StarTech.com 33FT-8K-HDMI-BOOSTER User manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: June 14, 2023 8:47 AM
Product ID
33FT-8K-HDMI-BOOSTER
Top
Front
Rear
33ft HDMI Signal Booster and Extender - 8K 60Hz
Component Function
1Power LED • Green: HDMI Booster is receiving power
2USB Power Port
• Connect to an available USB Port or USB Wall
Charger
• USB Power is recommended, but not
required for every setup
3HDMI Input Port • Connect to an HDMI Source Device
4HDMI Output Port • Connect to an HDMI Display
Product Information
For the latest drivers/software, technical specications, and declarations of
conformance, please visit: www.StarTech.com/33FT-8K-HDMI-BOOSTER
Requirements
• HDMI Source Device x 1
• HDMI Display Device x 1
• HDMI Cables x 2
Note: It is recommended to use Premium HDMI Cables when connecting Devices to
the HDMI Signal Booster and Extender.
Package Contents
• HDMI Booster x 1
• USB Power Cable x 1
• Quick-Start Guide x 1
1
2 3
4

Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Installation
Installing the HDMI Booster
Note: Power o all Source Devices, Displays, and Peripherals before completing the
following installation steps
1. Connect an HDMI Cable from the HDMI Source Device to the HDMI Input Port,
located on the front of the HDMI Booster.
2. Connect an HDMI Cable from the HDMI Display to the HDMI Output Port, located
on the rear of the HDMI Booster.
3. (Optional) Connect the USB Power Cable from an available USB Port or USB Wall
Charger to the USB Power Port, located on the front HDMI Booster.
4. Power On all of the connected Devices.
Supported Cable Lengths
Max Cable Length
From Source
Max Cable Length
to Display
Total Cable
Length
Maximum
Resolution
4m (13ft) 6m (20ft) 10m (33ft) 8K 60Hz
10m (33ft) 15m (50ft) 25m (83ft) 4K 60Hz
20m (65ft) 25m (82ft) 45m (147ft) 1080p