-compliance with the instruction can result in severe or fatal
injuries to persons.
CAUTION
Danger to persons
Non-compliance with the instruction can result in light injuries to persons.
NOTE
Avoiding material damage
Non-compliance with the instruction can result in material damage to the device and/or
its environment.

276786 / YL6060300190
2021-05-14·BA00·III·en·00
Explanation of symbols
5
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
2.3 Symbols on the device
Symbol Meaning
05594E00
CE marking according to the current applicable directive.
02198E00
Device certified for hazardous areas according to the marking.
15649E00
Input
15648E00
Output
11048E00
Safety notes that must always be observed: The corresponding data
and/or safety-related instructions contained in the operating instructions
must be followed for devices with this symbol!
20690E00
Marking according to WEEE directive 2012/19/EU

Safety information
6276786 / YL6060300190
2021-05-14·BA00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
3 Safety information
3.1 Operating instructions storage
• Carefully read the operating instructions.
• Store the operating instructions at the mounting location of the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
3.2 Personnel qualification
Qualified specialist personnel is required to perform the activities described in these
operating instructions. This primarily applies to work in the following areas:
• Project engineering
• Mounting/dismounting the device
• (Electrical) Installation
• Commissioning
• Maintenance, repair, cleaning
Specialists who perform these tasks must have a level of knowledge that meets
applicable national standards and regulations.
Additional knowledge is required for activities in hazardous areas!
R. STAHL recommends having a level of knowledge equal to that described in the
following standards:
• IEC/EN 60079-14 (Electrical installations design, selection and erection)
• IEC/EN 60079-17 (Inspection and maintenance of electrical installations)
• IEC/EN 60079-19 (Equipment repair, overhaul and reclamation)
3.3 Safe use
Before installation
• Read and observe the safety notes in these operating instructions!
• Ensure that the contents of these operating instructions are fully understood by the
personnel in charge.
• Use the device in accordance with its intended and approved purpose only.
• Always consult R. STAHL Schaltgeräte GmbH if using the device under operating
conditions which are not covered by the technical data.
• Make sure that the device is not damaged.
• We cannot be held liable for damage to the device caused by incorrect or unauthorised
use or non-compliance with these operating instructions.
For mounting and installation
• Have mounting and installation performed only by qualified and authorised persons
(see chapter "Qualification of the personnel").
• The device is only to be installed in areas for which it is suited based on its marking.
• During installation and operation observe the information (characteristic values and
rated operating conditions) on the rating and data plates as well as the information
plates located on the device.
• Before installation, make sure that the device is not damaged.

276786 / YL6060300190
2021-05-14·BA00·III·en·00
Function and device design
7
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
Commissioning, maintenance, repair
• Only have commissioning and repairs performed by qualified and authorised persons
(see "Qualification of the personnel" section).
• Before commissioning, make sure that the device is not damaged.
• Perform only maintenance work described in these operating instructions.
3.4 Modifications and alterations
4 Function and device design
4.1 Function
Application range
The series YL60/2 signalling device is intended for use in explosive or harsh
environments. It is used in gas hazardous areas in Zones 1 and 2, as well as in
dust hazardous areas in Zones 21 and 22.
Mode of operation
When activated, the signalling device emits a visible and audible signal, depending on
the configuration and device version.
DANGER
Explosion hazard due to modifications and alterations to the device!
Non-compliance results in severe or fatal injuries.
• Do not modify or change the device.
No liability or warranty for damage resulting from modifications and
alterations.
DANGER
Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.
• Use the device only according to the operating conditions described in
these operating instructions.
• Use the device only for the intended purpose specified in these
operating instructions.

