Stern Pinball GAME OF THRONES User manual

GAME OF THRONES
SERVICE AND OPERATION MANUAL
Games congured for North America operate on 60 cycle electricity only. These games will not operate in countries with 50 cycle electricity (Europe UK, Australia).
Stern Pinball machines are assembled in Melrose Park, Illinois, USA; each pinball machine has unique characteristics that make it a one-of-a-kind American-made product.
Each machine will have variations in appearance resulting from differences in the machine’s particular wood parts, individual silk screened art and mechanical assemblies.
Stern Pinball has inspected each game element to insure it meets our quality standards.
WARNING
IMPORTANT HEALTH WARNING: PHOTOSENSITIVE SEIZURES - A very small percentage of people may experience a seizure when exposed to certain visual images, in-
cluding ashing lights or patterns. Even people with no history of seizures of epilepsy may have an undiagnosed condition that can cause “photosensitive epileptic seizures”
due to certain visual images, ashing lights or patterns. Symptoms can include light-headedness, altered vision, eye or face twitching, jerking or shaking of arms or legs,
disorientation, confusion, momentary loss of awareness, and loss of consciousness or convulsions that can lead to injury from falling down or striking nearby objects.
IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU EXPERIENCE ANY OF THESE SYMPTOMS.
1-800-KICKERS - [email protected]
www.sternpinball.com - facebook.com/sternpinball
MANUAL #780-50G4-00
GAME OF THRONES PRO #500-55G4-01
™ & © 2015 Home Box Ofce, Inc.
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

2
GAME OF THRONES PRO MANUAL 500-55G4-01 ™ & © 2015 Home Box Ofce, Inc.
TABLE OF CONTENTS
1. Setup and Moving .................................. 3
1.1 First-Time Setup Instructions ............................... 3
1.2 Adjustments Menu ............................................... 6
1.3 Transporting the Game ........................................ 8
1.4 Maintenance ........................................................ 9
1.5 Maintenance Kits ................................................. 9
1.6 Common Parts ..................................................... 9
2. SPIKE System and Node Guide .......... 10
2.1 SPIKE System Overview .................................... 10
2.2 Node Bus Cabling .............................................. 10
2.3 System Power .................................................... 10
2.4 SPIKE Node Addresses ..................................... 10
2.5 SPIKE Node Programming................................. 10
2.6 SPIKE System Terminology ............................... 11
2.7 Common SPIKE Node Boards ........................... 11
3. Light, Switch, and Driver Reference... 12
3.1 SPIKE Node Boards ........................................... 12
3.2 Driver Reference ................................................ 12
3.3 Switch Reference ............................................... 14
3.4 Light Reference .................................................. 17
4. Electronic Pinouts and Schematics.... 22
4.1 SPIKE CPU Node 0 ............................................ 22
4.2 Node 1 Cabinet .................................................. 24
4.3 Lower Playeld 48V 8-Driver Pinout Node 8 ...... 25
4.4 Mid Playeld 48V 4-Driver Pinout Node 9 ......... 26
4.5 Upper Playeld 48V 4-Driver Pinout Node 10 ... 27
4.6 Serial 16 LED Board 9a ...................................... 28
4.7 Serial 16 LED Board 9b ...................................... 28
4.8 Serial 16 LED Board 10a .................................... 29
4.9 Through Opto Reciever ...................................... 29
4.10 Main Power Supply ............................................ 29
4.11 Power Distribution Board ................................... 30
4.12 Power Plug Wiring.............................................. 30
5. Parts Reference.................................... 31
5.1 Playeld Rubber Parts ....................................... 31
5.2 Rubber Size Chart .............................................. 31
5.3 Playeld Assemblies, Top .................................. 32
5.4 Playeld Assemblies, Bottom ............................ 33
5.5 Backbox Parts.................................................... 34
5.6 Speaker Panel Parts .......................................... 34
5.7 Cabinet Parts ..................................................... 35
5.8 Front Molding Assembly .................................... 36
5.9 Ball Shooter Assembly ....................................... 36
5.10 Ball Trough Assembly......................................... 36
5.11 Flipper Assembly, Left ........................................ 37
5.12 Flipper Assembly, Right ..................................... 37
5.13 Auto Launch Assembly ...................................... 38
5.14 3-Bank Drop Target Assm w/ Right Angle Conn 38
5.15 Kicker Assembly ................................................ 39
5.16 Ball Deector Assembly ..................................... 39
5.17 10pt Switch Assembly ....................................... 39
5.18 S/U Target Assembly .......................................... 39
5.19 Right Ramp Assembly ....................................... 40
5.20 Left Ramp Assembly .......................................... 40
5.21 Pop Bumper Assembly ...................................... 41
5.22 Down Post Actuator ........................................... 42
5.23 Actuator & Fulcrum Assy ................................... 42
5.24 Ram Assembly ................................................... 43
5.25 Assembly, Elec Gat, B.P. MT .............................. 43
5.26 Dragon Solenoid Assem. ................................... 44
5.27 Right Wireform Assembly .................................. 44
5.28 Raptor Toy Assembly ......................................... 44
5.29 Ball Guide Assembly #2 ..................................... 45
5.30 Ball Guide Assembly #3 ..................................... 45
5.31 Throne Assembly ............................................... 45
5.32 Raptor Wing Assembly ...................................... 46
5.33 Dragon Assembly ............................................... 46
5.34 Dragon Pro Assembly ........................................ 46
5.35 Back Panel Assembly ........................................ 47
6. Specications ....................................... 48
6.1 Game Dimensions .............................................. 48
6.2 Warranty ............................................................. 49
6.3 Warnings, Compliance, and Legal Notices ........ 49
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

1. SETUP AND MOVING
2
2
557
7
1
9
8
11
14
15
14
11
8
6
SETUP AND MOVING
3
™ & © 2015 Home Box Ofce, Inc. GAME OF THRONES PRO MANUAL 500-55G4-01
1.1 FIRST-TIME
SETUP INSTRUCTIONS
CAUTION: AT LEAST TWO (2)
PEOPLE ARE REQUIRED TO
MOVE AND MANEUVER THE
GAME. USE PROPER MOVING
EQUIPMENT AND EXTREME
CARE WHILE HANDLING. STERN
PINBALL MACHINES WEIGH
OVER 250LBS BOXED.
TOOLS REQUIRED
• 5/8” Socket Wrench
• Utility Knife
• Snips
• An Assistant
Your brand new Stern Pinball Machine is
carefully packed for safety and security.
For your safety, exercise caution and use
the correct tools and sufcient help when
setting up your new game.
1. Locate the side labeled “TRUCK
THIS SIDE ONLY”. The bottom of
the game faces this side.
2. Open the top box aps by pulling
hard in an upward motion on each
ap. If the aps are taped, cut the
tape rst, taking care to avoid the
box staples.
3. Remove the four (4) foam pieces
and two (2) narrow box tubes
which contain the four (4) identical
legs with levelers.
4. DO NOT CUT STRAPPING YET.
Keep backbox secured in the
down position.
5. With the utility knife, carefully cut
down the left and right corners of
the box.
6. Let the face fall forward and
remove the entire side by carefully
cutting the bottom.
7. With the game still in its folded po-
sition, use a ⅝” wrench to loosen
and remove the 2 leg bolts on each
side of the front cabinet. Ensure
the leg levelers are screwed all the
way in to the legs.
8. Install front legs using the bolts re-
moved from Step 5. Secure tightly.
9. Have someone help you carefully
set the game down on the front
legs.
10. Set aside the open box.
11. With the ⅝” socket wrench, loosen
and remove the 2 leg bolts on
each side of the rear cabinet, 4
total.
12. Using supports or two people,
prop the rear of the cabinet up.
13. Ensure the rear leg levelers are
screwed all the way into the legs.
14. Install rear legs using the 4 bolts
removed from step 11.
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

