Stern Pinball LED ZEPPELIN PRO User manual
LED ZEPPELIN
SERVICE AND OPERATION MANUAL
Games congured for North America operate on 60 cycle electricity only. These games will not operate in countries with 50 cycle electricity (Europe, UK, Australia).
WARNING
IMPORTANT HEALTH WARNING: PHOTOSENSITIVE SEIZURES - A very small percentage of people may experience a seizure when exposed to certain visual images,
including ashing lights or patterns. Even people with no history of seizures of epilepsy may have an undiagnosed condition that can cause “photosensitive epileptic
seizures” due to certain visual images, ashing lights or patterns. Symptoms can include lightheadedness, altered vision, eye or face twitching, jerking or shaking of arms or
legs, disorientation, confusion, momentary loss of awareness, and loss of consciousness or convulsions that can lead to injury from falling down or striking nearby objects.
IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU EXPERIENCE ANY OF THESE SYMPTOMS.
www.sternpinball.com - facebook.com/sternpinball
MANUAL #780-50R5-00
LED ZEPPELIN PRO #500-55R5-01
©2020 Mythgem, LTD.
Stern Pinball machines are assembled in Elk Grove Village, Illinois, USA. Stern Pinball has inspected each game element to ensure it meets our quality standards.
Each pinball machine has unique characteristics that make it a one-of-a-kind American made product. Each will have variations in appearance resulting from differences
in the machine’s particular wood parts, individual printed art and mechanical assemblies. No playeld is perfectly at and varies depending on the season. Game play will
result in playeld dimpling as the harder steel ball contacts the wood and coating; over time multiple dimples will blend to make them less noticeable. Normal plastic insert
crazing (tiny stress cracks) and ghosting (small cloudy areas around insert edges) are often seen in pinball machines, due to a combination of plastic mold stress, pushing of
inserts into purposely undersized holes, and heating and breaking of inserts’ plastic “skin” when the playeld is sanded.
SERVICE AND OPERATION MANUAL
ATTENTION! IMPORTANT WARRANTY INFORMATION
The electronics system, node network architecture, mechanical devices and associated software control systems in this pinball machine are designed to work with genuine
Stern Pinball accessories and devices.
Installation of non-authorized accessories, lamps, LED’s, motors or other devices or modication of electro-mechanical devices may damage the system and will void your
warranty.
2
LED ZEPPELIN PRO MANUAL 500-55R5-01 ©2020 Mythgem, LTD.
TABLE OF CONTENTS
1. Setup and Moving .................................. 3
1.1 First-Time Setup Instructions ............................... 3
1.2 Adjustments Menu ............................................... 6
1.3 Transporting the Game ........................................ 7
1.4 Maintenance ........................................................ 8
1.5 Maintenance Kits ................................................. 8
1.6 Common Parts ..................................................... 8
2. SPIKE System and Node Guide ............ 9
2.1 SPIKE System Overview ...................................... 9
2.2 Node Bus Cabling ................................................ 9
2.3 System Power ...................................................... 9
2.4 SPIKE Node Addresses ....................................... 9
2.5 SPIKE Node Programming................................. 10
2.6 SPIKE System Terminology ............................... 10
2.7 Common SPIKE Node Boards ........................... 10
3. Light, Switch, and Driver Reference... 11
3.1 SPIKE Node Boards ........................................... 11
3.2 Driver Reference ................................................ 12
3.3 Switch Reference ............................................... 14
3.4 Light Reference .................................................. 18
4. Electronic Pinouts and Schematics.... 30
4.1 SPIKE-2 CPU Node 0 ........................................ 30
4.2 Cabinet Node 1 .................................................. 34
4.3 Lower Playeld 48V Driver Pinout Node 8 ......... 35
4.4 Mid Upper Playeld 48V Driver Pinout Node 9 . . 36
4.5 Lower Center LED Board 8b .............................. 37
4.6 Center Right LED Board 8b1 ............................. 37
4.7 Center Left LED Board 9a .................................. 38
4.8 Center Far Left LED Board 9a1 .......................... 39
4.9 Upper Left LED Board 9a2 ................................. 39
4.10 Center Lower LED Board 9a3 ............................ 39
4.11 Trough Serial Opto Receiver 8a ......................... 40
4.12 Trough Serial Opto Transmitter .......................... 40
4.13 Main Power Supply ............................................ 40
4.14 Power Distribution Board ................................... 41
4.15 Power Plug Wiring.............................................. 41
5. Parts Reference.................................... 42
5.1 Playeld Rubber Parts ....................................... 42
5.2 Rubber Size Chart .............................................. 42
5.3 Playeld Assemblies, Top .................................. 43
5.4 Playeld Assemblies, Bottom ............................ 44
5.5 Backbox Parts.................................................... 45
5.6 Speaker Panel Parts .......................................... 45
5.7 Cabinet Parts ..................................................... 46
5.8 Ball Shooter Assembly ....................................... 47
5.9 Shooter One Way Gate Assembly ..................... 47
5.10 Auto Launch Assembly ...................................... 47
5.11 Ball Trough Assembly......................................... 48
5.12 Slingshot Assembly............................................ 48
5.13 Flipper Assembly, Left ........................................ 49
5.14 Flipper Assembly, Right ..................................... 49
5.15 Pop Bumper Assembly ...................................... 50
5.16 Bottom Arch Assembly ...................................... 51
5.17 Left Wireform Ramp Assembly .......................... 51
5.18 VUK Assembly ................................................... 51
5.19 3-Bank Drop Target Assembly ........................... 52
5.20 Left Ramp Assembly .......................................... 53
5.21 Left Ramp Riveted Assembly ............................. 53
5.22 Right Ramp Assembly ....................................... 54
5.23 Right Ramp Riveted Assembly .......................... 54
5.24 Center Ramp Assembly ..................................... 55
5.25 Center Ramp Riveted Assembly ........................ 55
5.26 Electric Gate Hood Mount Assembly ................. 55
5.27 Plastic 07 Assembly ........................................... 56
5.28 Plastic 08 Assembly ........................................... 56
5.29 Plastic 27 Assembly ........................................... 56
5.30 Plastic 29 Riveted Assembly .............................. 56
5.31 Plastic 29 Assembly ........................................... 57
5.32 Plastic 33 Assembly ........................................... 57
5.33 Plastic 37 Assembly ........................................... 57
5.34 One Way Gate Assembly ................................... 58
5.35 Icarus Rod Assembly ......................................... 58
5.36 Ball Guide 01 Assembly ..................................... 58
5.37 Ball Guide 02 Assembly ..................................... 58
5.38 Backpanel Assembly.......................................... 59
6. Specications ....................................... 60
6.1 Game Dimensions .............................................. 60
6.2 Warranty ............................................................. 61
6.3 Warnings, Compliance, and Legal Notices ........ 61
6.4 Stern Pinball End User License Agreement ....... 62
SONG REMAINS THE SAME
© 1973 WC MUSIC CORP. (ASCAP)
On behalf of Flames of Albion Music, Inc.
BLACK DOG
© 1972 WC MUSIC CORP. (ASCAP)
On behalf of Flames of Albion Music, Inc.
ROCK AND ROLL
© 1972 WC MUSIC CORP. (ASCAP)
On behalf of Flames of Albion Music, Inc.
WHOLE LOTTA LOVE
© 1969 WC MUSIC CORP. (ASCAP)
On behalf of Flames of Albion Music, Inc.
TRAMPLED UNDER FOOT
© 1975 WC MUSIC CORP. (ASCAP)
On behalf of Flames of Albion Music, Inc.
IMMIGRANT SONG
© 1970 WC MUSIC CORP. (ASCAP)
On behalf of Flames of Albion Music, Inc.
KASHMIR
© 1975 WC MUSIC CORP. (ASCAP)
On behalf of Flames of Albion Music, Inc.
RAMBLE ON
© 1969 WC MUSIC CORP. (ASCAP)
On behalf of Flames of Albion Music, Inc.
COMMUNICATION BREAKDOWN
© 1969 WC MUSIC CORP. (ASCAP)
On behalf of Flames of Albion Music, Inc.
GOOD TIMES BAD TIMES
© 1969 WC MUSIC CORP. (ASCAP)
On behalf of Flames of Albion Music, Inc.
ALL RIGHTS RESERVED. USED BY
PERMISSION.
