STEINEL Control Pro IR Quattro MICRO DCS User manual

- 1 -
STEINEL America, Inc.
9051 Lyndale Avenue South
USA - Bloomington, MN 55420
Tel: [phone]
Fax: [phone]
www.steinel.net
US
000000000 09/2013 Technical changes subject to no prior notification.
RUS CN BG LV LT EST HR SLO RO PL SK CZ H TR GR N FIN DK S P E I NL FGB D
STL-7355-16_BDAL_Ultraschall_LiveLink_A6.indd 1 07.11.16 14:40
Information
IR Quattro MICRO DCS
IR Quattro Slim XS DCS
IR Quattro DCS
IR Quattro HD DCS
US Quattro DCS
US Oneway DCS
DT Quattro DCS
US Hallway DCS

IR Quattro MICRO DCS .........................................................................3
IR Quattro SLIM XS DCS ......................................................................15
IR Quattro DCS......................................................................................31
IR Quattro HD DCS ...............................................................................31
USQuattroDCS ....................................................................................49
USOnewayDCS ...................................................................................49
DTQuattroDCS ....................................................................................49
USHallwayDCS....................................................................................49

US
000000000 07/2013 Technische Änderungen vorbehalten.
RU CN BG LV LT EE HR SI RO PL SK CZ HU TR GR NO FI DK SE PT ES IT NL FR GB DE
STL-08740-18_IR_Quattro_MICRO_BDAL_PRO_85x120.indd 1 29.03.18 07:18
Information
IR Quattro MICRO DCS

- 4 -
...

- 5 -
3.1
3.2
2.79 in (71 mm)
ø 1.69 in
(43 mm)

- 6 -
3.3
A
B
4.1
+
-(+)
(-) +
-(+)
(-)
Polarity insensitive
Dataline Dataline
or
or

- 7 -
5.1
~19.6 ft (6 m)
9.1 ft (2.8 m)

- 8 -
5.2
~19.6 ft (6 m)
~13.1 ft (4 m)
5.3
Ø 1.38 in (35 mm)
> 4.72 in (120 mm)

- 9 -
5.4

- 10 -
US
1. Installer
This high-quality product has been
manufactured, tested and packaged
with the assurance of your complete
satisfaction. Please read all of the
instructions before installation.
This will help you to be familiarized
with all the features and options
available to you with these devices.
This will also assist you to minimize
installation time and provide
maximum energy savings and
trouble-free operation.
2. Safety Warnings
!
WARNING
!
• The wiring of this device must
be carried out professionally
and in accordance with all local
and National Electric Codes and
electrical operating conditions.
• Class 2 devices are not suitable
for Class 1 installations.
3. IR Quattro MICRO DCS
Product Description
The IR Quattro MICRO is a PIR
motion detector with compact
size after installation, low overall
height and a micro precision lens
(15 x 15mm). The small 360°
infrared presence puts on a great
performance, covering 36 m². IP65
protection from the front makes
it suitable for rooms exposed to
moisture and sofit. The two wire
polarity insensitive Data Line Input
communicate motion and light level
to the DCS.
Proper use
– Presence detector for indoor
ceiling and sofit mounting.
– Built-in depth at least 4.72 in
(120 mm).
Package contents (Fig.3.1)
Product dimensions (Fig.3.2)
Product components (Fig.3.3)
A Sensor module
B Micro lens
4. Wiring
– The sensor is a polarity insensitive
device. This means it can be
connected to the Data Line
provided by the DCS.
– The sensor is only intended for
concealed, indoor installation in
ceilings and sofit.
Wire labelling:
Red and blue (polarity insensitive).
The lead between the DCS and the
sensor must be no longer than:
– 328ft (100 m): 20AWG
– 492ft (150 m): 18AWG
– 656ft (200 m): 16AWG
– 984ft (300 m): 14AWG
After the sensor is powered on it
flashes for 10s.
Note on parallel connection:
Several sensors can be connected
on the same bus. Check technical
specifications of the DCS for
maximum number of bus participants.