19
21
17
25
26
27
FIRST-TIME SETUP CONTINUED
27
4
SETUP AND MOVING
GAME OF THRONES PRO MANUAL 500-55G4-01 ™ & © 2015 Home Box Ofce, Inc.
15. Cut nylon strapping and remove
protective strap corner guards.
16. Locate the factory keys, either on
the shooter rod or taped to the
playeld glass.
17. Using snips, cut the tie-wrap secur-
ing the keys if required. One set of
keys is for the front coin door, the
other set of keys is for accessing
components in the backbox.
18. Open the front coin door.
19. Reach into the game and remove
the retaining clip at the rear of the
cash box.
20. Remove the cash box lid by sliding
it toward you.
21. Store the backbox keys, if desired,
on the metal hook located in the
coin door.
22. Locate and remove the pinballs,
plumb bob, and backbox bolts
from the cash box.
23. Replace the cash box lid and
retaining clip for future use.
24. Locate the two (2) backbox bolts in
the cash box.
25. Carefully raise backbox to upright
position while ensuring that cables
are not pinched.
26. Use the ⅝” wrench to Install the
two (2) backbox bolts to secure the
backbox as indicated on the back
of the cabinet.
27. Reach inside the cabinet and lift
the two latches located on either
side of the coin door.
28. Remove the front top molding.
29. Remove the playeld glass by
sliding it toward you and carefully
place it in a safe location.
Remove all playeld shipping
tie downs, shipping blocks, and
packing foam, and follow any
game-specic unpacking instruc-
tions included in the playeld, if
present.
CAUTION: PLAYFIELD GLASS IS MADE FROM HIGH-STRENGTH TEMPERED
GLASS. TEMPERED GLASS IS SENSITIVE TO EXTREME TEMPERATURE SHIFTS
AND CORNER NICKS, WHICH CAN CAUSE THE GLASS TO FAIL CATASTROPHI-
CALLY. TAKE CARE TO STORE THE GLASS ON ON A SOFT, ROOM-TEMPERATURE
SURFACE AND PREVENT THE CORNERS FROM BEING DAMAGED.
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

SETUP AND MOVING
5
™ & © 2015 Home Box Ofce, Inc. GAME OF THRONES PRO MANUAL 500-55G4-01
30. If pinballs were already installed into the lower ball
trough, remove them before lifting the playeld.
31. Grasp the lower arch between the ippers, and rmly
but gently pull directly up to raise the playeld 8 to 12
inches.
32. While holding the playeld up, pull the playeld toward
you until the two playeld supports are over the front
edge of the cabinet.
33. Rest the playeld on the front edge of the cabinet.
34. Raise the playeld and rest it against the backbox.
35. Visually inspect all cabinet cables and connector termi-
nations; ensure no wires or cables are pinched and that
cable harnesses are not pulled tight.
36. Locate the plumb bob in the parts bag in the cash box.
37. Slide plumb bob onto the hanger wire. Note: the vertical
position of the plumb bob affects tilt sensitivity - higher
makes the game more sensitive to tilting.
38. Tighten the Thumb Screw nger-tight.
39. Install the correct number of pinballs. Refer to the decal
on the lock down assembly for the correct number of
pinballs.
LOCATING, LEVELING, AND FINAL SETUP
1. Select a location that is indoors, out of direct sunlight,
and climate controlled. Excessive moisture/humidity
can cause long-term damage to your game.
2. Adjust the front or rear levelers as necessary to position
the playeld level bubble, located on the front right of
the playeld next to the shooter lane, to oat between
the two (2) black lines. This will place the playeld at the
recommended 6.5° pitch. Playeld angles greater than
6.5° can be achieved by turning out the rear leg level-
er(s) for increased difculty and faster gameplay.
3. Use a pinball to roll down the center of the playeld for
side-to-side leveling, or use an external bubble level,
digital level, or smartphone level app.
4. Plug into a grounded outlet and check for proper opera-
tion through DIAGNOSTICS.
5. Check the coin door: With the door closed, insert coins
to verify proper operation.
6. Play game: Check for satisfactory operation and adjust
game volume (push the Red Buttons inside the Coin
Door).
7. If desired, perform any game diagnostics, game adjust-
ments, and pricing settings at this time.
FIRST-TIME SETUP CONTINUED
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

6
SETUP AND MOVING
GAME OF THRONES PRO MANUAL 500-55G4-01 ™ & © 2015 Home Box Ofce, Inc.
1.2 ADJUSTMENTS MENU
STANDARD ADJUSTMENTS
Perform the below steps to review the adjustments.
Enter the Service Menu, then enter the Standard Adjustments
Menu.
Press SELECT. Press BACK to exit or escape at any time.
Press [>]. Go to the ADJ icon. Press SELECT.
Go to the S.P.I. icon. Press SELECT.
STANDARD ADJUSTMENT #1 appears with the adjustment
name ashing. While the adjustment name is ashing press [<]
[>] to move between adjustments.
To change the adjustment setting press SELECT. While the
adjustment setting is ashing, press [<] [>] repeatedly until
the desired setting appears. Press the SELECT button to
“install” the change. The adjustment comment (bottom line) will
indicate if the factory default setting is selected or will display
INSTALLED if the change is not a factory default setting.
ID Adjustment Name Default Setting
1 REPLAY TYPE AUTO
2REPLAY PERCENTAGE 10%
3REPLAY AWARD CREDIT
4 REPLAY LEVELS 1
5 AUTO REPLAY START 20,000,000
6 DYNAMIC REPLAY START 60,000,000
7 REPLAY LEVEL #1 15,000,000
8REPLAY LEVEL #2 30,000,000
9REPLAY LEVEL #3 45,000,000
10 REPLAY LEVEL #4 60,000,000
11 REPLAY BOOST YES
12 SPECIAL LIMIT 1
13 SPECIAL PERCENTAGE 10%
14 SPECIAL AWARD CREDIT
15 FREE GAME LIMIT 5
16 EXTRA BALL LIMIT 5
17 EXTRA BALL PERCENTAGE 25%
18 GAME PRICING USA 11
19 MATCH PERCENTAGE 9%
20 MATCH AWARD CREDIT
21 BALLS PER GAME 3
22 TILT WARNINGS 2
23 CREDIT LIMIT 30
24 ALLOW HIGH SCORES YES
25 HIGH SCORE AWARD CREDIT
26 GRAND CHAMPION AWARDS 1
27 HIGH SCORE #1 AWARDS 1
28 HIGH SCORE #2 AWARDS 0
29 HIGH SCORE #3 AWARDS 0
30 HIGH SCORE #4 AWARDS 0
31 GRAND CHAMPION SCORE 75,000,000
32 HIGH SCORE #1 55,000,000
33 HIGH SCORE #2 40,000,000
ID Adjustment Name Default Setting
34 HIGH SCORE #3 30,000,000
35 HIGH SCORE #4 25,000,000
36 HSTD INITIALS 3 INITIALS
37 HSTD RESET COUNT 2000
38 FREE PLAY NO
39 LANGUAGE ENGLISH
40 PLAYER LANGUAGE SELECT YES
41 CUSTOM MESSAGE ON
42 FLASH LAMP POWER NORMAL
43 COIL PUSLE POWER NORMAL
44 KNOCKER VOLUME NORMAL
45 GAME RESTART YES
46 BILL VALIDATOR NO
47 MUSIC VOLUME 1
48 BALL SAVE TIME 0:05
49 TIMED PLUNGER OFF
50 FLIPPER BALL LAUNCH OFF
51 COINDOOR BALL SAVER NO
52 COMPETITION MODE NO
53 CONSOLATION BALL YES
54 FAST BOOT YES
55 Q24 OPTION COIN METER
56 TICKET DISPENSER NO
57 PLAYER COMPETITION YES
58 TEAM SCORES NO
59 LOCATION ID 0
60 GAME ID 0
61 TIME FORMAT 12-HOUR
62 COIN INPUT DELAY 30
63 LOST BALL RECOVERY YES
64 COIN DOOR DISABLE TILT NO
65 BACKBOX BRIGHTNESS 100%
66 COIN DOOR OPEN B.BOX BRIGHTNESS 10%
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

