Stamina 55-1521 User manual

55-1521
STAMINA PRODUCTS
MADE IN CHINA
Product May Vary Slightly
From Pictured.
Owner's Manual
CAUTION:
! WARNING !
Exercise can present a health
risk. Consult a physician
beforebeginninganyexercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Followallsafetyinstructionsin
this manual.
When calling for parts or
service, please specify the
following number.
Weight on this product should not exceed 250 lbs.
Class H equipment: This equipment is for home
use only. It is not for commercial use.
1.
2.
2005, 12
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 [phone]
www.staminaproducts.com
This Product is Produced Exclusively by
2005 Stamina Products, Inc.

SAFETY INSTRUCTIONS
2
WARNING:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Read all warnings posted on the Seated Inversion System.
The Seated Inversion System should only be used after a thorough review of the Owner's Manual.
We recommend that two people be available for assembly of this product.
Do not use the Seated Inversion System alone. Always have a helper available in case assistance
is needed in recovering from the decline position.
Always use the seat belt. Make sure the seat belt is securely fastened before inverting.
You must understand how to recover from the inverted position before using the Seated Inversion
System. Read the LEVER OPERATION section on page 14 BEFORE using the Seated Inversion
System.
Do not allow children to use or play on the Seated Inversion System.
Keep small children and pets away from the Seated Inversion System at all times.
The Seated Inversion System should not be used by persons weighing more than 250 lbs.
The Seated Inversion System should not be used by persons over 6 feet 6 inches tall.
It is recommended that you place this exercise equipment on an equipment mat.
Use the Seated Inversion System only on a level surface.
Wear appropriate clothing when exercising; do not wear loose clothing that could become caught in
the Seated Inversion System.
Be sure that there is enough room for the seat to rotate completely.
Use the Seated Inversion System only as described in the manual.
The safety level of the Seated Inversion System can be maintained only if it is examined regularly
for damage and wear.
This equipment is for home use only. It is not for commercial use.
Maintenance Instructions 15
Product Parts Drawing 16
Parts List 17
Warranty 19
Notes 20
Fax/Mail Ordering Form 22
Safety Instructions 2
Before You Begin 4
Hardware Identification Chart 5
Assembly Instructions 6
Operational Instructions 12
Storage 15
TABLE OF CONTENTS Page Page
Extreme obesity
Glaucoma, retinal detachment or conjunctivitis
Pregnancy
Spinal injury, Cerebral Sclerosis, or acutely swollen joints
Middle ear infection
High blood pressure, Hypertension, Recent stroke or Transient ischemic attack
Heart or circulatory disorders for which you are being treated
Hiatus hernia or Ventral hernia
Bone weaknesses including Osteoporosis, Unhealed fractures, Medullary pins, or
Surgically implanted orthopedic supports.
Use of anti-coagulants including Aspirin in high doses.
WARNING: Before using this equipment you should consult with your personal physician to see if
inversion equipment is appropriate for you. Do not use this equipment without your physician's
approval. Do not use this equipment if you have any of the following conditions or ailments:
To reduce the risk of serious injury, read the following safety instructions before
using the Seated Inversion System.

THANK YOU FOR PURCHASING THE
Seated Inversion System
Simply follow the few assembly instructions set forth in this manual.
Within a few minutes you will be getting
your body into shape and on your way to achieving
a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 [phone]
Monday - Friday, 8:00 A.M. - 5:00 P.M., Central Time.
CALL US FIRST
3

BEFORE YOU BEGIN
Thank you for choosing the Seated Inversion
System. We take great pride in producing this
quality product and hope it will provide many hours
ofqualityexercisetomakeyoufeelbetter, look better
and enjoy life to its fullest.
Yes, it's a proven fact that a regular exercise
program can improve your physical and mental
health. Too often, our busy lifestyles limit our time
and opportunity toexercise. TheSeated Inversion
System provides a convenient and simple method
to begin your assault on getting your body in shape
and achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
ReadthismanualcarefullybeforeusingtheSeated
Inversion System.
Although Stamina tries to manufacture its products
with the finest materials and uses the highest
standards of manufacturing, occasionally a part that
does not fit, is the incorrect size, or is otherwise
inappropriate is found. Even with the highest
inspection and quality controls in place these things
will happen occasionally. Please do not return the
product. For your convenience, Stamina has a
Customer Service Department with a toll-free
number. If a part is missing, does not fit, is the
incorrect size, or is otherwise inappropriate, please
call1(800)375-7520(intheU.S.)between8:00A.M.
and 5:00 P.M. CentralTime, Monday through Friday.
Our operators will be able to assist you with your
problem and the parts will be mailed directly to your
house.
4
Left Pivot Arm
Connecting Bar
Right Front Frame
Handrail
Back Cushion
Foam Support
Handrail
Seat Belt
Seat Cushion
Leg Support Cushion
Rear Frame
Lever
Foam Pad
Left Front Frame
THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY :
Allen Wrench (4mm)
Allen Wrench (6mm)
Wrench
Combination Wrench

5
Part No. and Description Qty
NOTE: Some of the hardware items listed may be attached to other parts.
34 Acorn Nut (M5 x 0.8) 1
49 Bolt, Flat Head (M6 x 1 x 50mm) 6
51 Bolt, Button Head (M8 x 1.25 x 15mm) 28
50 Bolt, Button Head (M6 x 1 x 47mm) 1
52 Bolt, Button Head (M8 x 1.25 x 45mm) 4
53 Bolt, Button Head (M8 x 1.25 x 50mm) 2
54 Bolt, Button Head (M8 x 1.25 x 60mm) 4
55 Bolt, Hex Head (M10 x 1.5 x 90mm) 2
56 Nylock Nut (M6 x 1) 6
57 Nylock Nut (M8 x 1.25) 4
58 Nylock Nut (M10 x 1.5) 2
59 Washer (M6) 7
60 Washer (M8) 30
61 Washer (M10) 2
33 Washer (M5) 1
41 Large Washer (M8 x 32mm x 3mm thick) 2
32 Screw, Round Head (M5 x 0.8 x 18mm) 1
62 Arc Washer (M8) 10
HARDWARE IDENTIFICATION CHAT
Place washers, the end of bolts or screws on the circles to check for the
correct size. Use the small scale to check the sizes of bolts and screws.
This chart is provided to help identify the hardware used in the assembly process.
After unpacking the unit, open the hardware bag and make sure that you have the following items:
length
length
mm.
in.
INCHES
MILLIMETERS
11/2021/2 31/2 41/2 51/2 61/2
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
6 8 10 12
3/16" 5/16" 1/2"3/8"1/4"
NOTICE: The length of all kinds of screws and bolts are not included
themselves head, except the flat head screws and bolts.