Function and device design
8276786 / YL6060300190
2021-05-14·BA00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
4.2 Device design
15256E00
1 Screws 4 Horn flange
2 Horn cover 5 PCB
3 Cheese head screws 6 Enclosure
2
1
3
4
5
6

276786 / YL6060300190
2021-05-14·BA00·III·en·00
Technical data
9
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
5 Technical data
Explosion protection
Global (IECEx)
Gas and dust IECEx EPS 20.0037X
Ex db IIC T.*) Gb
Ex tb IIIC T... °C*) Db
Europe (ATEX)
Gas and dust EPS 20 ATEX 1 007 X
E II 2 G Ex db IIC T.*) Gb
E II 2 D Ex tb IIIC T... °C*) Db
1) Loop in/loop out wiring up to max. 10 A
2) Loop in/loop out wiring up to max. 10 A, connection line and cable entries with
permissible operating temperature ) +90 °C required
Special conditions "X"
Repair work on flameproof joints is only permissible in accordance with the
values specified by the manufacturer.
The protective covers and loudspeaker trumpets must be installed so that they
are protected against electrostatic charge.
The ambient temperature range for dust applications is max. -35 to +50 °C or
+70 °C.
For gas Ex applications, the ambient temperature can be as low as -45 °C.
The strength class of the screws used must be at least A2-70.
Certifications and certificates
Certificates IECEx, ATEX
*) Temperature class T6 T4
Max. surface temperature (tb) T 80 °C T 100 °C
Ambient temperature range (db) -45 to +50 °C 1) -45 to +70 °C 2)
Ambient temperature range (tb) -35 to +50 °C 1) -35 to +70 °C 2)

Technical data
10 276786 / YL6060300190
2021-05-14·BA00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
Technical data
Technical data
Product weight 6 kg
Electrical data
Rated
operating voltage
21.1 to 24 V DC
Average input
power/max. current
consumption
Ambient temperature range
Functional
temperature range
1) Loop in/loop out wiring up to max. 10 A
2) Loop in/loop out wiring up to max. 10 A, connection line and cable entries with
permissible operating temperature ≥ +90 °C required
Mechanical data
Degree of protection IP66 (IEC/EN 60529)
Material
Enclosure Aluminium 6005A – T6, seawater-resistant
Horn ABS, flame retardant
Calotte
covering
Polycarbonate
Fastening Stainless steel
Cable
entries
2 cable entries, equipped with:
1 x Exd M20 stopping plug, red
1 x dust cap M20, red
Max. current
consumption
[mA]
Average power
[W]
Horn 300 6
XENON 5J 350 6.5
LED 400 6.5
In flash mode 1200 6.5
Horn – XENON 5J 650 12.5
Horn – LED 700 12.5
In flash mode 1500 12.5
Temperature class T6 T4
Max. surface temperature (tb) T 80 °C T 100 °C
Ambient temperature range (db) -40 to +50 °C 1) -40 to +70 °C 2)
Ambient temperature range (tb) -35 to +50 °C 1) -35 to +70 °C 2)

276786 / YL6060300190
2021-05-14·BA00·III·en·00
Technical data
11
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
Acoustic data
Volume ( 110 dB(A) @ 1 m
Calculated
max. range
Pole diagram
15288E00
22495E00
Technical data
Inform [80 dB(A)] 15 m
Warn [85 dB(A)] 8 m
Alarm [90 dB(A)] 4 m
H

Technical data
12 276786 / YL6060300190
2021-05-14·BA00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
Optical data
Calculated
max. range
LED disc:
LED tower:
XENON:
Technical data
Inform Alarm
Function Flashing
1 Hz
Blinking
1 Hz
Flashing
1 Hz
Blinking
1 Hz
Colour Red 45 m 58 m 10 m 13 m
Amber 69 m 89 m 15 m 20 m
Blue 38 m 48 m 8 m 11 m
Green 36 m 46 m 8 m 10 m
Clear 86 m 111 m 19 m 25 m
Opal 74 m 94 m 16 m 21 m
Yellow 83 m 106 m 19 m 24 m
Magenta 19 m 25 m 4 m 6 m
Inform Alarm
Function Flashing
1 Hz
Blinking
1 Hz
Flashing
1 Hz
Blinking
1 Hz
Colour Red 52 m 67 m 12 m 15 m
Amber 87 m 111 m 19 m 25 m
Blue 47 m 61 m 11 m 14 m
Green 45 m 57 m 10 m 13 m
Clear 109 m 139 m 24 m 31 m
Opal 92 m 118 m 21 m 26 m
Yellow 104 m 133 m 23 m 30 m
Magenta 24 m 31 m 5 m 7 m
Inform Alarm
Function Flashing 1 Hz Flashing 1 Hz
Colour Red 35 m 8 m
Amber 62 m 14 m
Blue 32 m 7 m
Green 32 m 7 m
Clear 82 m 18 m
Opal 57 m 13 m
Yellow 77 m 17 m
Magenta 21 m 5 m