SETUP AND MOVING
7
™ & © 2015 Home Box Ofce, Inc. GAME OF THRONES PRO MANUAL 500-55G4-01
FEATURE ADJUSTMENTS
Each table has feature adjustments specic to the
characteristics of that game. To access feature adjustments
enter the Service Menu and then enter the Adjustments Menu.
Press SELECT to access the Service Menu. Press BACK to exit
or escape at any time.
Press [>]. Go to the ADJ icon. Press SELECT.
Go to the game icon. Press SELECT.
FEATURE ADJUSTMENT #1 appears with the adjustment name
ashing. With the adjustment name ashing press [<] [>] to
move between adjustments. Feature adjustments are changed
similarly to standard adjustments using the SELECT button
to choose options and the [<] [>] buttons to cycle through
available settings.
SPIKE PINBALL SOFTWARE
UPDATE INSTRUCTIONS
1. Obtain game software update le (lename ends
in “.spk”) from www.sternpinball.com or from
authorized Stern distributor.
2. Place game software update le ( “.spk”) in root
directory of a blank FAT32-formatted USB ash
drive
3. Use backbox power switch to turn off game
4. Plug in USB ash drive to CPU board USB
connector (CN20 or CN21). Refer to www.
sternpinball.com
5. Turn on game
6. The game will automatically begin software
update
7. Select the correct .spk update le from list.
8. Press Enter on the service switches to start
update
9. When the display indicates “Update Complete”,
turn off game
10. Remove USB ash drive from CPU board
11. Turn game on to complete the update and play
pinball!
12. Detailed instructions and troubleshooting tips
are available in the game manual, www.sternpin-
ball.com and authorized Stern distributors.
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

8
SETUP AND MOVING
GAME OF THRONES PRO MANUAL 500-55G4-01 ™ & © 2015 Home Box Ofce, Inc.
1. SECURE THE BACKBOX
1. Ensure that the pinballs are re-
moved from the playeld, and se-
cure any free-moving mechanisms
that may get damaged in transport
2. Remove the backbox securing
bolts
3. Carefully lower the backbox onto
the side rails. Use a piece of card-
board or suitable padding between
the backbox and the game.
4. Securely strap the back box to the
game
5. The game may be transported with
the legs on. If the legs must be re-
moved, follow the remaining steps.
2. REMOVE THE LEGS AND
STAND UP
1.3 TRANSPORTING THE GAME
2
3
4
6. Remove the legs, rear legs rst. Use
a stool or a friend to support the
rear of the game.
7. Rest the rear of the game on the
ground.
6
CAUTION
NEVER TRANSPORT THE GAME
IN A MOVING VEHICLE WITH THE
BACKBOX RAISED! TWO PEOPLE
ARE REQUIRED TO REMOVE THE
LEGS!
10. Secure all loose parts and trans-
port with a hand truck in the
upright position.
8. Stand the game up on its back.
8
9. Remove the front two legs.
9
When transporting the game, such as in the back of a truck or with a hand truck, the
game’s backbox must be secured to prevent damage to the side rails.
TOOLS REQUIRED
• STRAP (500LB OR GREATER)
• AN ASSISTANT
• HAND TRUCK
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

SETUP AND MOVING
9
™ & © 2015 Home Box Ofce, Inc. GAME OF THRONES PRO MANUAL 500-55G4-01
1.4 MAINTENANCE
REGULAR MAINTENANCE - (MONTHLY/500
GAMES)
• Remove the playeld glass
• Enter the software diagnostics menu, start lamp test, then
clean and wax the playeld.
◊ While cleaning the playeld, identify and repair malfunctioning
lights, loose parts, cracked plastics and worn rubber parts.
• While in diagnostics, enter the switch test (Select the "SW"
Icon, then "TEST" Icon).
◊ Use a pinball to actuate all switches and verify the correct
switch registers with the switch test.
◊ The game will play a sound to conrm the switch.
• Lift the playeld and inspect all assemblies for loose parts,
broken wires or excessive wear. Look at the bottom of the
cabinet for any parts that may have worked loose, then nd
the source.
• Check all coin door mechanisms and bill acceptor (if installed)
for proper operation
• Play the game to ensure all coils and features are working
• Check the playeld to ensure it is level and set to the proper
pitch using the bubble level on the right side wood rail.
• Check game audits: Replay % and Ball Time and note abnor-
mal values which can indicate problems.
• Ensure game volume is set appropriately for the location.
• Clean both sides of the playeld glass and reinstall.
• Check and clean pinballs and replace if excessively worn or
scuffed. Dirty pinballs accelerate game wear.
OVERHAUL MAINTENANCE (5000 GAMES)
• Verify latest game software is installed
• Check ippers for excessive wear. Excessive ipper sloppi-
ness (vertical or horizontal) or weakness indicates a ipper
rebuild is required.
• Clean machine inside and out and check leg levelers for free
operation.
• Visual check for loose or broken playeld and cabinet parts
and repair as necessary.
• Electrical check: Plug into grounded outlet and check for
proper operation through DIAGNOSTICS.
• Replace worn or dirty rubbers.
• Replace pinballs.
• Check all playeld switches with a pinball.
• Check all settings (refer to manual for factory settings).
• Check coin door: With door closed, insert coins to verify
proper operation.
• Check for proper adjustment of the plumb bob tilt.
• Play game: Check for satisfactory operation.
COMMON PINBALL TOOLS
• Common nut drivers (¼”, 5/16”, 11/32", ⅜”)
• Phillips screw driver
• Standard Allen wrench/Hex key set
• ⅝” Socket with ratchet
• Adjustable wrench (5/8" & 9/16")
• 6" Torpedo Level (or use a pinball
• Flashlight or headlamp
• Soldering Iron (60w with at tip), lead-free solder
• Wire cutter
• Wire stripper
• Long nose (“needle nose”) pliers
1.5 MAINTENANCE KITS
Description Part Number
Game of Thrones Pro Maintenance Kit
• 8 oz pinball playeld wax (Novus # 2)
(675-0003-01)
• Standard Pinball (260-5000-00)
• Cleaning Cloth
• All Playeld Rubber Rings
• Spare Fuses
502-6002-G4
Game of Thrones Pro Deluxe Maintenance
Kit
• All standard kit items, plus:
• Flipper rebuild kits, Left and Right (500-
6307-10,-00)
502-6003-G4
Game of Thrones Playeld Plastics Kit 803-5000-G4
Game of Thrones Playeld Decals Kit 802-5000-G4
Game of Thrones Pro Backbox Decal Left 820-66G4-01
Game of Thrones Pro Backbox Decal Right 820-66G4-02
Game of Thrones Pro Cabinet Decal Left 820-66G4-03
Game of Thrones Pro Cabinet Decal Right 820-66G4-04
Game of Thrones Pro Cabinet Decal Front 820-66G4-05
Game of Thrones Pro Playeld, Bare 830-5000-G4
Game of Thrones Pro Translite 830-52G4-01
1.6 COMMON PARTS
Description Part Number
8 oz Pinball Playeld wax (Novus # 2) 675-0003-01
Standard Pinball, 1-1/16 in 260-5000-00
Flipper Rebuild Kit Left (Standard) 500-6307-10
Flipper Base Plate Kit Left 515-6617-01
Flipper Rebuild Kit Right 500-6307-00
Flipper Base Plate Kit Right 515-6617-00
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