1. SETUP AND MOVING
2
2
557
7
1
9
8
11
15
11
8
6
14
14
SETUP AND MOVING
3
LED ZEPPELIN PRO MANUAL 500-55R5-01
©2020 Mythgem, LTD.
1.1 FIRST-TIME
SETUP INSTRUCTIONS
CAUTION: AT LEAST TWO (2)
PEOPLE ARE REQUIRED TO
MOVE AND MANEUVER THE
GAME. USE PROPER MOVING
EQUIPMENT AND EXTREME
CARE WHILE HANDLING. STERN
PINBALL MACHINES WEIGH
OVER 250LBS BOXED.
TOOLS REQUIRED
• 5/8” Socket Wrench
• Utility Knife
• Snips
• An Assistant
Your brand new Stern Pinball Machine is
carefully packed for safety and security.
For your safety, exercise caution and use
the correct tools and sufcient help when
setting up your new game.
1. Locate the side labeled “TRUCK
THIS SIDE ONLY”. The bottom of
the game faces this side.
2. Open the top box aps by pulling
hard in an upward motion on each
ap. If the aps are taped, cut the
tape rst, taking care to avoid the
box staples.
3. Remove the four (4) foam pieces
and two (2) narrow box tubes
which contain the four (4) identical
legs with levelers.
4. DO NOT CUT STRAPPING YET.
Keep backbox secured in the
down position.
5. With the utility knife, carefully cut
down the left and right corners of
the box.
6. Let the face fall forward and
remove the entire side by carefully
cutting the bottom.
7. With the game still in its folded po-
sition, use a ⅝” wrench to loosen
and remove the 2 leg bolts on each
side of the front cabinet. Ensure
the leg levelers are screwed all the
way into the legs.
8. Install front legs using the bolts
removed from the cabinet. Secure
tightly.
9. Have someone help you carefully
set the game down on the front
legs.
10. Set aside the open box.
11. With a ⅝” socket wrench, loosen
and remove the 2 leg bolts on
each side of the rear cabinet, 4
total.
12. Using supports or two people,
prop the rear of the cabinet up.
13. Ensure the rear leg levelers are
screwed all the way into the legs.
14. Install rear legs using the 4 bolts
removed from step 11.
19
21
17
25
26
27
FIRST-TIME SETUP CONTINUED
27
4
SETUP AND MOVING
LED ZEPPELIN PRO MANUAL 500-55R5-01 ©2020 Mythgem, LTD.
15. Cut nylon strapping and remove
protective strap corner guards.
16. Locate the factory keys, either on
the shooter rod or taped to the
playeld glass.
17. Using snips, cut the tie-wrap secur-
ing the keys if required. One set of
keys is for the front coin door, the
other set of keys is for accessing
components in the backbox.
18. Open the front coin door.
19. Reach into the game and remove
the retaining clip at the rear of the
cash box.
20. Remove the cash box lid by sliding
it toward you.
21. Store the backbox keys, if desired,
on the metal hook located in the
coin door.
22. Locate and remove the pinballs,
plumb bob, and backbox bolts
from the cash box.
23. Replace the cash box lid and
retaining clip for future use.
24. Locate the two (2) backbox bolts in
the cash box.
25. Carefully raise backbox to upright
position while ensuring that cables
are not pinched.
26. Use the ⅝” wrench to Install the
two (2) backbox bolts to secure the
backbox as indicated on the back
of the cabinet.
27. Reach inside the cabinet and lift
the two latches located on either
side of the coin door.
28. Remove the front top molding.
29. Remove the playeld glass by
sliding it toward you and carefully
place it in a safe location.
Remove all playeld shipping
tie downs, shipping blocks, and
packing foam, and follow any
game-specic unpacking instruc-
tions included in the playeld, if
present.
CAUTION: PLAYFIELD GLASS IS MADE FROM HIGH-STRENGTH TEMPERED
GLASS. TEMPERED GLASS IS SENSITIVE TO EXTREME TEMPERATURE SHIFTS
AND CORNER NICKS, WHICH CAN CAUSE THE GLASS TO FAIL CATASTROPHI-
CALLY. TAKE CARE TO STORE THE GLASS ON A SOFT, ROOM-TEMPERATURE
SURFACE AND PREVENT THE CORNERS FROM BEING DAMAGED.
SETUP AND MOVING
5
LED ZEPPELIN PRO MANUAL 500-55R5-01
©2020 Mythgem, LTD.
30. If pinballs were already installed into the lower ball
trough, remove them before lifting the playeld.
31. Grasp the lower arch between the ippers, and rmly
but gently pull directly up to raise the playeld 8 to 12
inches.
32. While holding the playeld up, pull the playeld toward
you until the two playeld supports are over the front
edge of the cabinet.
33. Rest the playeld on the front edge of the cabinet.
34. Raise the playeld and rest it against the backbox.
35. Visually inspect all cabinet cables and connector termi-
nations; ensure no wires or cables are pinched and that
cable harnesses are not pulled tight.
36. Locate the plumb bob in the parts bag in the cash box.
37. Slide plumb bob onto the hanger wire. Note: the vertical
position of the plumb bob affects tilt sensitivity - higher
makes the game more sensitive to tilting.
38. Tighten the thumb screw nger-tight.
39. Install the correct number of pinballs. Refer to the decal
on the lock down assembly for the correct number of
pinballs.
LOCATING, LEVELING, AND FINAL SETUP
1. Select a location that is indoors, out of direct sunlight,
and climate controlled. Excessive moisture/humidity
can cause long-term damage to your game.
2. Adjust the front or rear levelers as necessary to position
the playeld level bubble, located on the front right of
the playeld next to the shooter lane, to oat between
the two (2) black lines. This will place the playeld at the
recommended 6.5° pitch. Playeld angles greater than
6.5° can be achieved by turning out the rear leg level-
er(s) for increased difculty and faster gameplay.
3. Use a pinball to roll down the center of the playeld for
side-to-side leveling, or use an external bubble level,
digital level, or smartphone level app.
4. Plug into a grounded outlet and check for proper opera-
tion through DIAGNOSTICS.
5. Check the coin door: With the door closed, insert coins
to verify proper operation.
6. Play game: Check for satisfactory operation and adjust
game volume (push the Red Buttons inside the Coin
Door).
7. If desired, perform any game diagnostics, game adjust-
ments, and pricing settings at this time.
FIRST-TIME SETUP CONTINUED
SPIKE PINBALL SOFTWARE
UPDATE INSTRUCTIONS
1. Obtain game software update le (lename ends
in “.spk”) from www.sternpinball.com or from
authorized Stern distributor.
2. Place game software update le ( “.spk”) in root
directory of a blank FAT32-formatted USB ash
drive
3. Use backbox power switch to turn off game
4. Plug in USB ash drive to CPU board USB
connector (CN20 or CN21). Refer to www.
sternpinball.com
5. Turn on game
6. The game will automatically begin software
update
7. Select the correct .spk update le from list.
8. Press Enter on the service switches to start
update
9. When the display indicates “Update Complete”,
turn off game
10. Remove USB ash drive from CPU board
11. Turn game on to complete the update and play
pinball!
12. Detailed instructions and troubleshooting tips
are available in the game manual, www.sternpin-
ball.com and authorized Stern distributors.
LCD BACKBOX
5009995-XX
ON/OFF Switch
POWER SWITCH
The game’s power switch is located on the right-hand side
underneath the backbox.
6
SETUP AND MOVING
LED ZEPPELIN PRO MANUAL 500-55R5-01 ©2020 Mythgem, LTD.
1.2 ADJUSTMENTS MENU
STANDARD ADJUSTMENTS
Perform the below steps to review the adjustments.
Enter the Service Menu, then enter the Standard Adjustments
Menu.
Press SELECT to access the Service Menu. Press BACK to exit
or escape at any time.
Press [>]. Go to the ADJ icon. Press SELECT.
Go to the S.P.I. icon. Press SELECT.
STANDARD ADJUSTMENT #1 appears with the adjustment
name ashing. While the adjustment name is ashing press [<]
[>] to move between adjustments.
To change the adjustment setting press SELECT. While the
adjustment setting is ashing, press [<] [>] repeatedly until
the desired setting appears. Press the SELECT button to
“install” the change. The adjustment comment (bottom line) will
indicate if the factory default setting is selected or will display
INSTALLED if the change is not a factory default setting.
