StarTech.com SATADOCK22UE User manual

Manual Revision: 03/07/2012
For the most up-to-date information, please visit: www.startech.com
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
SATADOCK22UE
SATDOCK2UEGB
SATDOCK2UEEU
eSATA USB 2.0 to SATA Dual Hard Drive
Docking Station
*actual product may vary from photos

Instruction Manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction Manual
i
Table of Contents
Introduction ...........................................................................................1
Features ........................................................................................................................................................ 1
Package Contents ..................................................................................................................................... 1
SATADOCK22UE ......................................................................................................................................... 2
Disk Installation ......................................................................................3
SATA Drive Removal ...............................................................................3
Preparing the Hard Drives for Use .......................................................4
Specications ..........................................................................................7
Technical Support ..................................................................................9
Warranty Information ............................................................................9

Instruction Manual
1
Introduction
Thank you for purchasing a StarTech.com SATA HD Docking station. This unit allows
you to install and access SATA drives quickly, and without the need for an enclosure.
Simply plug the hard drive into the upright dock and connect it to a PC or notebook.
The StarTech.com SATA HD Docking Station is a perfect solution for data recovery, drive
imaging, and testing centers, or any environment requiring fast access to uninstalled/
archived drives.
Features
• Hot Swap Compatible
• Plug and Play support for most operating systems
• Supports both SATA 2.5” and SATA 3.5” hard drives without and adapters
Package Contents
SATADOCK22UE
• 2x eSATA Cable
• Manual
• Power Adapter
• SATA Hard Drive Docking Station
• USB Cable

Instruction Manual
2
SATADOCK22UE
eSATA
Ports
USB
Port
Eject Buttons
Drive LEDs
DC
Power
Adapter

Instruction Manual
3
Disk Installation
1. Connect the Dock to an available power outlet, using the provided power adapter.
2. Connect the Dock to the (powered) Host Computer, using the provided USB/eSATA
cables.
3. Insert the 2.5” or 3.5” SATA/SATA II drive(s) you wish to install, such that the SATA
power and data connectors at the back of the drive are properly aligned with the
corresponding connectors inside the Dock.
4. Press the Power Button on the rear panel of the Dock
Once the drive has been inserted, the operating system will detect that it has been
connected and automatically update the drivers for proper operation.
SATA Drive Removal
If you are using the SATADOCK22UE, the drives can be removed using the eject button
that corresponds with the drive you wish to remove.
When removing the installed drive from the Dock, please ensure that you have
followed the appropriate steps (dependant on the operating system) to disconnect
removable storage. In Windows for example, click on the Safe Remove icon located in
the taskbar. Select the drive from the menu provided, then click Stop. Select the device
to disconnect, and click OK.

Instruction Manual
4
Preparing the Hard Drives for Use
1. With the hard drives inserted and the SATA DOCK powered on, right click on the My
Computer icon and select Manage. In the left pane of the Computer Management
window, click Disk Management.
2. In the bottom right pane of the Computer Management window, you should see
your drives listed as unallocated. Click on the unallocated drive and select New
Partition. The New Partition Wizard will launch.
3. When the New Partition Wizard appears, click Next to continue

Instruction Manual
5
4. Select the partition type you wish to create by clicking on Primary or Extended, as
appropriate. When you have made your selection, click Next to continue.
5. Specify the size of the partition you wish to create. You must select a partition size
that is between the maximum and minimum sizes (typically the maximum disk
space available). Once you have done so, click Next to continue.
6. Select Format this partition with the following settings. Using the drop down
buttons, select the le system, allocation unit size, and volume label you wish to use.
Select Perform a Quick Format and click Next to continue.

Instruction Manual
6
7. A notication window will appear indicating that you have successfully completed
the New Partition Wizard. Click Finish to commence the formatting of the drive.
8. The status of the drive, as shown in the Computer Management window, will be
updated to reect the selections you have made. Please wait while the drive is being
formatted.
9. Once the drive has been successfully partitioned and formatted, it will display as
Healthy.

Instruction Manual
7
10. To access your newly partitioned drive(s), open My Computer. Your drive(s) should
be displayed below the heading Hard Disk Drives.
Specications
SKU
Specication SATADOCK22UE
Internal
Connectors
2x SATA Power
15-pin Female
2x SATA Data
7-Pin Female
External
Connectors
1x USB B Female
2x eSATA Plug Female
1x DC Power Adapter
Drive
Compatibility
2.5/3.5” SATA Hard Drives
OS Support Windows 2000/2003/XP/Vista/7 x64/x86, Mac OS 10.0
and up, Linux
Power Adapter 12V/5V 3.0A