10
SPIKE SYSTEM AND NODE GUIDE
GAME OF THRONES PRO MANUAL 500-55G4-01 ™ & © 2015 Home Box Ofce, Inc.
2.1 SPIKE SYSTEM OVERVIEW
The SPIKE Pinball system is a rugged, distributed, and em-
bedded platform custom-designed for the rigors of the pinball
machine environment. SPIKE takes advantage of modern tech-
nologies to deliver an immersive pinball experience that supports
modern features, reduces cabling, and increases serviceability
and reliability.
A Stern Pinball machine based on the SPIKE system will have at
least two nodes networked together with the SPIKE node bus,
a custom industrial pinball control bus that is designed around
industry standards and optimized for the pinball environment.
The primary CPU node is networked to one or more input/output
nodes over standard Category 5 UTP (unshielded twisted pair)
ethernet cabling.
There are ve primary types of nodes that are found in the game.
• CPU node (Node 0) - The primary node that controls other
nodes in the system. Contains the primary game software
for the system and provides SPIKE node bus power for other
nodes.
• Cabinet 48V node (Node 1) - Specialized node with specic
inputs and outputs for coin doors, tilt mechanisms, and other
bottom-cabinet devices.
• 48V playeld node - Controls high power devices such
as coils and ashers, and also supports a few switch and
low-power outputs. Powered by the system 48V power
supply.
• Light and switch node - High-density switch and low-power
LED outputs, bus-powered from the node bus. These boards
contain as many 32 switch inputs and light outputs.
• Node extensions - These sub-nodes add additional low-pow-
er input and outputs to a specic Power or I/O node and are
connected with simple serial bus.
2.2 NODE BUS CABLING
The SPIKE node bus utilizes standard Ethernet-style RJ45 8-pin
modular jacks, and off-the-shelf Category 5e or better ethernet
cabling. The node bus is electrically different from Ethernet and
does not not utilize Ethernet or TCP/IP protocols or signaling
standards. SPIKE nodes are not compatible with standard com-
puter networking equipment.
CAUTION: Plugging a SPIKE Node or CPU board into a standard
Ethernet port may damage one or both devices and void your
warranty.
2.3 SYSTEM POWER
The SPIKE System is powered from an 48V DC power supply
bus. Each SPIKE node converts this voltage to lower voltages
required by the node and its specic components. A SPIKE 48V
node typically controls high-power outputs such as game coil
mechanisms and high-brightness LEDs. These powered nodes
are supplied directly with 48V system power. SPIKE standard I/O
nodes are low-power nodes that read switch inputs and output
to standard-brightness LEDs. Standard I/O nodes use the node
bus power, which is supplied by the main CPU node over the
node bus modular jack connectors.
COIN-DOOR SAFETY INTERLOCK
To protect the system and for user safety, power to the playeld
is disabled when the front coin door is opened. 48V system pow-
er and 9V node bus power is disabled to all playeld components
until the switch is closed.
2.4 SPIKE NODE ADDRESSES
Each SPIKE node has a unique address ranging from 0 to 15. Not
all addresses are used in all games. Nodes can be of the same
part number, so the address is specied on the DIP switches on
each node. When replacing a node, be certain that the correct
address is set. Nodes can have 3-position and 4-position DIP
switches. Refer to the appropriate table to set the address for
each type of Node. The correct address for a node can be found
in the SPIKE node reference section of the manual or in the game
diagnostic software. Address 0 is reserved for the backbox CPU
node, where the game software resides. Address 1 is reserved for
the cabinet node, located inside the coin door. These two nodes
do not have DIP switches as their address is not congurable.
Address 1 2 3
8OFF OFF OFF
9OFF OFF ON
10 OFF ON OFF
11 OFF ON ON
12 ON OFF OFF
13 ON OFF ON
14 ON ON OFF
15 ON ON ON
Figure 2.4.1. SPIKE node addresses for nodes with 3-position DIP
switches. Addresses 0-7 are not used by SPIKE nodes with 3-posi-
tion DIP switches.
Address 1 2 3 4
8OFF OFF OFF OFF
9OFF OFF ON OFF
10 OFF ON OFF OFF
11 OFF ON ON OFF
12 ON OFF OFF OFF
13 ON OFF ON OFF
14 ON ON OFF OFF
15 ON ON ON OFF
Figure 2.4.2. SPIKE node addresses for nodes with 4-position DIP
switches. Addresses 0-7 are reserved for xed-function nodes and
do not require conguration.
2.5 SPIKE NODE PROGRAMMING
The SPIKE nodes are smart nodes that have on-board pro-
cessors and run embedded code. The nodes are programmed
2. SPIKE SYSTEM AND NODE GUIDE
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

SPIKE SYSTEM AND NODE GUIDE
11
™ & © 2015 Home Box Ofce, Inc. GAME OF THRONES PRO MANUAL 500-55G4-01
automatically by the CPU node whenever software updates are
installed to the CPU. When replacing a node, the CPU node will
detect and update the node to the latest software with no user
intervention. Always replace nodes with the power to the game
turned OFF.
2.6 SPIKE SYSTEM TERMINOLOGY
MULTI GENERAL ILLUMINATION LIGHTING
General Illumination Lighting is two or more lights powered by
one control source. These are often a number of LEDs connect-
ed in parallel and the system controls these as one large LED. A
missing LED will not affect these circuits, however a shorted LED
can cause the entire string of LEDs to turn off.
SINGLE LIGHTS
Single lights and LEDs are direct-controlled from SPIKE node
boards. A common power source is grounded by individual
transistors to turn individual LEDs on and off. Groups of LEDs,
usually by node connector, share a common power source, so if
a group of LEDs is out, check the wiring for the power source.
FLASHERS
SPIKE games treat ashers the same as single LEDs that draw
more power. Flashers are controlled from the same circuits that
power regular lights.
DRIVERS
A driver is a circuit that controls a high power-device such as a
coil, magnet, or motor. Each device has a common 48V power
source that is then connected to ground by a dedicated control
transistor. Each driver is protected against shorting, static elec-
tricity, and over-current conditions. Take caution as 48V is always
present on a device even when it is not energized.
OPTOS
Certain types of optical switches (“optos”) require external signal
conditioning. For these optos, they will interface to a SPIKE node
via an opto signal conditioning board. Other optical switches
connect directly to the Spike node board.
System Protections
CAUTION: Unless explicitly directed by an Authorized Stern Re-
pair technician, perform ALL work on your pinball machine with
the power disabled!
INPUT/OUTPUT PROTECTIONS
SPIKE features built-in short-circuit, static electricity, and other
protections to maximize reliability. If an LED, coil or other device
shorts, it will be disabled but will not shut down the entire system
in most circumstances. Groups of LEDs, coils, and switches often
share common power supplies or other circuits, so it is possible
that a bad device will affect the group of related devices and
require removal or repair to x the group. The system diagnostics
will inform the technician of shorted or otherwise malfunctioning
devices whenever possible. While the system is protected against
permanent damage, it is strongly recommended to repair or
replace these bad components as soon as possible to minimize
downtime and maximize game earnings.
FUSES
Nodes that have 48 V power are fused individually. Fuse voltage
ratings are a safety rating and always must be higher than the
circuit the fuse is protecting. Never replace a fuse with a lower
voltage-rated fuse. Fuse current ratings must be replaced with
the same current value. A higher current value fuse could cause
catastrophic failures, and a lower-value fuse will cause premature
fuse failures.
Common fuses
Fuse Rating (Amps) Type Part Number
3 A Slow Blow MDL 200-5000-08
4 A Slow Blow MDL 200-5000-06
5 A Slow Blow MDL 200-5000-01
7 A Slow Blow MDL 200-5000-03
8 A Slow Blow MDL 200-5000-05
CAUTION: Always replace fuses with the exact current specica-
tions.
2.7 COMMON SPIKE NODE BOARDS
Description Type Part Number
SPIKE CPU Node Node 520-6936-01
SPIKE CPU Node w/ Video Out Support (Back-
ward compatible with -00) Node 520-6936-10
Cabinet Node Node 520-6967-00
48V 8-Driver Node Node 520-6935-10
48V 4-Driver Node Node 520-5329-10
SPIKE 32 Light and Switch Node Node 520-5322-10
Through Serial Opto Receiver Extension Extension 520-5345-01
SPIKE SYSTEM AND NODE GUIDE CONTINUED
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