FEATURE ADJUSTMENTS
Each table has feature adjustments specic to the
characteristics of that game. To access feature adjustments
enter the Service Menu and then enter the Adjustments Menu.
Press SELECT to access the Service Menu. Press BACK to exit
or escape at any time.
Press [>]. Go to the ADJ icon. Press SELECT.
Go to the game icon. Press SELECT.
FEATURE ADJUSTMENT #1 appears with the adjustment name
ashing. With the adjustment name ashing press [<] [>] to
move between adjustments. Feature adjustments are changed
similarly to standard adjustments using the SELECT button
to choose options and the [<] [>] buttons to cycle through
available settings.
ID Adjustment Name Default Setting
1 REPLAY TYPE AUTO
2REPLAY PERCENTAGE 10%
3REPLAY AWARD CREDIT
4 REPLAY LEVELS 1
5 AUTO REPLAY START 20,000,000
6 DYNAMIC REPLAY START 60,000,000
7REPLAY LEVEL #1 15,000,000
8REPLAY LEVEL #2 30,000,000
9REPLAY LEVEL #3 45,000,000
10 REPLAY LEVEL #4 60,000,000
11 REPLAY BOOST YES
12 SPECIAL LIMIT 1
13 SPECIAL PERCENTAGE 10%
14 SPECIAL AWARD CREDIT
15 FREE GAME LIMIT 5
16 EXTRA BALL LIMIT 5
17 EXTRA BALL PERCENTAGE 25%
18 GAME PRICING USA 11
19 MATCH PERCENTAGE 9%
20 MATCH AWARD CREDIT
21 BALLS PER GAME 3
22 TILT WARNINGS 2
23 TILT DEBOUNCE 1000
24 CREDIT LIMIT 30
25 ALLOW HIGH SCORES YES
26 HIGH SCORE AWARD CREDIT
27 GRAND CHAMPION AWARDS 1
28 HIGH SCORE #1 AWARDS 1
29 HIGH SCORE #2 AWARDS 0
30 HIGH SCORE #3 AWARDS 0
31 HIGH SCORE #4 AWARDS 0
32 GRAND CHAMPION SCORE 75,000,000
33 HIGH SCORE #1 55,000,000
34 HIGH SCORE #2 40,000,000
35 HIGH SCORE #3 30,000,000
36 HIGH SCORE #4 25,000,000
37 HSTD INITIALS 3 INITIALS
ID Adjustment Name Default Setting
38 HSTD RESET COUNT 2000
39 FREE PLAY NO
40 LANGUAGE ENGLISH
41 PLAYER LANGUAGE SELECT YES
42 CUSTOM MESSAGE ON
43 KNOCKER VOLUME NORMAL
44 GAME START NO
45 GAME RESTART YES
46 BALL SAVE TIME 0:05
47 TIMED PLUNGER OFF
48 FLIPPER BALL LAUNCH OFF
49 COINDOOR BALL SAVER OFF
50 COMPETITION MODE NO
51 FAST BOOT YES
52 Q24 OPTION COIN METER
53 TICKET DISPENSER NO
54 PLAYER COMPETITION MODE YES
55 LOCATION ID 0
56 GAME ID 0
57 TIME FORMAT 12-HOUR
58 COIN INPUT DELAY 30
59 LOST BALL RECOVERY YES
60 COINDOOR DISABLE TILT NO
61 COINDOOR OPEN NODE BUS POWER NO
62 PLAY ATTRACT TUTORIAL VIDEOS YES
63 EXTERNAL VOLUME KNOB FUNCTION HEADPHONE VOLUME ONLY
64 MUTE CABINET WHEN HEADPHONES DETECTED YES
65 GI LED BRIGHTNESS 100%
66 GI LED MAX BRIGHTNESS 255
67 INSERT LED BRIGHTNESS 100%%
68 INSTER LED MAX BRIGHTNESS 255%
69 FLASHER LED BRIGHTNESS 100%
70 FLASHER LED MAX BRIGHTNESS 255
71 ATTRACT MODE BACKBOX BRIGHTNESS 100%
72 GAMEPLAY BACKBOX BRIGHTNESS 100%
73 COINDOOR OPEN BACKBOX BRIGHTNESS 2%
SETUP AND MOVING
7
LED ZEPPELIN PRO MANUAL 500-55R5-01
©2020 Mythgem, LTD.
1. SECURE THE BACKBOX
1. Ensure that the pinballs are re-
moved from the playeld, and se-
cure any free-moving mechanisms
that may get damaged in transport
2. Remove the backbox securing
bolts
3. Carefully lower the backbox onto
the side rails. Use a piece of card-
board or suitable padding between
the backbox and the game.
4. Securely strap the back box to the
game
5. The game may be transported with
the legs on. If the legs must be re-
moved, follow the remaining steps.
2. REMOVE THE LEGS AND
STAND UP
1.3 TRANSPORTING THE GAME
2
3
4
6. Remove the legs, rear legs rst. Use
a stool or a friend to support the
rear of the game.
7. Rest the rear of the game on the
ground.
6
CAUTION
NEVER TRANSPORT THE GAME
IN A MOVING VEHICLE WITH THE
BACKBOX RAISED! TWO PEOPLE
ARE REQUIRED TO REMOVE THE
LEGS!
10. Secure all loose parts and trans-
port with a hand truck in the
upright position.
8. Stand the game up on its back.
8
9. Remove the front two legs.
9
When transporting the game, such as in the back of a truck or with a hand truck, the
game’s backbox must be secured to prevent damage to the side rails.
TOOLS REQUIRED
• STRAP (500LB OR GREATER)
• AN ASSISTANT
• HAND TRUCK
8
SETUP AND MOVING
LED ZEPPELIN PRO MANUAL 500-55R5-01 ©2020 Mythgem, LTD.
1.4 MAINTENANCE
REGULAR MAINTENANCE - (MONTHLY/500
GAMES)
• Remove the playeld glass
• Enter the software diagnostics menu, start lamp test, then
clean and wax the playeld.
• While cleaning the playeld, identify and repair malfunction-
ing lights, loose parts, cracked plastics and worn rubber
parts.
• While in diagnostics, enter the switch test (Select the "SW"
Icon, then "TEST" Icon).
• Use a pinball to actuate all switches and verify the correct
switch registers with the switch test.
• The game will play a sound to conrm the switch.
• Lift the playeld and inspect all assemblies for loose parts,
broken wires or excessive wear. Look at the bottom of the
cabinet for any parts that may have worked loose, then nd
the source.
• Check all coin door mechanisms and bill acceptor (if in-
stalled) for proper operation
• Play the game to ensure all coils and features are working
• Check the playeld to ensure it is level and set to the prop-
er pitch using the bubble level on the right side wood rail.
• Check game audits: Replay % and Ball Time and note
abnormal values which can indicate problems.
• Ensure game volume is set appropriately for the location.
• Clean both sides of the playeld glass and reinstall.
• Check and clean pinballs and replace if excessively worn or
scuffed. Dirty pinballs accelerate game wear.
OVERHAUL MAINTENANCE - (5000 GAMES)
• Verify latest game software is installed
• Check ippers for excessive wear. Excessive ipper sloppi-
ness (vertical or horizontal) or weakness indicates a ipper
rebuild is required.
• Clean machine inside and out and check leg levelers for
free operation.
• Visual check for loose or broken playeld and cabinet parts
and repair as necessary.
• Electrical check: Plug into grounded outlet and check for
proper operation through DIAGNOSTICS.
• Replace worn or dirty rubbers.
• Replace pinballs.
• Check all playeld switches with a pinball.
• Check all settings (refer to manual for factory settings).
• Check coin door: With door closed, insert coins to verify
proper operation.
• Check for proper adjustment of the plumb bob tilt.
• Play game: Check for satisfactory operation.