- 11 -
5. Mounting
• Check all components for damage.
• Do not use the product if it is
damaged.
• Select an appropriate mounting
location, taking the reach
and motion detection into
consideration. (Fig. 5.1/5.2)
Mounting procedure
• Drill a hole in the ceiling of max.
Ø1.38in(35mm). (Fig.5.3)
• Connect to the bus powered
data line of the room controller.
(Fig.4.1/5.4)
• Insert the sensor into the
mounting hole. (Fig.5.4)
• Wait for the system to reboot.
• Make settings.
➔"6. Function / Setting"
• After installing the sensor starts
to flash once a second for aprox.
2 minutes. Follow the next steps
on the commissioning App of
the DCS.
6. Function / Setting
The motion detection values and light
levels measured by the sensor can be
requested from the DCS controller App.
LED function
Red LED:
– During installation and Data Line
addressing, LED flashes 1 x per
second.
– After initialization is concluded the
LED will turn o indicating normal
working mode.
– In case of a Data Line bus reset,
the sensor LED will blik indicating
sensor adressing.
7. Maintenance / care
The product requires no
maintenance.
The detector lens may be cleaned
with a damp cloth if it gets dirty (do
not use cleaning agents).
8. Disposal
Electrical and electronic equipment,
accessories and packaging must
be recycled in an environmentally
compatible manner.
Do not dispose of electrical
and electronic equipment
as domestic waste.
9. Warranty
STEINEL America warrants its
products against defects in material
or workmanship for a period of
five years. STEINEL will replace or
repair the item provided that it has
not been altered or subjected to
abuse, accident, improper installation
or improper use. There are no
obligations or liabilities on the part of
STEINEL for consequential damages
arising out of or in connection with
the use or performance of this
product or other indirect damages
with respect to loss of property,
revenue, or profit, or cost of removal,
installation or reinstallation.
MANUFACTURER'S
1
3
5
YEAR
GB
WARRANTY
MANUFACTURER'S
YEAR
WARRANTY
MANUFACTURER'S
YEAR
WARRANTY

- 12 -
10.Technical specifications
Dimensions Ø×D Ø1.69in×2.79in(43×71mm)
Power supply 4 mA/2 Bus participants, 12 - 22.5 VDC , (class 2)
Sensor technology Passive infrared (PIR)
Square detection zone
(Coverage at 2.8 m/9 ft
installation height)
radially 13.1 x 13.1 ft (4 x 4 m)
tangentially 19.6 x 19.6 ft (6 x 6 m)
Angle of coverage 360°
Light measurement 0.2 - 92 fc
Mounting height 6.5 - 16.4 ft (2 - 5 m)
IP rating Environment IP65 rated (Front side)
Temperature range -13°F to +131°F (-25°C to +55°C)
UL UL 2043 Plenum rated
Made in Romania
www.steinel.net

- 13 -
11.Troubleshooting
Malfunction Cause Remedy
Sensor not detecting
motion
■Sensor is not wired
properly to the Da-
ta Line
■In the DCS App check
if the bus connection is
working properly over
the LED blinking func-
tion available on the
sensor settings page
Sensor is wired up
properly but still not
reacting to motion
■Additional sensor set-
tings in the DCS App
need to be checked
and corrected
■Check complete as-
signment of the sen-
sor functionalites for
the itended lighting
zones in the App con-
figuration. Make sure
the sensor is assigned
to the proper zone
and the desired se-
quence of operation is
selected
Sensor sending motion
detection signal when it
should not
■There is interference,
e.g. fan, air condition-
ing system or other
source of heat, in the
detection zone
■Sensor near Wi-Fi or
other wireless commu-
nication source
■Relocate the sensor
■Install at least 6 ft
away from the wire-
less communication
source

000000000 07/2013 Technische Änderungen vorbehalten.
RUS CN BG LV LT EST HR SLO RO PL SK CZ H TR GR N FIN DK S P E I NL F GB D
STL-7384-16_IR QUATTRO SLIM XS_BDAL_A6.indd 1 02.03.17 15:20

- 15 -
000000000 07/2013 Technische Änderungen vorbehalten.
RUS CN BG LV LT EST HR SLO RO PL SK CZ H TR GR N FIN DK S P E I NL F GB D
STL-7384-16_IR QUATTRO SLIM XS_BDAL_A6.indd 1 02.03.17 15:20
IR Quattro SLIM XS DCS
Information
US

- 16 -
...
3

- 17 -
3.1
3.2
3.14 in (80 mm)
1.77 in
(45 mm)
3.14 in (80 mm)
2.00 in
(51 mm)

- 18 -
3.3
C
A
B
D
DA+ DA
-
4.1
+
-(+)
(-)
DA+ DA-
+
-(+)
(-)
Polarity
insensitive
DatalineDataline
or
or

- 19 -
5.1
< 19.6 ft (6 m)
9.1 ft (2.8 m)

- 20 -
5.2
~ 19.6 ft (6 m)
tangential
~13.1 ft (4 m)
radial / presence
5.3
Ø 2.67 in (68 mm)
> 2.24 in (57 mm)