12
LIGHT, SWITCH, AND DRIVER REFERENCE
GAME OF THRONES PRO MANUAL 500-55G4-01 ™ & © 2015 Home Box Ofce, Inc.
3. LIGHT, SWITCH, AND DRIVER REFERENCE
3.1 SPIKE NODE BOARDS
755-7512-G4 ™ & © 2015 Home Box Office, Inc.
When replacing node boards,
ensure DIP address switches
are set correctly! PLAYFIELD REAR
PLAYFIELD FRONT
Node Bus Cable (RJ45)
Serial Data Cable
NODE BOARD ID INSTRUCTION SHEET
BACKBOX
CPU NODE 0
D30D29D28 D13
SDA
RST
GND
SCL
RESET
CN18
LINE
OUT
TxD
NETSTAT
STATUS
RxD
5V 48V
24V
9V
S1
+48V
CN23
11
CN20
POWER
HEADPHONE
CN25
IN
L+ L-
C+ C- R+ R-
CN21
CN7
CN3 CN22
CN4 CN1
CN24
520-6936-01
SPIKE CPU
11
1
1
BT1
AMPLIFIED AUDIO
OUT
SPIKE NODE BUS
USB
SD CARD
BATTERY
DIP S2
CN22
CN2
CN3
NODE 9
NODE 10a
NODE 8
CN3
NODE 0
NODE 10
CN14
CN14
CN1
CN4
CN14
NODE 8a
NODE 9b
CN4
CN4
CN2
CN3
NODE 9a
CABINET
CABINET NODE 1
CN13
CN3
CN3
ID DIP Address Description Location Part Number
Node 0 n/a SPIKE CPU Node Backbox 520-6936-01
Node 1 n/a Cabinet Node Cabinet 520-6967-00
Node 8 OFF-OFF-OFF-OFF Lower Playeld 48V 8-Driver Node Lower playeld 520-6935-10
8a n/a Trough Serial Opto Receiver Extension Lower playeld (ball trough) 520-5345-01
Node 9 OFF-OFF-ON Playeld 48V 4-Driver Node Playeld 520-5329-10
9a n/a Serial 16 LED board Playeld 520-6831-01
9b n/a Serial 16 LED board Playeld 520-6831-01
Node 10 OFF-ON-OFF Playeld 48V 4-Driver Node Playeld 520-5329-10
10a n/a Serial 16 LED board Playeld 520-6831-01
PRO
Continued on next page...
3.2 DRIVER REFERENCE
ID DIP Address Description Location Part Number
Node 0 n/a SPIKE CPU Node Backbox 520-6936-01
Node 1 n/a Cabinet Node Cabinet 520-6967-00
Node 8 OFF-OFF-OFF-OFF Lower Playeld 48V 8-Driver Node Lower playeld 520-6935-10
8a n/a Trough Serial Opto Receiver Extension Lower playeld ball trough 520-5345-01
Node 9 OFF-OFF-ON Playeld 48V 4-Driver Node playeld 520-5329-10
9a n/a Serial 16 LED board playeld 520-6831-01
9b n/a Serial 16 LED board playeld 520-6831-01
Node 10 OFF-ON-OFF Playeld 48V 4-Driver Node playeld 520-5329-10
10a n/a Serial 16 LED board playeld 520-6831-01
n/a Power Supply Backbox 011-5001-00
n/a Power Distribution Board Backbox 520-5343-01
n/a
n/a
ID Name Node Connector Ret. Pin Ret. Wire Voltage V+ Pin V+ Color Location Type Address Part Number
1 Trough 9CN9 3ORG GRY 48V 4 GRY RED Playeld Coil - 27-1500 9-DR-2 090-5004-ND
2Auto Plunger 9CN7 3ORG WHT 48V 4 GRY RED Playeld Coil - 23-800 9-DR-1 090-5001-ND
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

LIGHT, SWITCH, AND DRIVER REFERENCE
13
™ & © 2015 Home Box Ofce, Inc. GAME OF THRONES PRO MANUAL 500-55G4-01
Figure 3.2.1. Playeld driver locations (top view).
DRIVER REFERENCE
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

14
LIGHT, SWITCH, AND DRIVER REFERENCE
GAME OF THRONES PRO MANUAL 500-55G4-01 ™ & © 2015 Home Box Ofce, Inc.
3.3 SWITCH REFERENCE
Continued on next page...
DRIVER REFERENCE CONTINUED
ID Name Node Connector Ret. Pin Ret. Wire Voltage V+ Pin V+ Color Location Type Address Part Number
3Left Flipper Power 8CN5 3ORG YEL 48V 4 GRY ORG Playeld Coil - 22-1080 8-DR-0 090-5032-ND
4
5 Left Slingshot 8CN7 3ORG BLU 48V 4 GRY ORG Playeld Coil - 26-1200 8-DR-1 090-5044-ND
6
7 Shaker Motor 1 CN2 1 BLU 48V 5 RED Cabinet Motor 1-DR-0 041-5029-04
8Right Flipper
Power
8CN8 5 ORG GRN 48V 6 GRY ORG Playeld Coil - 22-1080 8-DR-5 090-5032-ND
9Right Slingshot 8CN6 5 ORG VIO 48V 6 GRY ORG Playeld Coil - 26-1200 8-DR-4 090-5044-ND
10 Left Pop Bumper 10 CN7 3ORG BLK 48V 4 GRY BRN Playeld Coil - 26-1200 10-DR-1 090-5044-ND
11 Right Pop Bumper 10 CN9 3ORG BRN 48V 4 GRY BRN Playeld Coil - 26-1200 10-DR-2 090-5044-ND
12 Bottom Pop
Bumper
10 CN11 3ORG RED 48V 4 GRY BRN Playeld Coil - 26-1200 10-DR-3 090-5044-ND
13
14 3-Bank Drop
Reset
8CN9 3BLU BLK 48V 4 GRY ORG Playeld Coil - 25-1240 8-DR-2 090-5034-ND
15
16 Up-Post 8CN12 5 YEL BRN 48V 6 GRY ORG Playeld Coil - 26-1200 8-DR-7 090-5044-ND
17 Kickback 8CN11 3BLU BRN 48V 4 GRY ORG Playeld Coil - 23-800 8-DR-3 090-5001-ND
18 Dragon 8CN10 5 YEL BLK 48V 6 GRY ORG Playeld Coil - 23-800 8-DR-6 090-5001-ND
19
20 Lock Release Post 9CN11 3BLU GRN 48V 4 GRY RED Playeld Coil - 26-1200 9-DR-3 090-5044-ND
21 Sword 9CN5 3BLU YEL 48V 4 GRY RED Playeld Coil - 26-1200 9-DR-0 090-5044-ND
22 L/R Control Gates 10 CN5 3BLU RED 48V 4 GRY BRN Back Panel Coil - 32-1250 10-DR-0 090-5060-01-
ND
23
24
25
26
27
28
29
30 Ticket Meter 1 CN3 2BLK 12V 1 RED Cabinet Digital Out 1-DR-2 500-9946-00
31 Coin Meter 1 CN4 2BLK 12V 1 RED Cabinet Digital Out 1-DR-3 500-9946-00
32 Ticket Enable 1 CN11 312V 1 Cabinet Digital Out 1-DR-4
ID Name Node Node
Ext
Conn. Input
Pin
Input Wire GND Pin Ground Wire Location Type Address Part Number
1 Left Return Lane 9- CN15 3PNK BRN 14 BLK VIO Playeld Rollover 9-SW-5 500-9935-03
2Right Return Lane 8- CN10 4 PNK RED 3BLK GRN Playeld Rollover 8-SW-6 500-9935-04
3Left Outlane 9- CN15 2PNK BLK 14 BLK VIO Playeld Rollover 9-SW-4 500-9935-04
4 Right Outlane 8- CN12 4 PNK ORG 3BLK GRN Playeld Rollover 8-SW-7 500-9935-04
5 Left Slingshot 8- CN7 2GRY BLU 1 BLK GRN Playeld Leaf 8-SW-1 180-5231-00
6 Right Slingshot 8- CN6 4 GRY VIO 3BLK GRN Playeld Leaf 8-SW-4 180-5231-00
7 3-Bank Drop Tgt Top 9- CN15 11 WHT BRN 14 BLK VIO Playeld Opto 9-SW-13 520-5252-13
83-Bank Drop Tgt Mid 9- CN15 12 WHT RED 14 BLK VIO Playeld Opto 9-SW-14 520-5252-13
93-Bank Drop Tgt Btm 9- CN15 13 WHT ORG 14 BLK VIO Playeld Opto 9-SW-15 520-5252-13
10 L Flipper Button 8- CN9 2GRY BRN 1 BLK GRN Cabinet Leaf 8-SW-2 180-5164-01
11 R Flipper Button 8- CN11 2GRY RED 1 BLK GRN Cabinet Leaf 8-SW-3 180-5164-01
12
13
14
15
16 Left Flipper EOS 8- CN5 2GRY YEL 1 BLK GRN Playeld Leaf 8-SW-0 180-5149-00
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