COMMON PINBALL TOOLS
• Common nut drivers (¼”, 5/16”, 11/32", ⅜”)
• Phillips screwdriver
• Standard Allen wrench/Hex key set
• ⅝” Socket with ratchet
• Adjustable wrench (5/8" & 9/16")
• 6" Torpedo Level (or use a pinball
• Flashlight or headlamp
• Soldering Iron (60w with at tip), lead-free solder
• Wire cutter
• Wire stripper
• Long nose (“needle nose”) pliers
1.5 MAINTENANCE KITS
Description Part Number
Led Zeppelin Maintenance Kit
8 oz pinball playeld wax (Novus # 2) (675-0003-01)
Standard Pinball (260-5000-00)
Cleaning Cloth
All Playeld Rubber Rings
Spare Fuses
502-6002-R5
Led Zeppelin Deluxe Maintenance Kit
All standard kit items, plus:
Flipper rebuild kits, Left and Right (500-6307-10,-00)
502-6003-R5
Led Zeppelin Playeld Plastics Kit 803-5000-R5
Led Zeppelin Playeld Decals Kit 802-5000-R5
Led Zeppelin Backbox Decal Left 820-76R5-01
Led Zeppelin Backbox Decal Right 820-76R5-02
Led Zeppelin Cabinet Decal Left 820-76R5-03
Led Zeppelin Cabinet Decal Right 820-76R5-04
Led Zeppelin Cabinet Decal Front 820-76R5-05
Led Zeppelin Playeld, Bare 830-5100-R5
Led Zeppelin Translite 830-8427-R5
1.6 COMMON PARTS
Description Part Number
8 oz Pinball Playeld wax (Novus # 2) 675-0003-01
Standard Pinball, 1-1/16 in 260-5000-00
Flipper Rebuild Kit Left (Standard) 500-6307-10
Flipper Base Plate Kit Left 515-6617-01
Flipper Rebuild Kit Right 500-6307-00
Flipper Base Plate Kit Right 515-6617-00
SPIKE SYSTEM AND NODE GUIDE
9
LED ZEPPELIN PRO MANUAL 500-55R5-01
©2020 Mythgem, LTD.
2. SPIKE SYSTEM AND NODE GUIDE
2.1 SPIKE SYSTEM OVERVIEW
The SPIKE Pinball system is a rugged, distributed, and em-
bedded platform custom-designed for the rigors of the pinball
machine environment. SPIKE takes advantage of modern tech-
nologies to deliver an immersive pinball experience that supports
modern features, reduces cabling, and increases serviceability
and reliability.
A Stern Pinball machine based on the SPIKE system will have at
least two nodes networked together with the SPIKE node bus,
a custom industrial pinball control bus that is designed around
industry standards and optimized for the pinball environment.
The primary CPU node is networked to one or more input/output
nodes over standard Category 5 UTP (unshielded twisted pair)
ethernet cabling.
There are ve primary types of nodes that are found in the game.
• CPU node (Node 0) - The primary node that controls other
nodes in the system. Contains the primary game software
for the system and provides SPIKE node bus power for other
nodes.
• Cabinet 48V node (Node 1) - Specialized node with specic
inputs and outputs for coin doors, tilt mechanisms, and other
bottom-cabinet devices.
• 48V playeld node - Controls high power devices such
as coils and ashers, and also supports a few switch and
low-power outputs. Powered by the system 48V power sup-
ply.
• Light and switch node - High-density switch and low-power
LED outputs, bus-powered from the node bus. These boards
contain as many 32 switch inputs and light outputs.
• Node extensions - These sub-nodes add additional low-pow-
er input and outputs to a specic Power or I/O node and are
connected with simple serial bus.
2.2 NODE BUS CABLING
The SPIKE node bus utilizes standard Ethernet-style RJ45 8-pin
modular jacks, and off-the-shelf Category 5e or better ethernet
cabling. The node bus is electrically different from Ethernet and
does not utilize Ethernet or TCP/IP protocols or signaling stan-
dards. SPIKE nodes are not compatible with standard computer
networking equipment.
CAUTION: Plugging a SPIKE Node or CPU board into a standard
Ethernet port may damage one or both devices and void your
warranty.
2.3 SYSTEM POWER
The SPIKE System is powered from an 48V DC power supply
bus. Each SPIKE node converts this voltage to lower voltages
required by the node and its specic components. A SPIKE 48V
node typically controls high-power outputs such as game coil
mechanisms and high-brightness LEDs. These powered nodes
are supplied directly with 48V system power. SPIKE standard I/O
nodes are low-power nodes that read switch inputs and output to
standard-brightness LEDs. Standard I/O nodes use the node bus
power, which is supplied by the main CPU node over the node
bus modular jack connectors.
2.4 SPIKE NODE ADDRESSES
Each SPIKE node has a unique address ranging from 0 to 15. Not
all addresses are used in all games. Nodes can be of the same
part number, so the address is specied on the DIP switches on
each node. When replacing a node, be certain that the correct
address is set. Nodes can have 3-position and 4-position DIP
switches. Refer to the appropriate table to set the address for
each type of Node. The correct address for a node can be found
in the SPIKE node reference section of the manual or in the game
diagnostic software. Address 0 is reserved for the backbox CPU
node, where the game software resides. Address 1 is reserved for
the cabinet node, located inside the coin door. These two nodes
do not have DIP switches as their address is not congurable.
Address 1 2 3
8OFF OFF OFF
9OFF OFF ON
10 OFF ON OFF
11 OFF ON ON
12 ON OFF OFF
13 ON OFF ON
14 ON ON OFF
15 ON ON ON
SPIKE node addresses for nodes with 3-position DIP switches.
Addresses 0-7 are not used by SPIKE nodes with 3-position DIP
switches.
Address 1 2 3 4
8OFF OFF OFF OFF
9OFF OFF ON OFF
10 OFF ON OFF OFF
11 OFF ON ON OFF
12 ON OFF OFF OFF
13 ON OFF ON OFF
14 ON ON OFF OFF
15 ON ON ON OFF
SPIKE node addresses for nodes with 4-position DIP switches.
Addresses 0-7 are reserved for xed-function nodes and do not
require conguration.
10
SPIKE SYSTEM AND NODE GUIDE
LED ZEPPELIN PRO MANUAL 500-55R5-01 ©2020 Mythgem, LTD.
SPIKE SYSTEM AND NODE GUIDE CONTINUED
2.5 SPIKE NODE PROGRAMMING
The SPIKE nodes are smart nodes that have on-board pro-
cessors and run embedded code. The nodes are programmed
automatically by the CPU node whenever software updates are
installed to the CPU. When replacing a node, the CPU node will
detect and update the node to the latest software with no user
intervention. Always replace nodes with the power to the game
turned OFF.
2.6 SPIKE SYSTEM TERMINOLOGY
MULTI GENERAL ILLUMINATION LIGHTING
General Illumination Lighting is two or more lights powered by
one control source. These are often a number of LEDs connect-
ed in parallel and the system controls these as one large LED. A
missing LED will not affect these circuits, however a shorted LED
can cause the entire string of LEDs to turn off.
SINGLE LIGHTS
Single lights and LEDs are direct-controlled from SPIKE node
boards. A common power source is grounded by individual
transistors to turn individual LEDs on and off. Groups of LEDs,
usually by node connector, share a common power source, so if
a group of LEDs is out, check the wiring for the power source.
FLASHERS
SPIKE games treat ashers the same as single LEDs that draw
more power. Flashers are controlled from the same circuits that
power regular lights.
DRIVERS
A driver is a circuit that controls a high power-device such as a
coil, magnet, or motor. Each device has a common 48V power
source that is then connected to ground by a dedicated control
transistor. Each driver is protected against shorting, static elec-
tricity, and over-current conditions. Take caution as 48V is always
present on a device even when it is not energized.
OPTOS
Certain types of optical switches (“optos”) require external signal
conditioning. For these optos, they will interface to a SPIKE node
via an opto signal conditioning board. Other optical switches
connect directly to the Spike node board.
CAUTION: Unless explicitly directed by an Authorized Stern
Repair technician, perform ALL work on your pinball machine with
the power disabled!
INPUT/OUTPUT PROTECTIONS
SPIKE features built-in short-circuit, static electricity, and other
protections to maximize reliability. If an LED, coil or other device
shorts, it will be disabled but will not shut down the entire system
in most circumstances. Groups of LEDs, coils, and switches often
share common power supplies or other circuits, so it is possible
that a bad device will affect the group of related devices and
require removal or repair to x the group. The system diagnostics
will inform the technician of shorted or otherwise malfunctioning
devices whenever possible. While the system is protected against
permanent damage, it is strongly recommended to repair or
replace these bad components as soon as possible to minimize
downtime and maximize game earnings.
