Stanley CL2i User manual

Please read these instructions before operating the product
CL2i
2 - Beam Self-Leveling Cross Line Laser
77-120
Self-Leveling
GB
D
F
I
E
PT
NL
DK
SE
FIN
NO
PL
GR
CZ
RU
HU
SK
SI
BG
RO
EE
LV
TR
LT
HR

277-120
Carefully read the Safety Instructions and User Manual before using this product. The person
responsible for the instrument must ensure that all users understand and adhere to these
instructions.
Retain this manual for future reference.
IMPORTANT: The following labels are on your laser tool for your convenience and safety.
They indicate where the laser light is emitted by the level. ALWAYS BE AWARE of their
location when using the level.
1. Safety
2. Product Description
3. Specifications
4. Operating Instructions
5. Calibration
6. Maintenance and Care
7. Warranty
User Safety
Safety
Contents
EN 60825-1
LASER RADIATION - DO NOT
STARE INTO BEAM OR VIEW
DIRECTLY WITH
OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
MAX OUTPUT ≤ 1 mW @ 630 - 670 nm
GB
D
F
I
E
PT
NL
DK
SE
FIN
NO
PL
GR
CZ
RU
HU
SK
SI
BG
RO
EE
LV
GB
D
F
I
E
PT
NL
DK
SE
FIN
NO
PL
GR
CZ
RU
HU
SK
SI
BG
RO
EE
LV
TR
GB
D
F
I
E
PT
NL
DK
SE
FIN
NO
PL
GR
CZ
RU
HU
SK
SI
BG
RO
EE
LV
GB ENGLISH
GERMAN
FRENCH
ITALIAN
SPANISH
PORTUGUESE
DUTCH
DANISH
SWEDISH
FINNISH
NORWEGIAN
POLISH
GREEK
CZECH
RUSSIAN
HUNGARIAN
SLOVAKIAN
SLOVENIAN
BULGARIAN
ROMANIAN
ESTONIAN
LATVIAN
LITHUANIAN
TURKISH
CROATIAN
D
F
I
E
PT
NL
DK
SE
FIN
NO
PL
GR
CZ
RU
HU
SK
SI
BG
RO
EE
LV
LT LT LT LT
TR TR TR
HR HR HR HR

3
77-120
DO NOT remove any warning label(s) on the housing. This instrument must only be used for
leveling and layout tasks as outlined in this manual.
ALWAYS make sure that any bystanders in the vicinity of use are made aware of the
dangers of looking directly into the laser tool.
DO NOT use in combination with other optical instruments. Do not modify the instrument, or
make manipulations or use in other applications than those described in the manual.
DO NOT look into the beam with optical aids, such as magnifiers, binoculars or Telescopes.
DO NOT stare into the laser beam or direct it towards other persons. Make sure the
instrument is not set at eye level. Eye protection is normally afforded by natural aversion
responses such as the blink reflex.
DO NOT direct the laser beam at other persons.
ALWAYS turn the laser tool “OFF” when not in use. Leaving the laser tool “ON” increases
the risk of someone inadvertently staring into the laser beam.
DO NOT operate the laser tool in combustible areas such as in the presence of flammable
liquids, gases or dust.
DO NOT disassemble the laser tool. There are no user serviceable parts inside.
Disassembling the laser will void all warranties on the product. Do not modify the product in
any way. Modifying the laser tool may result in hazardous laser radiation exposure.
DO NOT use this instrument in areas where a risk of explosion is present.
NOTE: Since the laser beam is of the focused type, ensure you check the beam’s path over
a relatively long distance and take all necessary precautions to ensure the beam cannot
interfere with other persons.