LIGHT, SWITCH, AND DRIVER REFERENCE
15
™ & © 2015 Home Box Ofce, Inc. GAME OF THRONES PRO MANUAL 500-55G4-01
SWITCH REFERENCE CONTINUED
ID Name Node Node
Ext
Conn. Input
Pin
Input Wire GND Pin Ground Wire Location Type Address Part Number
17 Right Flipper EOS 8- CN8 4 GRY GRN 3BLK GRN Playeld Leaf 8-SW-5 180-5149-00
18
19
20 Trough 6 8 8a CN14 - -Playeld Opto 8a-SW-9 520-5344-00 tx
520-5345-01 rx
21 Trough 5 8 8a CN14 - -Playeld Opto 8a-SW-10 520-5344-00 tx
520-5345-01 rx
22 Trough 4 8 8a CN14 - -Playeld Opto 8a-SW-11 520-5344-00 tx
520-5345-01 rx
23 Trough 3 8 8a CN14 - -Playeld Opto 8a-SW-12 520-5344-00 tx
520-5345-01 rx
24 Trough 2 8 8a CN14 - -Playeld Opto 8a-SW-13 520-5344-00 tx
520-5345-01 rx
25 Trough 1 8 8a CN14 - -Playeld Opto 8a-SW-14 520-5344-00 tx
520-5345-01 rx
26 Trough Jam 8 8a CN14 - -Playeld Opto 8a-SW-15 520-5344-00 tx
520-5345-01 rx
27 Shooter Lane 9- CN7 2LGN YEL 1 BLK VIO Playeld Rollover 9-SW-1 180-5157-01
28
29 Left Spinner 10 - CN15 5 WHT YEL 14 BLK BRN Playeld Micro 10-SW-7 180-5010-02
30 Left Loop 10 - CN15 8WHT VIO 14 BLK BRN Playeld Rollover 10-SW-10 500-9935-03
31 Right Loop 10 - CN15 9WHT GRY 14 BLK BRN Playeld Rollover 10-SW-11 500-9935-03
32 Target 1 10 - CN15 6 WHT GRN 14 BLK BRN Playeld Leaf,
Target
10-SW-8 515-9785-00-00
33 Target 2 10 - CN15 7 WHT BLU 14 BLK BRN Playeld Leaf,
Target
10-SW-9 515-9785-00-00
34 Target 3 10 - CN5 2PNK YEL 1 BLK BRN Playeld Leaf,
Target
10-SW-0 515-9785-00-00
35 Target 4 9- CN15 6 PNK GRN 14 BLK VIO Playeld Leaf,
Target
9-SW-8 515-9785-00-00
36 Target 5 9- CN15 7 PNK BLU 14 BLK VIO Playeld Leaf,
Target
9-SW-9 515-9785-00-00
37 Kickback 10 - CN15 12 LGN BRN 14 BLK BRN Playeld Opto 10-SW-14 515-0215-00 tx
515-0215-01 rx
38 Left Ramp Entrance 10 - CN15 3TAN YEL 14 BLK BRN Playeld Opto 10-SW-5 515-0215-00 tx
515-0215-01 rx
39 Left Ramp Exit 10 - CN15 4 TAN GRN 14 BLK BRN Playeld Opto 10-SW-6 515-0215-00 tx
515-0215-01 rx
40 Battering Ram 10 - CN15 2TAN ORG 14 BLK BRN Playeld Rollover 10-SW-4 515-9836-00
41 Right Ramp Entrance 9- CN15 5 TAN BLU 14 BLK VIO Playeld Opto 9-SW-7 515-0215-00 tx
515-0215-01 rx
42 Right Ramp Exit 10 - CN15 13 LGN RED 14 BLK BRN Playeld Opto 10-SW-15 515-0215-00 tx
515-0215-01 rx
43 Right 2-Bank Top 9- CN15 8PNK VIO 14 BLK VIO Playeld Leaf,
Target
9-SW-10 515-9784-00-00
44 Right 2-Bank Bottom 9- CN15 9PNK GRY 14 BLK VIO Playeld Leaf,
Target
9-SW-11 515-9784-00-00
45 10 Points 9- CN15 10 PNK WHT 14 BLK VIO Playeld Leaf,
Target
9-SW-12 180-5231-00
46 Lock 1 9- CN5 2LGN ORG 1 BLK VIO Playeld Rollover 9-SW-0 180-5119-02
47 Lock 2 9- CN9 2LGN BLU 1 BLK VIO Playeld Rollover 9-SW-2 180-5119-02
48 Lock 3 9- CN11 2LGN VIO 1 BLK VIO Playeld Rollover 9-SW-3 180-5119-02
49
50 Left Pop Bumper 10 - CN7 2TAN BLK 1 BLK BRN Playeld Leaf 10-SW-1 180-5232-00
51 Right Pop Bumper 10 - CN9 2TAN 1 BLK BRN Playeld Leaf 10-SW-2 180-5232-00
52 Bottom Pop Bumper 10 - CN11 2TAN RED 1 BLK BRN Playeld Leaf 10-SW-3 180-5232-00
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

16
LIGHT, SWITCH, AND DRIVER REFERENCE
GAME OF THRONES PRO MANUAL 500-55G4-01 ™ & © 2015 Home Box Ofce, Inc.
SWITCH REFERENCE CONTINUED
Continued on next page...
Figure 3.3.1. Playeld switch locations (top view).
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

