Crosley Slone CR7022A User manual

CR7022A
Slone Shelf System
Instruction Manual
Questions, problems, missing parts?
Before returning to the store, call Customer Service
8 a.m. –6 p.m., EST, Monday –Friday
1-888-CROSLEY
www.crosleyradio.com

English
2
Safety Instructions
Read and understand this entire manual before using this product. Keep these
instructions for future reference.
1. Do not use this product near water.
2. This product should be operated only by the type of power source indicated
on the marking label or in this instruction manual.
3. Do not defeat the safety purpose of the polarized plug. A polarized plug has
two blades with one blade wider than the other. This plug will fit into the
power outlet only one way. If you are unable to insert the plug fully into the
outlet try reversing the plug. If the plug should still fail to fit, contact your
electrician.
4. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the product.
5. Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
6. Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the product.
7. Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
8. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
9. Do not use attachments not recommended by the product manufacturer as
they may cause hazards.
10. A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
11. Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating. Do not
block or cover these openings.
12. Unplug the product during lightning storm or when unused for long periods of
time.

English
3
Items in this package
Before throwing away any packaging materials, please check thoroughly and
make sure you find the following items that come along with this package:
•Turntable
•45 RPM adapter
•Power adaptor
•Speakers
Please contact Crosley customer service if there is any accessory missing from
the package. Retain the original packaging materials for exchange or return
purposes.
Specifications
Power AC power adaptor, DC output 12V 1A
Power consumption 12 W
Speaker 3”4Ω5W x 2
Turntable speed 331/3, 45, 78 RPM
Replacement needle Crosley NP16
Frequency Range 87.5 MHz –108 MHz
Note:
•Design and specifications are subject to change without notice.
•To help save power consumption, some models will comply with ERP energy
saving standard. When there is no audio input for 20 minutes, power will
automatically cut-off. To turn power back on and resume playing, you will need to
turn off the power and turn it on again.

English
4
Product Description
1. Speakers
2. Aux In Jack
3. Power/Mode Button
4. USB Jack
5. Backward Skip Button
6. Record Button
7. Forward Skip Button
8. Play/Pause Button
9. Volume Knob
10.Display Screen
11.Speaker Jacks
12.FM Antenna
13.Aux Out Jack
14.Power Jack

English
5
15.Turntable Platter
16.Turntable Spindle
17.45 RPM Adapter
18.Tonearm Lever
19.Auto Stop Switch
20.Tonearm
21.Speed Switch
22.Tonearm Clip
Initial Setup
Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect the Speakers to the Speaker Jacks on the back of the unit.
3. Remove the tie-wrap that is holding the tonearm.
4. Connect power adaptor to the Power Jack of the unit.
5. Long press the Power button to turn the unit on and off.
Note: Do not plug the AC power adaptor to power outlet before all the assembly is
completed. Before turning the power on, make sure again all the connection settings
are correct. Always turn off the power when connecting or disconnecting.

English
6
Auxiliary Connections
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speakers. To do this, connect the 3.5mm auxiliary cable (not included) between
your audio device, and the Aux In Jack of this unit, press the Mode Button until
AUX Mode is selected and start playing the music.
1. To pause the playback, short press the Pause button. Adjusting the volume
will resume playback.
Aux Out Connection
1. If needed, first insert one end of the 3.5mm auxiliary cable (not included) into
the AUX Input jack on your powered speakers according to their user manual.
2. Insert the other end of the 3.5mm auxiliary cable into the AUX Output jack on
the unit.
FM Radio Operation
1. Short press the Mode Button until a radio station is displayed on the Display
Screen.
2. Once in FM mode, press the PLAY/PAUSE button on the unit to start the
automatic station search. Once completed the stations will be preset.
3. Short press the Forward and Backward Skip Button to change the preset
radio station.
Turntable Operation
1. Short press the Mode Button until “PHON” is displayed on the Display
Screen.
2. Set the Speed Switch accordingly.
3. Place the record on the turntable. Use the 45 RPM Adapter if necessary.
4. Remove the stylus protector from the stylus assembly.
Note: To avoid stylus damage, make certain the included stylus guard is in place
whenever the turntable is being moved or cleaned.
5. Release the Tonearm Clip.
Note: when the turntable is not in use, remember to lock back hold down clip.
6. Use the Tonearm Lever to lift the tonearm.
7. Gently move the tonearm over the record where play is desired to begin. Set
the Tonearm Lever back to the down position. The tonearm will descend
slowly onto the record and begin playback.