477-120
WARNING: Batteries can explode or leak and can cause injury or fire. To reduce this risk:
ALWAYS follow all instructions and warnings on the battery label and package.
DO NOT short any battery terminals
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of them at the same time with new batteries
of the same brand and type.
DO NOT mix battery chemistries.
DO NOT dispose of batteries in fire.
ALWAYS keep batteries out of reach of children.
ALWAYS remove batteries if the device will not be used for several months.
NOTE: Ensure that the correct batteries as recommended are used.
NOTE: Ensure the batteries are inserted in the correct manner, with the correct polarity.
DO NOT dispose of this product with household waste.
ALWAYS dispose of batteries per local code.
PLEASE RECYCLE in line with local provisions for the collection and disposal of electrical
and electronic waste under the WEEE Directive.
Battery Safety
End of Life

5
77-120
ROHS Compliant
EN 60825-1
The Stanley Works declares that the CE Mark has been applied to
this product in accordance with the CE Marking Directive 93/68/
EEC.
This product conforms with EN60825-1:2007.
For further details please refer to www.stanleyworks.com.
Declaration of Conformity
Product Description
Package Contents
1. Laser Unit
2. Universal Mount Adapter
3. Laser Target
4. Carrying Case
5. Batteries (3 x AA)
6. User Manual

677-120
1
6
2
3
5
4
1
2
5
4
6
Product Overview
1. Window for Cross Beam Laser
2. Main Power / Transport Lock
3. Keyboard
4. Laser Warning Label
5. Battery Compartment Cover
Laser Unit
6. 1/4 - 20 Threaded Mount
3
Universal Mount Adapter
1. 1/4 - 20 Screw Mount
2. Magnet Mount
3. 5/8 - 11 Threaded Mount
4. Fold Out Legs for Tripod
5. Tightening Knobs
6. 1/4 - 20 to 5/8 - 11 Screw Mount Adapter

7
77-120
Specifications
Leveling Accuracy:
Horizontal / Vertical Accurracy
Working Range:
Working Distance:
with Laser Detector:
Laser Class:
Laser Wavelength:
Operating Time:
Power Voltage:
Power Supply:
IP Rating:
Operating Temperature Range:
Storage Temperature Range:
Weight (without Base and Batteries):
Size:
≤ 3 mm / 10 m (≤ 1/8 in / 30 ft)
≤ 3 mm / 10 m (≤ 1/8 in / 30 ft)
Self-Leveling to ± 4°
≤ 15 m (≤ 50 ft)
≤ 50 m (≤ 165 ft)
Class 1M
635 nm ± 5 nm
12 h
4,5 V
3 x AA Batteries (Alkaline)
IP54
-10° C to +40° C (+14° F to +104° F)
-20° C to +60° C (-4° F to +140° F)
230 g (8 oz)
88 mm × 48 mm × 90 mm
(3 1/2 in × 1 7/8 in × 3 1/2 in)

877-120
Operating Instructions
1. Turn laser unit to back. Open battery
compartment cover by bending tab out to
unlock.
Lift Out
+++
---
Battery Installation / Removal
2. Install / Remove batteries. Orient batteries
correctly when placing into laser unit.
3. Close and lock battery compartment
cover. Be sure tab snaps back into locking
feature.

9
77-120
Laser Mode
Laser Unit
OFF / Locked
Unlocked
Pulse Mode
3. Press laser mode key to toggle through
available laser modes - horizontal only,
vertical only, both horizontal and vertical,
self-leveling disabled, laser OFF.
2. Transport lock in unlocked position. Laser
power is ON. Right LED indicator lights green
when laser unit has self-leveled.
4. Mode 4 disables self-leveling feature and
allows both the horizontal and vertical
beams to be positioned in any orientation.
Right LED indicator lights red.
5. Press pulse mode key to toggle between
pulse mode ON and OFF. Left LED lights blue
when pulse mode on. Pulse mode allows use
with a laser detector.
1. Transport lock in locked position. Laser
power is OFF.
6. Laser beam(s) turn off and right LED lights
red to indicate the laser unit is out of
the working range for laser modes 1 - 3.
Reposition laser unit to be more level.

10 77-120
1. 1/4 - 20 screw mount to attach laser unit.
Allows for full 360° placement of the laser
unit.
7. Laser beam(s) will dim when battery power
is low. Replace batteries.
Universal Mount Adapter
360° Placement
3. 5/8 - 11 thread mount available for optional
accessories. Thread mount adapter stored on
unit. 1/4-20 inside thread, 5/8 - 11 outside
thread.
4. Attach to supportive magnetic objects with
the built in magnets.
5. Angles can be set and locked in both axis.
2. Can be used as a miniature tripod using the
fold out legs.
5/8 in
Standard Mount for
Optional Tripod Mounting
Tightening
Knobs