Streetwize SWMAS3 User manual

12V Heating & Cooling
Car Seat Cushion
Thank you for purchasing this 12V Heating & Cooling Car Seat Cushion from
Streetwize. This car seat cushion is intended for use inside a vehicle on either
the front driver or passenger seat. Its dual-action functionality allows it to provide
either a cooling or warming effect, making it suitable for all year round use.
This car seat cushion is universal in design and will fit most vehicle’s driver’s
seat and front passenger’s seat, as long as the vehicle has an accessible 12V
socket. This includes hatchbacks, estates, saloons, MPVs, 4x4s, SUV, lorries,
trucks and more.
BEFORE USING THIS PRODUCT, WE HIGHLY RECOMMEND THAT YOU READ ALL THE
INFORMATION IN THIS MANUAL. PLEASE KEEP THIS DOCUMENT FOR FUTURE REFERENCE.
SWMAS3

Product Elements
• Streetwize 12V Heating & Cooling Car Seat Cushion
• 12V power cable
Installation Instructions
The seat cushion is simple to fit.
On the reverse side of the seat cushion, you will find a quick release buckle strap near the top,
which is to be secured to your vehicle’s headrest, and another quick release buckle strap in
the middle to be secured around the back of your vehicle’s seat.
As for the two hook straps on either side of the ventilator fan, situated at the reverse side of
the cushion at the bottom, these should be secured onto a railing underneath the vehicle seat.
Operating Instructions
To operate the car seat cushion, first plug it into your vehicle’s
12V socket. Then switch on your vehicle so you are able to set
the seat cushion’s heating or cooling settings via the control
panel (Figure 1).
Auto Shut-Off
Heating: Auto shut-offs after 50 minutes
Cooling: Auto shut-offs after 2 hours
Fig 1
Button Heat Button Cool Button
First Press High heat setting (3 LED lights) High cool setting (3 LED lights)
Second Press Mid heat setting (2 LED lights) Mid cool setting (2 LED lights)
Third Press Low heat setting (1 LED lights) Low cool setting (1 LED lights)
Fourth Press Off Off

Health & Safety Guidelines
1. Never leave the seat cushion unattended when turned on.
2. Never fold the seat cushion when turned on.
3. This product is not a toy. Please make sure children are supervised at all times when they
are near the product.
4. Avoid spillaging any liquids on any component of the seat cushion. This includes the 12V
power cable and cooling ventilator.
5. Do not use this product for anything other than its intended use.
Technical Support
If you require any technical support for your product within the warranty period,
please contact us on:
[email protected]
and provide the product name and supplier code (see Technical Specifications)
along with the technical query and proof of purchase.
Technical Specifications
Product Name
Supplier Code
Voltage
Heating Power
Cooling Power
Materials
Dimensions
Streetwize 12V Heating & Cooling Car Seat Cushion
SWMAS3
12V
1.5A, 10W
0.8A, 10W
Mesh fabric and PVC (30%), sponge (5%), oxford fabric (10%),
PVC with alloy wire (5%), PE plastic (30%), silicone pad (10%), ABS fan (10%)
Back rest: 60cm x 49cm
Base: 47cm x 50cm
Vent mesh over fan: 31cm x 19

www.streetwizeaccessories.com
Streetwize: Ashburton Road West, Trafford Park, Manchester, M17 1RY
For Product Support:
E: suppor[email protected]
T: [phone]
For Trade Enquiries:
E: [email protected]
T: [phone]
EU Registered Address: Ace Supply Co
(Europe) Ltd, 25 Herbert Place, Dublin 2,
D02 A098 Republic of Ireland.
CHECK OUT OUR EXTENSIVE RANGE WITH
OUR EASY-TO-FOLLOW PRODUCT VIDEOS
Visit our website: www.streetwizeaccessories.com
Follow us on social media
We have over 1000 car and leisure products in our range
“Streetwize”
View this manual online
streetwize.online/SWMAS3