Streetwize SWDG2 User manual

Universal Dog Guard
Please read the instructions carefully before any use of this product, and retain for future reference.
Fully height adjustable with specially designed extending side panels,
suitable for most Hatchbacks, Estates & 4x4’s.
Width adjusts from 91cm - 151cm
Height adjusts from 81cm - 133cm
SWDG2
SWDG2 Manual AW 2019.qxp_Layout 1 13/03/2019 11:40 Page 2

1. Arrange the wire mesh assembly (parts 1 and 2-(x2)) to the
appropriate size to fit the width of the vehicle and secure using the
clips (5)-x4 supplied as in (Diagram 1 - opposite).
2. Add the end caps supplied (4)-x4 to the ends of the support bars
(Diagram 2 - opposite).
3. When assembled, connect the support bars (3) to the wire mesh
assembly, using the 4 clips (6) on each support bar (Diagram 3
- opposite), and tighten using a phillips screwdriver (not supplied).
4. Adjust the height of the support bars to the approximate height of
the vehicle floor and roof and tighten adjustable screw (7) to secure.
5. Place in the vehicle as shown in the image on the front of these
instructions, adjust the extending screws (8) to tighten the support
bars securely to the roof & floor of the vehicle.
6. If using dog guard for a prolonged period, regularly check all fittings
and tighten as necessary.
(1)
(2)
(3)
(3)
(4)
(4) (4) (4)
(5)
(2)
SWDG2 Manual AW 2019.qxp_Layout 1 13/03/2019 11:40 Page 3

Diagram 3
Diagram 2Diagram 1
(7)(7)
(6)
(6)
(4)
(5)
(8) (8)
(6)
(6)(6)
SWDG2 Manual AW 2019.qxp_Layout 1 13/03/2019 11:40 Page 4

Streetwize Accessories: Unit 1, Royce Trading Estate,
Ashburton Road West, Trafford Park, Manchester M17 1RY
Sales enquiries: [email protected]
Technical enquiries: [email protected]
Telephone: [phone] www.streetwizeaccessories.com
SWDG2 Manual AW 2019.qxp_Layout 1 13/03/2019 11:40 Page 1