2.7 COMMON SPIKE NODE BOARDS
Description Type Part Number
SPIKE CPU Node Node 509-1003-01
Cabinet Node Node 520-6967-72
Playeld 48V Core-Driver Node Node 520-7017-72
Trough Serial Opto Receiver Extension Extension 520-8516-00
LIGHT, SWITCH, AND DRIVER REFERENCE
11
LED ZEPPELIN PRO MANUAL 500-55R5-01
©2020 Mythgem, LTD.
3. LIGHT, SWITCH, AND DRIVER REFERENCE
3.1 SPIKE NODE BOARDS
OPTIONALOPTIONAL
BACKBOX
CPU NODE 0
CN4 CN5
8a
NODE 8
NODE 9
8b
8b1
9a3
9a2
9a1
9a
CN4
CN3
CN1
CN2
CN3
CN2
CN1
755-7512-R5 © 2020 MYTHGEM, LTD.
When replacing node boards,
ensure DIP address switches
are set correctly! PLAYFIELD REAR
PLAYFIELD FRONT
NODE BOARD ID INSTRUCTION SHEET
CN3
Node Bus Cable (RJ45)
604-5004-08-XX
Serial Data Cable
036-8054-XX
Terminator Plug
045-5315-00 CABINET
CABINET NODE 1
NODE 0
CABINET
CABINET NODE 2
CN13
CN2
CN13
CN11 CN22
CN5
ID DIP Address Description Location Part Number
Node 0 n/a SPIKE 2 CPU Node Backbox 509-1003-01
Node 1 n/a Cabinet Node Cabinet 520-6967-72
Node 2 ON-OFF-ON-ON SPI Node-PWM Light Blades (Optional) Cabinet 520-8087-72
Node 8 OFF-OFF-OFF-OFF Playeld 48V Core-Driver Node Lower Playeld 520-7017-72
8a n/a Trough Serial Opto Receiver Extension Playeld 520-8516-00
8b n/a Lower Center LED Board Playeld 520-8486-00
8b1 n/a Center Right LED Board Playeld 520-8487-00
Node 9 OFF-OFF-ON-OFF Playeld 48V Core-Driver Node Playeld 520-7017-72
9a n/a Center Left LED Board Playeld 520-8489-00
9a1 n/a Center Far Left LED Board Playeld 520-8490-00
9a2 n/a Upper Left LED Board Playeld 520-8494-00
9a3 n/a Center Lower LED Board Playeld 520-8488-00
Node 12 ON-OFF-OFF-OFF SPI Node-PWM Topper (Optional) Topper 520-8087-72
PRO
ID DIP Address Description Location Part Number
Node 0 n/a SPIKE 2 CPU Node Backbox 509-1003-01
Node 1 n/a Cabinet Node Cabinet 520-6967-72
Node 2 ON-OFF-ON-ON SPI Node-PWM (Optional) Cabinet 520-8087-72
Node 8 OFF-OFF-OFF-OFF Playeld 48V Core-Driver Node Lower Playeld 520-7017-72
8a n/a Trough Serial Opto Receiver Extension Playeld 520-8516-00
8b n/a Lower Center LED Board Playeld 520-8486-00
8b1 n/a Center Right LED Board Playeld 520-8487-00
Node 9 OFF-OFF-ON-OFF Playeld 48V Core-Driver Node Playeld 520-7017-72
9a n/a Center Left LED Board Playeld 520-8489-00
9a1 n/a Center Far Left LED Board Playeld 520-8490-00
9a2 n/a Upper Left LED Board Playeld 520-8494-00
9a3 n/a Center Lower LED Board Playeld 520-8488-00
Node 12 ON-OFF-OFF-OFF SPI Node-PWM Topper (Optional) Topper 520-8087-72
12
SPIKE SYSTEM AND NODE GUIDE
LED ZEPPELIN PRO MANUAL 500-55R5-01 ©2020 Mythgem, LTD.
3.2 DRIVER REFERENCE
Continued on next page...
ID Name Node Connector Ret.
Pin
Ret. Wire Voltage V+ Pin V+ Color Location Type Address Part Number
1 Trough 8CN8 7ORG GRY 48V 1/2/3/4 GRY ORG Playeld Coil - 27-1500 8-DR-1 090-5004-ND
2Auto Plunger 8CN8 9ORG WHT 48V 1/2/3/4 GRY ORG Playeld Coil - 23-800 8-DR-4 090-5001-ND
3Left Flipper 8CN8 6 ORG YEL 48V 1/2/3/4 GRY ORG Playeld Coil - 22-900 8-DR-5 090-5020-20-ND
4 Right Flipper 8CN8 5 ORG GRN 48V 1/2/3/4 GRY ORG Playeld Coil - 22-900 8-DR-0 090-5020-20-ND
5 Left Slingshot 8CN8 11 ORG BLU 48V 1/2/3/4 GRY ORG Playeld Coil - 26-1200 8-DR-3 090-5044-ND
6 Right Slingshot 8CN8 10 ORG VIO 48V 1/2/3/4 GRY ORG Playeld Coil - 26-1200 8-DR-2 090-5044-ND
7Shaker Motor 1 CN16 1 BLU 48V 5 RED Cabinet Motor 1-DR-0 041-5029-04
8
9Up R Flipper 8CN7 4 YEL BRN 48V 1 GRY ORG Playeld Coil - 22-900 8-DR-7 090-5020-20-ND
10 Left Eject 8CN7 2YEL RED 48V 1 GRY ORG Playeld Coil - 24-940 8-DR-8 090-5036-ND
11
12 .
13 Top VUK 9CN8 7YEL GRN 48V 1/2/3/4 GRY BRN Playeld Coil - 24-940 9-DR-1 090-5036-ND
14
15
16 Right Control Gate 9CN8 6 BLU RED 48V 1/2/3/4 GRY BRN Playeld Coil - 32-1250 9-DR-5 090-5060-01-ND
17
18 Left Pop Bumper 9CN8 10 ORG BLK 48V 1/2/3/4 GRY BRN Playeld Coil - 26-1200 9-DR-2 090-5044-ND
19 Right Pop Bumper 9CN8 11 ORG BRN 48V 1/2/3/4 GRY BRN Playeld Coil - 26-1200 9-DR-3 090-5044-ND
20 Bot Pop Bumper 9CN8 9ORG RED 48V 1/2/3/4 GRY BRN Playeld Coil - 26-1200 9-DR-4 090-5044-ND
21
22 Drop Target Reset 9CN7 2YEL ORG 48V 1 GRY BRN Playeld Coil - 25-1240 9-DR-8 090-5034-ND
23
24
25
26
27
28
29
30
31
32
33 Coin Meter 1 CN3 2BLK 12V 1 RED Cabinet Digital Out 1-DR-2 500-9946-00
34 Ticket Meter 1 CN4 2BLK 12V 1 RED Cabinet Digital Out 1-DR-3 500-9946-00
35 Ticket Dispenser 1 CN11 312V 1 Cabinet Digital Out 1-DR-4
SPIKE SYSTEM AND NODE GUIDE
13
LED ZEPPELIN PRO MANUAL 500-55R5-01
©2020 Mythgem, LTD.
Figure 3.2.1. Playeld driver locations (top view).
DRIVER REFERENCE CONTINUED
14
SPIKE SYSTEM AND NODE GUIDE
LED ZEPPELIN PRO MANUAL 500-55R5-01 ©2020 Mythgem, LTD.
3.3 SWITCH REFERENCE
Continued on next page...
