Stirling IA3744 User manual

PREMIUM GARMENT STEAMER
& FABRIC SHAVER
QUICK START GUIDE

2. Turn On
Getting Started:
This quick start guide only contains brief and basic information, please refer to the instruction manual for full
instructions on how to safely use the Premium Garment Steamer and Fabric Shaver.
IA3744
1 Year
1300 777 137
Northern Droplet, Niagara Mist
Model
Colours
Warranty
After Sales Support
1. Fill the Water Tank 4. Turn O and Store
Place the Garment Steamer on a
flat, dry, heat resistant surface. Plug
into a power outlet and turn on.
The heating indicator light (orange
light) will illuminate, indicating the
Garment Steamer is on and in the
process of heating up.
When finished steaming, release
the steam button ( button).
Switch o and unplug from the
power outlet. Allow the unit to cool
completely. Store the Garment
Steamer in the protective pouch.
Using the measuring cup, measure
85ml of water. Detach the water tank
from the Garment Steamer, open the
plug and pour the water into the tank.
Close the plug and attach the water
tank to the Garment Steamer.
3. Steam
When the Garment Steamer is ready for
use, the ready indicator light (green light)
will illuminate. Place the steam plate
against the fabric. Press and hold the
steam button ( button) and move the
Garment Steamer in an upward and
downward motion to remove the creases.
2. Power On and Shave1. Charge 4. Clean and Store
Place the garment on a flat, dry, stable
surface. Remove the magnetic cover.
Press the button to turn the Fabric
Shaver on. Using light pressure, circle
the area intended for maintenance.
Refer to page 19 for the full
instructions on how to clean the
Fabric Shaver. Store the Fabric
Shaver in the protective pouch.
Place the Fabric Shaver on a flat, dry,
stable surface. Connect the USB cable
to the Fabric Shaver. When the
button illuminates green, the Fabric
Shaver is ready for use.
3. Power O
When finished, press the
button to turn the Fabric Shaver o.
NOTE: Do not overfill the water tank as this will aect the operation of the
Garment Steamer.
WARNING: Never use the Garment Steamer without water in the water
tank. Do not remove the water tank when the Garment Steamer is in
operation.
WARNING: Take care when removing the mesh blade cover as the razor
blades on the blade attachment are extremely sharp!
CAUTION: Do not attempt to operate the Fabric Shaver without the mesh
blade cover and lint catcher correctly and securely attached.
NOTE: The Garment Steamer will take approximately 25-30 seconds to heat up.
WARNING: Steam can scald. Take care to avoid contact with any steam
emitted from the Garment Steamer when in use. Keep all body parts,
including hands and feet away from escaping steam. Never turn the
Garment Steamer upside down when it is in use.
NOTE: The Fabric Shaver will take approximately 3-4 hours to fully charge.
NOTE: Only clean the lint catcher, mesh blade cover and blade attachment
with the cleaning brush provided. Never immerse these parts in water or
any other liquid.
v1.1