English
7
8. When the record is finished playing, use the Tonearm Lever again to raise the
tonearm and then return it to the Tonearm Rest. Release the lever to let the
tonearm sit back at its rest. To suspend playback, repeat the same steps.
9. Lock the Tonearm Clip to secure the tonearm.
Platter Auto-stop
If the Auto-stop Switch is set to ON position, the platter will stop spinning
automatically when the record plays to the end. In some rare occasion, if the
turntable stops playing before the end of the record, set the switch to OFF
position the turntable should overcome this issue.
Needle Replacement
Removing Needle
1. Gently pull down the front edge of the needle.
2. Pull needle forward.
3. Pull out and remove.
Installing Needle
1. Position the needle with its tip facing down.
2. Line up the back of the needle with the cartridge.
3. Insert the needle with its front end at a downward angle and gently lift the
front of the needle upward until it snaps into place.
Bluetooth Operation
1. Short press the Mode Button until “bt” is displayed on the Display Screen.
2. Turn on the Bluetooth feature of your audio device, search for “CROSLEY
CR7022A” and pair.
3. Once your device is successfully paired with the unit, you will hear a short
confirmation sound from the unit.
4. Play and stream music from your device to the unit.

English
8
5. To forward skip, press the Forward Skip Button in and release.
6. To backward skip, press the Backward Skip Button in and release.
7. To pause the playback, short press the Pause button.
8. Press and hold the Play/Pause button to disconnect the Bluetooth.
Note: Bluetooth version –5.0
Bluetooth Output Operation
This turntable features Bluetooth output which is a device that transmits audio
from this turntable to another Bluetooth device such as wireless Bluetooth
headphones, Bluetooth speakers, or other Bluetooth receiving devices.
1. Place the audio device that supports Bluetooth technology as close to your
turntable as possible.
2. Short press the Mode Button until “bt-O” is displayed on the Display Screen.
3. Set the device that you would like to connect to pairing mode.
4. Your turntable will connect automatically to your audio device once they are
both in pairing mode.
Note: If pairing is unsuccessful, make sure your audio device is not paired/connected to
another Bluetooth device.
USB Playback
1. Insert a USB device into the USB port and the unit will start playback
automatically.
2. To skip to the next or previous track, press the Forward Skip or Backward
Skip button correspondingly.
3. During the playback, press the Play/Pause button to pause. Press it again to
resume playback.
Note: Only use 32 GB or smaller USB.
USB Recording
You can record the turntable record to a USB device.
1. Insert a USB flash stick to the USB port.
2. Short press the Mode button until “PHON” is displayed on the Display Screen.
3. Short press the Record button while the phono record is playing.
4. Short press Record button again to stop the recording.
5. To delete the recorded track, long press the REC button during playback.
Note: Only use 32 GB or smaller USB.

English
9
Turntable Maintenance
1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the
turntable mat or a record’s edge.
2. Clean the stylus frequently with a soft brush with a back-to-front motion only.
3. Clean the records with a record cleaning brush and record cleaning solution
to get rid of dust or grease.
4. Clean the turntable lid and turntable cabinet with a slightly damp microfiber
cloth.
Note: Do not use cleanser that contains alcohol, benzene, or any other harsh chemicals
that can damage the paint and finish of the turntable.
** Crosley offers a product line of different cleaning accessories. Please
ask your retailer or check out our website www.crosleyradio.com for
more cleaning product information.
Troubleshooting
There is no power
•Power adaptor is not connected correctly.
•No power at the power outlet.
•To help save power consumption, some models will comply with ERP energy
saving standard. When there is no audio input for 20 minutes, their powers
will automatically cut-off. To turn power back on and resume playing, turn off
the power and turn it on again.
Turntable is spinning, but there is no sound, or sound is not loud enough
•Stylus protector is still on.
•Tone arm is lifted by the lever.
Bluetooth not connecting
•Forget the device then try connecting again.
•Ensure you are not too far away from unit when connecting.
•Power cycle both devices and try steps to connect again.

English
10
FCC Statements
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
−Reorient or relocate the receiving antenna.
−Increase the separation between the equipment and receiver.
−Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
−Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly
approved by the party responsible for compliance. such modifications could void the user's
authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, the distance must be at least
20 cm between the radiator and your body, and fully supported by the operating and
installation configurations of the transmitter and its antenna(s).
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Modern Marketing Concepts Inc. dba Crosley Brands, declares that the radio
equipment type is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://crosleybrands.com/euDoC