ID Name Node Node
Ext
Conn. Input
Pin
Input Wire GND
Pin
Ground
Wire
Location Type Address Part Number
1 Left Outlane 8- CN11 4 LGN RED 11-12 BLK ORG Playeld Rollover 8-SW-17 500-9935-03
2Left Return Lane 8- CN11 5 LGN ORG 11-12 BLK ORG Playeld Rollover 8-SW-18 500-9935-03
3
4
5 Right Return Lane 8- CN11 6 LGN YEL 11-12 BLK ORG Playeld Rollover 8-SW-19 500-9935-04
6 Right Outlane 8- CN11 7LGN BLU 11-12 BLK ORG Playeld Rollover 8-SW-20 500-9935-04
7Left Slingshot 8- CN10 4 GRY BLU 8BLK GRN Playeld Leaf 8-SW-30 180-5231-00
8Right Slingshot 8- CN10 3GRY VIO 8BLK GRN Playeld Leaf 8-SW-29 180-5231-00
9Left Flipper Button 8- CN9 4 GRY BRN 7BLK GRN Cabinet Leaf 8-SW-25 180-5160-01
10 Right Flipper Button 8- CN9 3GRY RED 7BLK GRN Cabinet Leaf 8-SW-24 180-5164-01
11 Left Flipper EOS 8- CN10 6 GRY YEL 9BLK GRN Playeld Leaf 8-SW-16 180-5149-00
12 Right Flipper EOS 8- CN10 5 GRY GRN 9BLK GRN Playeld Leaf 8-SW-31 180-5149-00
13
14 UP Right Flipper Button 8- CN9 5 VIO WHT 7BLK VIO Playeld Leaf 8-SW-26 180-5149-00
15 Trough 6 8 8a CN14 - - - - Playeld Opto 8-SW-32 520-5344-00 tx
520-8516-00 rx
16 Trough 5 8 8a CN14 - - - - Playeld Opto 8-SW-33 520-5344-00 tx
520-8516-00 rx
17 Trough 4 8 8a CN14 - - - - Playeld Opto 8-SW-34 520-5344-00 tx
520-8516-00 rx
18 Trough 3 8 8a CN14 - - - - Playeld Opto 8-SW-35 520-5344-00 tx
520-8516-00 rx
19 Trough 2 8 8a CN14 - - - - Playeld Opto 8-SW-36 520-5344-00 tx
520-8516-00 rx
20 Trough 1 8 8a CN14 - - - - Playeld Opto 8-SW-37 520-5344-00 tx
520-8516-00 rx
21 Trough Jam 8 8a CN14 - - - - Playeld Opto 8-SW-38 520-5344-00 tx
520-8516-00 rx
22 Shooter Lane 8- CN10 2GRY WHT 7BLK GRN Playeld Rollover 8-SW-28 180-5157-01
23 Skill Shot 8- CN11 8LGN VIO 11-12 BLK ORG Playeld Rollover 8-SW-21 500-9935-04
24 Up Right Flipper EOS 8- CN12 9PNK BRN 10 BLK RED Playeld Leaf 8-SW-15 180-5149-00
25
26
27
28 Left 2 Bank Target Top 8- CN11 9LGN GRY 11-12 BLK ORG Playeld Leaf, Target 8-SW-22 515-9783-00-00
29 Left 2 Bank Target Bottom 8- CN11 10 LGN WHT 11-12 BLK ORG Playeld Leaf, Target 8-SW-23 515-9783-00-00
30
31 Left Eject 8- CN12 2WHT BRN 10 BLK RED Playeld Micro 8-SW-8 180-5209-00
32 Left Spinner 8- CN12 3WHT RED 10 BLK RED Playeld Micro 8-SW-9 180-5010-04
33
34
35 Mid 3 Bank Target-L 8- CN13 6 PNK BLU 10 BLK BRN Playeld Leaf, Target 8-SW-4 515-9783-00-00
36 Mid 3 Bank Target-E 8- CN13 5 PNK GRN 10 BLK BRN Playeld Leaf, Target 8-SW-3 515-9783-00-00
37 Mid 3 Bank Target-D 8- CN13 4 PNK YEL 10 BLK BRN Playeld Leaf, Target 8-SW-2 515-9783-00-00
38
39 3 Bank Drop-Z 9- CN9 3LGN ORG 7/8 BLK BLU Playeld Opto 9-SW-24 520-5252-13
40 3 Bank Drop-E 9- CN9 4 LGN YEL 7/8 BLK BLU Playeld Opto 9-SW-25 520-5252-13
41 3 Bank Drop-P 9- CN9 5 LGN BLU 7/8 BLK BLU Playeld Opto 9-SW-26 520-5252-13
42
43 Right 4 Bank Target-R 8- CN12 4 WHT ORG 10 BLK RED Playeld Leaf, Target 8-SW-10 515-9783-00-00
44 Right 4 Bank Target-O 8- CN12 5 WHT YEL 10 BLK RED Playeld Leaf, Target 8-SW-11 515-9783-00-00
45 Right 4 Bank Target-C 8- CN12 6 WHT GRN 10 BLK RED Playeld Leaf, Target 8-SW-12 515-9783-00-00
SPIKE SYSTEM AND NODE GUIDE
15
LED ZEPPELIN PRO MANUAL 500-55R5-01
©2020 Mythgem, LTD.
SWITCH REFERENCE CONTINUED
Continued on next page...
ID Name Node Node
Ext
Conn. Input
Pin
Input Wire GND
Pin
Ground
Wire
Location Type Address Part Number
46 Right 4 Bank Target-K 8- CN12 7WHT BLU 10 BLK RED Playeld Leaf, Target 8-SW-13 515-9783-00-00
47
48 Left Pop Bumper 9- CN10 2GRY BLK 7/8/9 BLK BLU Playeld Leaf 9-SW-28 180-5232-00
49 Right Pop Bumper 9- CN10 3GRY BRN 7/8/9 BLK BLU Playeld Leaf 9-SW-29 180-5232-00
50 Bottom Pop Bumper 9- CN10 4 GRY RED 7/8/9 BLK BLU Playeld Leaf 9-SW-30 180-5232-00
51
52
53 Icarus Target 9- CN10 6 GRY YEL 7/8/9 BLK BLU Playeld Leaf, Target 9-SW-16 515-9785-00-00
54 Left Orbit 9- CN11 4 TAN ORG 11/12 BLK GRY Playeld Rollover 9-SW-17 500-9935-03
55 Right Orbit 9- CN9 6 LGN VIO 7/8 BLK BLU Playeld Rollover 9-SW-27 500-9935-04
56
57
58 Top VUK 9- CN11 5 TAN YEL 11/12 BLK GRY Playeld Micro 9-SW-18 180-5209-00
59
60 Left Ramp Exit Opto 9- CN11 6 TAN GRN 11/12 BLK GRY Playeld Opto 9-SW-19 515-0215-00 tx
515-0215-01 rx
61 Hermit Target 9- CN11 7TAN BLU 11/12 BLK GRY Playeld Leaf, Target 9-SW-20 515-9783-00-00
62 Center Ramp Exit Opto 9- CN11 8TAN VIO 11/12 BLK GRY Playeld Opto 9-SW-21 520-8115-00 tx
520-8116-00 rx
63 Right Ramp Exit Opto 9- CN11 9TAN WHT 11/12 BLK GRY Playeld Opto 9-SW-22 520-8115-00 tx
520-8116-00 rx
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85 Lockdown Button 1 - CN7 8TAN WHT 5 BLK WHT Cabinet Leaf 1-SW-2 180-5218-00
86
87
88 Start Button 1 - CN6 10 GRY 5 BLK WHT Cabinet Micro 1-SW-11 500-1060-44-LED
89 Tournament Start Button 1 - CN6 9GRY WHT 5 BLK WHT Cabinet Micro 1-SW-12 500-6587-06-TL
90
91 Left Coin 1 - CN5 9PNK BRN 3BLK Cabinet Micro 1-SW-16
92 Right Coin 1 - CN5 7PNK ORG 3BLK Cabinet Micro 1-SW-18
93 Center Coin 1 - CN5 8PNK RED 3BLK Cabinet Micro 1-SW-17
94 Fourth Coin 1 - CN5 6 -Cabinet - 1-SW-19
16
SPIKE SYSTEM AND NODE GUIDE
LED ZEPPELIN PRO MANUAL 500-55R5-01 ©2020 Mythgem, LTD.
SWITCH REFERENCE CONTINUED
Continued on next page...