276786 / YL6060300190
2021-05-14·BA00·III·en·00
Technical data
13
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
Luminous characteristics
Effective luminous
intensity
Luminous flux
Technical data
Type LED disc LED tower XENON
Function Flashing
1 Hz
Blinking
1 Hz
Flashing
1 Hz
Blinking
1 Hz
Flashing
1 Hz
Colour Red 41 cd 67 cd 55 cd 90 cd 24 cd
Amber 96 cd 157 cd 151 cd 248 cd 76 cd
Blue 28 cd 47 cd 45 cd 74 cd 20 cd
Green 25 cd 42 cd 40 cd 66 cd 21 cd
Clear 150 cd 245 cd 236 cd 387 cd 136 cd
Opal 108 cd 178 cd 171 cd 280 cd 66 cd
Yellow 138 cd 226 cd 217 cd 356 cd 119 cd
Magenta 7 cd 12 cd 12 cd 19 cd 9 cd
Type LED disc LED tower
Function Continuous light Continuous light
Colour Red 99 lm 236 lm
Amber 233 lm 573 lm
Blue 69 lm 170 lm
Green 62 lm 152 lm
Clear 365 lm 895 lm
Opal 264 lm 648 lm
Yellow 335 lm 824 lm
Magenta 18 lm 45 lm

Technical data
14 276786 / YL6060300190
2021-05-14·BA00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
Pole diagram XENON:
22498E00
LED tower:
22497E00
LED disc:
22496E00
Technical data
30°
45°
60°
75°
90°
105°
120°
135°
150°
165° 180° 165°
150°
135°
120°
105°
90°
75°
60°
45°
30°
15°
0°
[cd]
C0 - C180
20% 40% 60% 80% 100%
15°
C90 - C270
30°
45°
60°
75°
90°
105°
120°
135°
150°
165° 180° 165°
150°
135°
120°
105°
90°
75°
60°
45°
30°
15°
0°
[cd]
C0 - C90 - C180 - C270
20% 40% 60% 80% 100%
15°
30°
45°
60°
75°
90°
105°
120°
135°
150°
165° 180° 165°
150°
135°
120°
105°
90°
75°
60°
45°
30°
15°
0°
[cd]
C0 - C90 - C180 - C270
20% 40% 60% 80% 100%
15°

276786 / YL6060300190
2021-05-14·BA00·III·en·00
Transport and storage
15
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
For further technical data, see r-stahl.com.
6 Transport and storage
• Transport and store the device only in the original packaging.
• Store the device in a dry place (no condensation) free of vibrations.
• Do not drop the device.
Flash energy XENON: 5 J
Signal function LED:
- Continuous light (maximum, dimmed)
- Flashing light, (single flash, double flash, triple flash 1 Hz/2 Hz/ 3 Hz)
- Flashing light (1 Hz/1.5 Hz/2 Hz)
- Rotating light (90 rpm, 120 rpm, 180 rpm)
- Chaos light
XENON:
- Flashing light (single flash 1 Hz)
Mounting/installation
Scope of delivery - Signalling device according to configuration
- L-bracket
- Dust caps
Technical data

Mounting and installation
16 276786 / YL6060300190
2021-05-14·BA00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
7 Mounting and installation
7.1 Dimensions/Fastening dimensions
Dimensional drawings (all dimensions in mm [inches]) – Subject to change
18380E00