LIGHT, SWITCH, AND DRIVER REFERENCE
17
™ & © 2015 Home Box Ofce, Inc. GAME OF THRONES PRO MANUAL 500-55G4-01
SWITCH REFERENCE CONTINUED
Continued on next page...
3.4 LIGHT REFERENCE
ID Name Node Node
Ext
Conn. Input
Pin
Input Wire GND Pin Ground Wire Location Type Address Part Number
53 Left Top Lane 10 - CN15 10 WHT 14 BLK BRN Playeld Rollover 10-SW-12 500-9935-03
54 Right Top Lane 10 - CN15 11 LGN BLK 14 BLK BRN Playeld Rollover 10-SW-13 500-9935-03
55
56
57
58
59
60 Lockdown 1 - CN7 8TAN WHT 5 BLK WHT Cabinet Leaf 1-SW-2
61
62
63 Start Button 1 - CN6 10 GRY 5 BLK WHT Cabinet Micro 1-SW-11 180-5174-00
64 Tournament Start 1 - CN6 9GRY WHT 5 BLK WHT Cabinet Micro 1-SW-12 180-5174-00
65
66 Left Coin 1 - CN5 9PNK BRN 3BLK Cabinet Micro 1-SW-16
67 Right Coin 1 - CN5 8PNK RED 3BLK Cabinet Micro 1-SW-18
68 Center Coin 1 - CN5 7 PNK ORG 3BLK Cabinet Micro 1-SW-17
69 Fourth Coin 1 - CN5 6 -Cabinet - 1-SW-19
70 Fifth Coin 1 - CN5 5 -Cabinet - 1-SW-20
71 Tilt Pendulum 1 - CN6 7 WHT 5 BLK WHT Cabinet Plumb
Bob
1-SW-14
72 -
74 Ticket Notch 1 - CN11 5 -Cabinet - 1-SW-8
75 Slam Tilt 1 - CN5 4 LGN RED 3BLK Cabinet - 1-SW-21
76
77
C1 DIP 1 0 - - - -CPU Node 0-SW-0 -
C10 Service Plus 0 - CN25 3LGN VIO 6 BLK Coin Door 0-SW-10 180-5192-02
C11 Service Minus 0 - CN25 2LGN BLU 6 BLK Coin Door 0-SW-11 180-5192-02
C12 Service Back 0 - CN25 1 LGN BLK 6 BLK Coin Door 0-SW-12 180-5192-00
C16 DC Sense 0 - CN7 4 GRY RED 1 BLK Cabinet - 0-SW-16 -
C2 DIP 2 0 - - - -CPU Node 0-SW-2 -
C3 DIP 3 0 - - - -CPU Node 0-SW-3 -
C4 DIP 4 0 - - - -CPU Node 0-SW-4 -
C5 DIP 5 0 - - - -CPU Node 0-SW-5 -
C6 DIP 6 0 - - - -CPU Node 0-SW-6 -
C7 DIP 7 0 - - - -CPU Node 0-SW-7 -
C8 DIP 8 0 - - - -CPU Node 0-SW-8 -
C9 Service Select 0 - CN25 4 LGN GRY 6 BLK Coin Door 0-SW-9 180-5192-04
ID Name Node Node
Ext.
Conn. Ret.
Pin
Ret. Wire Src.
Pin
Src. Wire Location Type Light
Color
Address Part Number
1 Coin Enable 1 - CN8 6 BLK GRY 2GRY RED Coin Door Digital Out 1-LP-0
2Start Button 1 - CN6 3YEL BRN 1 RED Cabinet Feature White 1-LP-2 112-5033-08
3Tournament Start 1 - CN6 2YEL RED 1 RED Cabinet Feature White 1-LP-3 112-5033-08
4 Lockdown-R 1 - CN7 2RED WHT 1 RED Cabinet Feature RGB 1-LP-5 520-5333-00
5 Lockdown-G 1 - CN7 3GRN WHT 1 RED Cabinet Feature RGB 1-LP-4 520-5333-00
6 Lockdown-B 1 - CN7 4 BLU WHT 1 RED Cabinet Feature RGB 1-LP-7 520-5333-00
7
8
9
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

18
LIGHT, SWITCH, AND DRIVER REFERENCE
GAME OF THRONES PRO MANUAL 500-55G4-01 ™ & © 2015 Home Box Ofce, Inc.
LIGHT REFERENCE CONTINUED
Continued on next page
ID Name Node Node
Ext.
Conn. Ret.
Pin
Ret. Wire Src.
Pin
Src. Wire Location Type Light
Color
Address Part Number
10
11 Left Outlane 99b CN2 7 ORG BLK 8/9 RED Playeld Feature White 9-LP-32 520-5307-00
12 Left Return Lane 99b CN2 6 ORG BRN 8/9 RED Playeld Feature White 9-LP-33 520-5307-00
13 Left 3-Bank (Bot.) 99b CN2 5 ORG RED 8/9 RED Playeld Feature White 9-LP-34 520-5307-00
14 Left 3-Bank (Mid.) 99b CN2 4 ORG YEL 8/9 RED Playeld Feature White 9-LP-35 520-5307-00
15 Left 3-Bank (Top) 99b CN2 3ORG GRN 8/9 RED Playeld Feature White 9-LP-36 520-5307-00
16 Left 3-Bank Sigil-R 99b CN1 6 RED BRN 11 RED Playeld Feature RGB 9-LP-42 520-5333-00
17 Left 3-Bank Sigil-G 99b CN1 5 GRN BRN 11 RED Playeld Feature RGB 9-LP-43 520-5333-00
18 Left 3-Bank Sigil-B 99b CN1 4 BLU BRN 11 RED Playeld Feature RGB 9-LP-44 520-5333-00
19 Hand of the King 9- CN16 2BRN BLK 1 YEL Playeld Feature White 9-LP-1 520-5307-00
20 Targaryen Sigil 9- CN16 3BRN 1 YEL Playeld Feature White 9-LP-2 520-5307-00
21 Iron Throne 9- CN16 4 BRN RED 1 YEL Playeld Feature White 9-LP-3 520-5307-00
22 Stark Sigil 9- CN16 5 BRN VIO 1 YEL Playeld Feature White 9-LP-4 520-5307-00
23 Baratheon Sigil 9- CN16 6 BRN GRY 1 YEL Playeld Feature White 9-LP-5 520-5307-00
24 Lannister Sigil 9- CN16 7 BRN WHT 1 YEL Playeld Feature White 9-LP-6 520-5307-00
25 Greyjoy Sigil 9- CN16 8YEL BLK 1 YEL Playeld Feature White 9-LP-7 520-5307-00
26 Tyrell Sigil 9- CN16 9YEL BRN 1 YEL Playeld Feature White 9-LP-8 520-5307-00
27 Martell Sigil 9- CN16 10 YEL RED 1 YEL Playeld Feature White 9-LP-9 520-5307-00
28 2x 9- CN16 11 YEL ORG 1 YEL Playeld Feature White 9-LP-10 520-5307-00
29 3x 9- CN16 12 YEL GRN 1 YEL Playeld Feature White 9-LP-11 520-5307-00
30 4x 9- CN16 13 YEL BLU 1 YEL Playeld Feature White 9-LP-12 520-5307-00
31 5x 9- CN16 14 YEL VIO 1 YEL Playeld Feature White 9-LP-13 520-5307-00
32 Shoot Again 8- CN12 1 YEL GRY 2YEL Playeld Feature White 8-LP-3 520-5307-00
33 Right Return Lane 8- CN6 1 BRN ORG 2YEL Playeld Feature White 8-LP-0 520-5307-00
34 Right Outlane 8- CN8 1 BRN YEL 2YEL Playeld Feature White 8-LP-1 520-5307-00
35 Right 2-Bank Sigil-R 9 9a CN1 3RED GRY 10 RED Playeld Feature RGB 9-LP-29 520-5333-00
36 Right 2-Bank Sigil-G 9 9a CN1 2GRN GRY 10 RED Playeld Feature RGB 9-LP-30 520-5333-00
37 Right 2-Bank Sigil-B 9 9a CN1 1 BLU GRY 10 RED Playeld Feature RGB 9-LP-31 520-5333-00
38 Right 2-Bank (Top) 9 9a CN2 2ORG BLU 8RED Playeld Feature White 9-LP-21 520-5307-00
39 Right 2-Bank (Bot.) 9 9a CN2 1 ORG VIO 8RED Playeld Feature White 9-LP-22 520-5307-00
40 Left Loop Sigil-R 10 - CN16 10 RED ORG 1 YEL Playeld Feature RGB 10-LP-9 520-5333-00
41 Left Loop Sigil-G 10 - CN16 11 GRN ORG 1 YEL Playeld Feature RGB 10-LP-10 520-5333-00
42 Left Loop Sigil-B 10 - CN16 12 BLU ORG 1 YEL Playeld Feature RGB 10-LP-11 520-5333-00
43 Left Loop Arrow 10 - CN16 13 ORG BLU 1 YEL Playeld Feature White 10-LP-12 520-5307-00
44 Standup Target #1 (L) 99b CN2 2ORG BLU 8/9 RED Playeld Feature White 9-LP-37 520-5307-00
45 Kickback Lane Ar-
row-Clr
99b CN1 9YEL BLK 12 RED Playeld Feature White 9-LP-39 520-5307-00
46 Kickback Lane Ar-
row-Amb
99b CN1 8YEL BRN 12 RED Playeld Feature White 9-LP-40 520-5307-00
47 Kickback Lane Sigil-R 99b CN1 3RED YEL 10 RED Playeld Feature RGB 9-LP-45 520-5333-00
48 Kickback Lane Sigil-G 99b CN1 2GRN YEL 10 RED Playeld Feature RGB 9-LP-46 520-5333-00
49 Kickback Lane Sigil-B 99b CN1 1 BLU YEL 10 RED Playeld Feature RGB 9-LP-47 520-5333-00
50 Kickback Lane Ar-
row-Red
99b CN1 7 YEL RED 12 RED Playeld Feature White 9-LP-41 520-5307-00
51 Dragon Fire 10 10a CN1 3BRN 10 RED Playeld Feature Red 10-LP-29 112-5049-02
52 Standup Target #2 99b CN2 1 ORG WHT 8/9 RED Playeld Feature White 9-LP-38 520-5307-00
53 Left Ramp Arrow-Clr 10 10a CN2 7 BRN BLK 8/9 RED Playeld Feature White 10-LP-16 520-5307-00
54 Left Ramp Lock-Grn 10 10a CN2 6 BRN 8/9 RED Playeld Feature White 10-LP-17 520-5307-00
55 Left Ramp Sigil-R 10 10a CN1 9RED GRN 12 RED Playeld Feature RGB 10-LP-23 520-5333-00
56 Left Ramp Sigil-G 10 10a CN1 8GRN 12 RED Playeld Feature RGB 10-LP-24 520-5333-00
57 Left Ramp Sigil-B 10 10a CN1 7 BLU GRN 12 RED Playeld Feature RGB 10-LP-25 520-5333-00
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