ID Name Node Node
Ext
Conn. Input
Pin
Input Wire GND
Pin
Ground
Wire
Location Type Address Part Number
95 Fifth Coin 1 - CN5 5 -Cabinet - 1-SW-20
96 Tilt Pendulum 1 - CN6 7WHT 5 BLK WHT Cabinet Plumb Bob 1-SW-14 516-0007-00
97 Sixth Coin 1 - CN9 5 -Cabinet - 1-SW-21
98 Ticket Notch 1 - CN11 5 -Cabinet - 1-SW-8
99 Slam Tilt 1 - CN5 4 LGN RED 3BLK Cabinet - 1-SW-22
100
101
C1 DIP 1 0 - - - -CPU Node 0-SW-0 -
C2 DIP 2 0 - - - -CPU Node 0-SW-1 -
C3 DIP 3 0 - - - -CPU Node 0-SW-2 -
C4 DIP 4 0 - - - -CPU Node 0-SW-3 -
C5 DIP 5 0 - - - -CPU Node 0-SW-4 -
C6 DIP 6 0 - - - -CPU Node 0-SW-5 -
C7 DIP 7 0 - - - -CPU Node 0-SW-6 -
C8 DIP 8 0 - - - -CPU Node 0-SW-7 -
C9 Service Select 0 - CN25 4 LGN GRY 6 BLK Coin Door 0-SW-8 515-1963-00
C10 Service Plus 0 - CN25 3LGN VIO 6 BLK Coin Door 0-SW-9 515-1963-00
C11 Service Minus 0 - CN25 2LGN BLU 6 BLK Coin Door 0-SW-10 515-1963-00
C12 Service Back 0 - CN25 1 LGN BLK 6 BLK Coin Door 0-SW-11 515-1963-00
C17 Headphone Detect 0 - - - - - - Coin Door 0-SW-16 -
C18 Headphone Kit Cable
Detect
0 - CN3 5 BLK 4 BLK CPU Node 0-SW-17 -
C19 Volume Encoder 1 0 - CN3 6 WHT 1 DRAIN CPU Node 0-SW-18 -
C20 Volume Encoder 2 0 - CN3 7GRN 1 DRAIN CPU Node 0-SW-19 -
C24 Coin Door Interlock 0 - CN4 1 GRY 4 GRY RED Backbox 0-SW-23 -
SPIKE SYSTEM AND NODE GUIDE
17
LED ZEPPELIN PRO MANUAL 500-55R5-01
©2020 Mythgem, LTD.
SWITCH REFERENCE CONTINUED
Figure 3.3.1. Playeld switch locations (top view).
18
SPIKE SYSTEM AND NODE GUIDE
LED ZEPPELIN PRO MANUAL 500-55R5-01 ©2020 Mythgem, LTD.
3.4 LIGHT REFERENCE
Continued on next page...
ID Name Node Node
Ext.
Conn. Ret.
Pin
Ret. Wire Src. Pin Src. Wire Location Type Light
Color
Address Part Number
1 Coin Enable 1 - CN8 6 BLK GRY 2GRY RED Coin Door Digital Out 1-LP-0
2Start Button 1 - CN6 3YEL BRN 1 RED Cabinet Feature White 1-LP-2 113-5071-00
3Tournament Start 1 - CN6 2YEL RED 1 RED Cabinet Feature White 1-LP-3 112-5033-08
4 Lockdown Button-R 1 - CN7 2RED WHT 1 RED Cabinet Feature RGB 1-LP-5 520-5333-00
5 Lockdown Button-G 1 - CN7 3GRN WHT 1 RED Cabinet Feature RGB 1-LP-4 520-5333-00
6 Lockdown Button-B 1 - CN7 4 BLU WHT 1 RED Cabinet Feature RGB 1-LP-7 520-5333-00
7
8
9
10
11 Left Outlane 8b CN1 6 ORG RED 1/2/3 RED Playeld Feature White 8-LP-11 520-5307-00
12 Left Return Lane 8b CN1 7 ORG 1/2/3 RED Playeld Feature White 8-LP-12 520-5307-00
13 Right Return Lane 8b CN3 8BRN YEL 1/2/3 RED Playeld Feature White 8-LP-22 520-5307-00
14 Right Outlane 8b CN3 9BRN BLU 1/2/3 RED Playeld Feature White 8-LP-23 520-5307-00
15 Left Ball Save 8b CN1 8ORG VIO 1/2/3 RED Playeld Feature White 8-LP-13 520-5307-00
16 Shoot Again 8b CN1 10 ORG BRN 1/2/3 RED Playeld Feature White 8-LP-15 520-5307-00
17
18
19
20 FINAL WIZARD MODE 8b CN1 9ORG GRN 1/2/3 RED Playeld Feature White 8-LP-14 520-5307-00
21 SONG WIZARD MODE 8b LED1 - - - - Playeld Feature White 8-LP-8 520-8486-00
22 TOUR WIZARD MODE 8b LED9 - - - - Playeld Feature White 8-LP-16 520-8486-00
23 USA 1977 8b LED19 - - - - Playeld Feature White 8-LP-26 520-8486-00
24 EARLS COURT 8b LED10 - - - - Playeld Feature White 8-LP-17 520-8486-00
25 TOUR MULTIBALL 8b LED20 - - - - Playeld Feature White 8-LP-27 520-8486-00
26 UK 1971 8b LED18 - - - - Playeld Feature White 8-LP-25 520-8486-00
27 USA 1975 8b LED17 - - - - Playeld Feature White 8-LP-24 520-8486-00
28
29
30 JIMMY PAGE-R 8b LED28 - - - - Playeld Feature RGB 8-LP-41 520-8486-00
31 JIMMY PAGE-G 8b LED28 - - - - Playeld Feature RGB 8-LP-42 520-8486-00
32 JIMMY PAGE-B 8b LED28 - - - - Playeld Feature RGB 8-LP-43 520-8486-00
33 JOHN PAUL JONES-R 8b LED26 - - - - Playeld Feature RGB 8-LP-37 520-8486-00
34 JOHN PAUL JONES-G 8b LED26 - - - - Playeld Feature RGB 8-LP-38 520-8486-00
35 JOHN PAUL JONES-B 8b LED26 - - - - Playeld Feature RGB 8-LP-39 520-8486-00
36 JOHN BONHAM-R 8b LED24 - - - - Playeld Feature RGB 8-LP-33 520-8486-00
37 JOHN BONHAM-G 8b LED24 - - - - Playeld Feature RGB 8-LP-34 520-8486-00
38 JOHN BONHAM-B 8b LED24 - - - - Playeld Feature RGB 8-LP-35 520-8486-00
39 ROBERT PLANT-R 8b LED22 - - - - Playeld Feature RGB 8-LP-29 520-8486-00
40 ROBERT PLANT-G 8b LED22 - - - - Playeld Feature RGB 8-LP-30 520-8486-00
41 ROBERT PLANT-B 8b LED22 - - - - Playeld Feature RGB 8-LP-31 520-8486-00
42
43
44 TOUR 1 LOCK 8b LED33 - - - - Playeld Feature White 8-LP-48 520-8486-00
45 TOUR 2 LOCK 8b LED32 - - - - Playeld Feature White 8-LP-47 520-8486-00
46 ICARUS X 8b LED31 - - - - Playeld Feature White 8-LP-46 520-8486-00
47 TOUR 3 LOCK 8b LED30 - - - - Playeld Feature White 8-LP-45 520-8486-00
48 TOUR 4 LOCK 8b LED29 - - - - Playeld Feature White 8-LP-44 520-8486-00
49
50
51 LEFT 2 BANK LOWER 8b CN1 4 ORG GRY 1/2/3 RED Playeld Feature White 8-LP-9 520-5307-00
SPIKE SYSTEM AND NODE GUIDE
19
LED ZEPPELIN PRO MANUAL 500-55R5-01
©2020 Mythgem, LTD.
LIGHT REFERENCE CONTINUED
Continued on next page...
ID Name Node Node
Ext.
Conn. Ret.