276786 / YL6060300190
2021-05-14·BA00·III·en·00
Mounting and installation
17
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
7.2 Mounting/dismounting, operating position
DANGER
Explosion hazard due to improper mounting!
Non-compliance results in severe or fatal injuries.
• Only operate the device if it is not damaged. If the thread is damaged,
replace the device immediately.
• Only install the device in a clean and dry operating environment.
• Only mount the device on a wall or on a suitable surface.
• Carefully protect exposed joint surfaces from damage, dust and dirt.
• Install end flanges without applying force (without hammer and tool)
in straight alignment.
• If necessary, fit core end sleeves gas-tight and using a suitable tool.
DANGER
Explosion hazard due to electrostatic discharge!
Non-compliance results in severe or fatal injuries.
Do not use the device in strong charge-generating environments.
The following processes/activities should be avoided:
• Accidental friction
• Particle flows
DANGER
Explosion hazard due to open holes, unused cable entries and cable glands!
Non-compliance results in severe or fatal injuries.
• Only use cable entries and stopping plugs that have been separately
checked and certified in accordance with Directive 2014/34/EU (ATEX)
and IECEx (CoC), and which technically correspond to the state of
technology given in the certificate.
• The IP level of protection of the cable entries and stopping plugs
must at least correspond to the IP level of protection of the device
(see marking on the device).
• When selecting cable glands, observe the thread type and thread size
in the component documentation.
• Seal the thread with non-curing thread sealant in order to guarantee the
IP66 degree of protection.
• Always close unused holes, cable entries and cable glands using
approved stopping plugs or plugs. Observe IEC/EN 60079-14 for this.
• Installation of the cable gland must be performed in accordance with the
manufacturer's instructions.
• The cable entry temperature may exceed 70 °C.

Mounting and installation
18 276786 / YL6060300190
2021-05-14·BA00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
• Select a mounting location that is suitable for the signal effect of the device, as well as
the required mounting and installation parameters (see "Technical data" section).
• Mount the device on a flat surface using the L-bracket and screw holes.
• Mount suitable approved electrical lines (see "Technical data" chapter) using a
suitable flameproof cable entry.
• Close unused entries using certified, flameproof stopping plugs.
7.3 Installation
The electrical installation and configuration of the device is performed in the following
sequence:
• Dismounting the device (see Section 7.3.1)
• Electrical connections (see Section 7.3.2)
• Configuration (see Section 7.3.3)
• Mounting the device (see Section 7.3.4)
• Mounting the earth connection (see Section 7.3.5)
7.3.1 Dismounting the device
22499E00
• Loosen the 3 PT screws (4.0 x 12) (1)
and remove the trumpet cover (2).
22500E00
• Loosen the 4 cheese-head screws
(M5 x 16) (3) and remove the horn
flange (7).
2
1
7
3

276786 / YL6060300190
2021-05-14·BA00·III·en·00
Mounting and installation
19
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
22501E00
• Disconnect the plug connector
between the horn flange (7) and
PCB (8).
22502E00
• Remove the PCB (8) from the
enclosure (6).
8
7
8
6

Mounting and installation
20 276786 / YL6060300190
2021-05-14·BA00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Audible and visual signalling device
Series YL60/2
7.3.2 Electrical connections
• Lay the pre-installed cabling in the intended electrical connections – see figure.
DANGER
Explosion hazard due to insufficient protective measures!
Non-compliance results in severe or fatal injuries.
• Select suitable cables to ensure that the maximum permissible
conductor temperatures are not exceeded.
• When using core end sleeves, attach them using a suitable tool.
• The conductor insulation must be touching the terminal.
• Do not damage the conductor (e.g. nicking) when stripping it.
• Finally, check the conductor to ensure that it is secure (fixed).
22503E00
22504E00
9 Control (A/B signal) 11 Power supply
audible signal
10 Power supply
visual signal
11
10
9
B A
Sounder LED
0V 24V 0V 24V
911
10