LIGHT, SWITCH, AND DRIVER REFERENCE
19
™ & © 2015 Home Box Ofce, Inc. GAME OF THRONES PRO MANUAL 500-55G4-01
LIGHT REFERENCE CONTINUED
Continued on next page
Figure 3.4.1. Playeld light locations (top view).
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]

20
LIGHT, SWITCH, AND DRIVER REFERENCE
GAME OF THRONES PRO MANUAL 500-55G4-01 ™ & © 2015 Home Box Ofce, Inc.
LIGHT REFERENCE CONTINUED
Continued on next page...
ID Name Node Node
Ext.
Conn. Ret.
Pin
Ret. Wire Src.
Pin
Src. Wire Location Type Light
Color
Address Part Number
58 Left Ramp Arrow-Red 10 10a CN2 5 BRN RED 8/9 RED Playeld Feature White 10-LP-18 520-5307-00
59 Standup Target #3 10 10a CN1 4 BRN WHT 11 RED Playeld Feature White 10-LP-28 520-5307-00
60 Battering Ram 3-Bot 10 10a CN2 4 BRN ORG 8/9 RED Playeld Feature White 10-LP-19 520-5307-00
61 Battering Ram 2-Mid 10 10a CN2 3BRN YEL 8/9 RED Playeld Feature White 10-LP-20 520-5307-00
62 Battering Ram 1-Top 10 10a CN2 2BRN GRN 8/9 RED Playeld Feature White 10-LP-21 520-5307-00
63 Battering Ram Arrow 10 10a CN2 1 BRN BLU 8/9 RED Playeld Feature White 10-LP-22 520-5307-00
64 Standup Target #4 9 9a CN2 7 ORG BLK 9RED Playeld Feature White 9-LP-16 520-5307-00
65 Right Ramp Arrow-Yel 9 9a CN2 6 ORG BRN 9RED Playeld Feature White 9-LP-17 520-5307-00
66 Right Ramp Sigil-R 9 9a CN1 9RED BLU 12 RED Playeld Feature RGB 9-LP-23 520-5333-00
67 Right Ramp Sigil-G 9 9a CN1 8GRN BLU 12 RED Playeld Feature RGB 9-LP-24 520-5333-00
68 Right Ramp Sigil-B 9 9a CN1 7 BLU 12 RED Playeld Feature RGB 9-LP-25 520-5333-00
69 Right Ramp Arrow-Red 9 9a CN2 5 ORG RED 9RED Playeld Feature White 9-LP-18 520-5307-00
70 Standup Target #5 (R) 9 9a CN2 4 ORG YEL 8RED Playeld Feature White 9-LP-19 520-5307-00
71 Right Loop Sigil-R 9 9a CN1 6 RED VIO 11 RED Playeld Feature RGB 9-LP-26 520-5333-00
72 Right Loop Sigil-G 9 9a CN1 5 GRN VIO 11 RED Playeld Feature RGB 9-LP-27 520-5333-00
73 Right Loop Sigil-B 9 9a CN1 4 BLU VIO 11 RED Playeld Feature RGB 9-LP-28 520-5333-00
74 Right Loop Arrow 9 9a CN2 3ORG GRN 8RED Playeld Feature White 9-LP-20 520-5307-00
75 Left Top Lane 10 - CN16 15 ORG GRY 1 YEL Playeld Feature White 10-LP-14 520-5307-00
76 Right Top Lane 10 - CN16 16 ORG WHT 1 YEL Playeld Feature White 10-LP-15 520-5307-00
77 Left Pop Bumper 10 - CN16 2BRN BLK 1 YEL Playeld Feature White 10-LP-1 520-6971-01
78 Right Pop Bumper 10 - CN16 3BRN 1 YEL Playeld Feature White 10-LP-2 520-6971-01
79 Bottom Pop Bumper 10 - CN16 4 BRN RED 1 YEL Playeld Feature White 10-LP-3 520-6971-01
80
81
82
83
84
85 Coin Door GI 1 - CN5 2YEL 1 YEL-WHT Coin Door G.I. White 1-LP-1 112-5033-08
86 Lower Playeld GI 8- CN13 1 WHT BLK 3YEL BLK Playeld G.I. White 8-LP-4 112-5034-08
87 Left Playeld GI 9- CN13 1 RED BLK 3YEL RED Playeld G.I. White 9-LP-0 112-5034-08
88 Upper GI 10 - CN13 1 BLU BLK 3YEL BLU Playeld/Back
Panel
G.I. - 10-LP-0 112-5034-xx
89
90
91
92
93
94
95 Sword Lock 9- CN16 15 ORG BLK 1 YEL Playeld Flash White 9-LP-14 113-5045-08
96 Right Ramp 10 - CN16 5 YEL BLK 1 YEL Playeld Flash White 10-LP-4 113-5045-08
97 Pop Bumpers 10 - CN16 6 YEL BRN 1 YEL Playeld Flash White 10-LP-5 113-5045-08
98 Left Ramp 10 10a CN1 5 BRN GRY 11 RED Playeld Flash White 10-LP-27 113-5045-08
99 Kickback Lane 10 10a CN1 6 BRN VIO 11 RED Playeld Flash White 10-LP-26 113-5045-08
100 Back Panel (L) 10 - CN16 8YEL GRN 1 YEL Back Panel Flash White 10-LP-7 113-5045-08
For Sales + Purchasing Info, Click Page To Visit BMI Gaming | www.bmigaming.com | + 561-391-7200 | [phone]