Pin
Ret. Wire Src. Pin Src. Wire Location Type Light
Color
Address Part Number
52 LEFT 2 BANK UPPER 8b CN1 5 ORG WHT 1/2/3 RED Playeld Feature White 8-LP-10 520-5307-00
53
54
55 EXTRA BALL 9 a CN4 3GRN RED 1/2 RED Playeld Feature White 9-LP-33 520-8490-00
56 TOUR LOCK 9 a CN4 4 GRN 1/2 RED Playeld Feature White 9-LP-34 520-8490-00
57 LEFT EJECT COMBO 9 a CN4 5 GRN WHT 1/2 RED Playeld Feature White 9-LP-35 520-8490-00
58 LEFT EJECT-R 9 a CN4 6 RED VIO 1/2 RED Playeld Feature RGB 9-LP-36 520-8490-00
59 LEFT EJECT-G 9 a CN4 7GRN VIO 1/2 RED Playeld Feature RGB 9-LP-37 520-8490-00
60 LEFT EJECT-B 9 a CN4 8BLU VIO 1/2 RED Playeld Feature RGB 9-LP-38 520-8490-00
61
62
63 LEFT ORBIT COMBO 9 a LED21 - - - - Playeld Feature White 9-LP-32 520-8489-00
64 LEFT ORBIT-R 9 a LED3 - - - - Playeld Feature RGB 9-LP-12 520-8489-00
65 LEFT ORBIT-G 9 a LED3 - - - - Playeld Feature RGB 9-LP-13 520-8489-00
66 LEFT ORBIT-B 9 a LED3 - - - - Playeld Feature RGB 9-LP-14 520-8489-00
67
68
69 LEFT RAMP COMBO 9 a LED4 - - - - Playeld Feature White 9-LP-15 520-8489-00
70 LEFT RAMP-R 9 a LED1 - - - - Playeld Feature RGB 9-LP-8 520-8489-00
71 LEFT RAMP-G 9 a LED1 - - - - Playeld Feature RGB 9-LP-9 520-8489-00
72 LEFT RAMP-B 9 a LED1 - - - - Playeld Feature RGB 9-LP-10 520-8489-00
73 LEFT LOCK 9 a LED13 - - - - Playeld Feature RGB 9-LP-24 520-8489-00
74
75
76
77
78
79
80
81
82
83
84
85
86
87 (R)OCK 8b CN3 4 BRN RED 1/2/3 RED Playeld Feature White 8-LP-18 520-8487-00
88 R(O)CK 8b CN3 5 BRN ORG 1/2/3 RED Playeld Feature White 8-LP-19 520-8487-00
89 RO(C)K 8b CN3 6 BRN VIO 1/2/3 RED Playeld Feature White 8-LP-20 520-8487-00
90 ROC(K) 8b CN3 7BRN GRY 1/2/3 RED Playeld Feature White 8-LP-21 520-8487-00
91
92
93 (L)ED 9 a CN3 10 ORG VIO 1/2/3 RED Playeld Feature White 9-LP-31 520-8494-00
94 L(E)D 9 a CN3 9ORG BLU 1/2/3 RED Playeld Feature White 9-LP-30 520-8494-00
95 LE(D) 9 a CN3 8ORG GRN 1/2/3 RED Playeld Feature White 9-LP-29 520-8494-00
96
97
98 (Z)EP 9 a CN5 2BRN ORG 1 RED Playeld Feature White 9-LP-43 520-8488-00
99 Z(E)P 9 a CN5 3BRN YEL 1 RED Playeld Feature White 9-LP-44 520-8488-00
100 ZE(P) 9 a CN5 4 BRN GRN 1 RED Playeld Feature White 9-LP-45 520-8488-00
101
102
20
SPIKE SYSTEM AND NODE GUIDE
LED ZEPPELIN PRO MANUAL 500-55R5-01 ©2020 Mythgem, LTD.
LIGHT REFERENCE CONTINUED
Continued on next page...
ID Name Node Node
Ext.
Conn. Ret.
Pin
Ret. Wire Src. Pin Src. Wire Location Type Light
Color
Address Part Number
103 ZEPPELIN BALL LOCK 3 8- CN14 6 BRN GRN 7/8 YEL Playeld Feature Green 8-LP-3 112-5034-04
104 ZEPPELIN BALL LOCK 2 8- CN14 5 BRN YEL 7/8 YEL Playeld Feature Green 8-LP-4 112-5034-04
105 ZEPPELIN BALL LOCK 1 8- CN14 4 BRN ORG 7/8 YEL Playeld Feature Green 8-LP-5 112-5034-04
106
107
108 HERMIT TARGET COMBO 9 a CN2 12 ORG BRN 1/2/3/4 RED Playeld Feature White 9-LP-22 520-5307-00
109 HERMIT TARGET-R 9 a CN2 9RED ORG 1/2/3/4 RED Playeld Feature RGB 9-LP-19 520-5307-00
110 HERMIT TARGET-G 9 a CN2 10 GRN ORG 1/2/3/4 RED Playeld Feature RGB 9-LP-20 520-5307-00
111 HERMIT TARGET-B 9 a CN2 11 BLU ORG 1/2/3/4 RED Playeld Feature RGB 9-LP-21 520-5307-00
112
113
114 CENTER RAMP COMBO 9 a CN3 7ORG YEL 1/2/3 RED Playeld Feature White 9-LP-28 520-8494-00
115 CENTER RAMP-R 9 a CN3 4 RED YEL 1/2/3 RED Playeld Feature RGB 9-LP-25 520-8494-00
116 CENTER RAMP-G 9 a CN3 5 GRN YEL 1/2/3 RED Playeld Feature RGB 9-LP-26 520-8494-00
117 CENTER RAMP-B 9 a CN3 6 BLU YEL 1/2/3 RED Playeld Feature RGB 9-LP-27 520-8494-00
118
119
120 ICARUS TARGET-R 9 a CN2 6 RED BRN 1/2/3/4 RED Playeld Feature RGB 9-LP-16 520-5333-00
121 ICARUS TARGET-G 9 a CN2 7GRN BRN 1/2/3/4 RED Playeld Feature RGB 9-LP-17 520-5333-00
122 ICARUS TARGET-B 9 a CN2 8BLU BRN 1/2/3/4 RED Playeld Feature RGB 9-LP-18 520-5333-00
123
124
125 RIGHT RAMP COMBO 8b CN4 3ORG YEL 1/2 RED Playeld Feature White 8-LP-49 520-5307-00
126 RIGHT RAMP-R 8b CN4 4 RED BRN 1/2 RED Playeld Feature RGB 8-LP-50 520-5333-00
127 RIGHT RAMP-G 8b CN4 5 GRN BRN 1/2 RED Playeld Feature RGB 8-LP-51 520-5333-00
128 RIGHT RAMP-B 8b CN4 6 BLU BRN 1/2 RED Playeld Feature RGB 8-LP-52 520-5333-00
129
130
131 TOP LOCK 9 a CN6 8BRN VIO 1/2/3 RED Playeld Feature White 9-LP-50 520-5307-00
132 RIGHT ORBIT COMBO 9 a CN6 7BRN BLU 1/2/3 RED Playeld Feature White 9-LP-49 520-5307-00
133 RIGHT ORBIT-R 9 a CN6 4 RED GRY 1/2/3 RED Playeld Feature RGB 9-LP-46 520-5333-00
134 RIGHT ORBIT-G 9 a CN6 5 GRN GRY 1/2/3 RED Playeld Feature RGB 9-LP-47 520-5333-00
135 RIGHT ORBIT-B 9 a CN6 6 BLU GRY 1/2/3 RED Playeld Feature RGB 9-LP-48 520-5333-00
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153 Coin Door GI 1 - CN5 2YEL 1 YEL WHT Coin Door G.I. White 1-LP-1 112-5033-08
This manual suits for next models
2
Table of contents
Other Stern Pinball Pinball Machine manuals
Stern Pinball
Stern Pinball WRESTLEMANIA WWE PRO User manual
Stern Pinball
Stern Pinball JAMES BOND 007 PRO User manual
Stern Pinball
Stern Pinball JURASSIC PARK User manual
Stern Pinball
Stern Pinball Batman Premium User manual
Stern Pinball
Stern Pinball FOO FIGHTERS User manual
Stern Pinball
Stern Pinball 500-55L5-01 User manual
Stern Pinball
Stern Pinball NETFLIX STRANGER THINGS Series User manual
Stern Pinball
Stern Pinball KISS PRO User manual
Stern Pinball
Stern Pinball WHOA NELLIE! BIG JUICY MELONS User manual
Stern Pinball
Stern Pinball The Monsters User manual
Stern Pinball
Stern Pinball GODZILLA User manual
Stern Pinball
Stern Pinball GODZILLA PRO User manual
Stern Pinball
Stern Pinball AC/DC User manual
Stern Pinball
Stern Pinball KISS PREMIUM User manual
Stern Pinball
Stern Pinball RUSH LE User manual
Stern Pinball
Stern Pinball JURASSIC PARK PRO User manual
Stern Pinball
Stern Pinball Heavy Metal User manual
Stern Pinball
Stern Pinball BLACK KNIGHT SWORD OF RAGE 500-55N1-01 User manual
Stern Pinball
Stern Pinball VENOM LE User manual
Stern Pinball
Stern Pinball MANDALORIAN User manual
