Streetwize SWCRT User manual

Cargo Roof Tray
Thank you for purchasing this Cargo Roof Tray from Streetwize.
This product is intended for use as an additional storage option for
vehicles. It is ideal for oversized items or items that are awkwardly
shaped. This Cargo Roof Tray is suitable for family weekend getaways,
road trips, staycations and off road adventures.
Please Note: This Cargo Roof Tray is designed to fit onto the roof bars
(not included). Please ensure your vehicle is fitted with suitable roof
bars. There should be a minimum of 700mm between each roof bar.
Also, please check the maximum load capacity of your vehicle.
Important: To ensure safe and secure fit of the roof cargo tray to your
vehicle’s roof bars, the roof bars should have a max width of 93mm,
and max height of 33mm.
Before using this product, please read through all the information and
health & safety guidance in this document.
SWCRT

2
Contents
Elements For Assembling Roof Tray
Elements For Attaching Roof Tray To Roof Bars
Roof Tray Assembly Instructions
Attaching The Roof Tray To Your Vehicle’s Roof Bar
Health & Safety Guidelines
Spare Parts
Technical Specification
3
4
4
3
3
3
3

3
Elements For Assembling Roof Tray
1
2
3
4
5
6
7
8
9
10
Main frame of roof basket 1
Main frame of roof basket 2
Metal plate for front of roof tray
Half saddle washer
Metal spacer tube
Lock Nut (M8)
Screw (M8)
Screw (M6)
Lock Nut (M6)
Washer (M6)
Number Diagram Description

4
Elements For Attaching Roof Tray To Roof Bars
Roof Tray Assembly Instructions
1
2
3
4
Washer (M6)
U Bolt
Securing Nut
Securing Plate
Number Diagram Description
FIGURE 1
1. Firstly, remove all the product elements from its packaging and dispose of the packaging in
the correct manner.
2. Assemble the half saddle spacers (4) onto the each end of metal spacers (5). Ensure this
is done for all 6 metal spacers.
3. With the M8 screws (7), insert each of them into the pre-drilled holes on the top roof basket
frame (1) (see Figure 1). Then thread each of the assembled metal spacers on to the M8
screw (7).

5
4. Then, carefully place the top roof frame basket frame (1) upside down on the floor, with the
threaded assembled metal spacer facing upwards.
5. With the base steel mesh tray (2), align the screws coming through metal spacers with the
pre-drilled holes on the base tray. Then thread the screws through the pre-drilled holes.
The ends of the screws should come through the other end of the base tray.
6. Affix the washers (10) and lock nuts (9) to the bottom of each of the M8 screws (7) on the
base tray (2). You will need a spanner to secure into place (not included).
7. Once done, turn the frame rightside up.
8. Then get the metal plate (3) and align it onto the pre-drilled hold at front of the newly
assembled frame (see Figure 2).
9. Once the plate (3) has been aligned with the pre-drilled holes, feed the M6 screws (8)
through each of the holes, and then secure and fasten in place with the washer (10)
and nut (9) using your spanner (not included). Figure 3 shows the roof tray being fully
assembled.
FIGURE 2
FIGURE 3

6
Attaching The Roof Tray To Your Vehicle’s Roof Bar
Important: To safely attach the roof tray to your vehicle, you will need TWO people to lift the
tray and position onto your vehicle. This helps to prevent any damage/scratches to your
vehicle. Also, before fitting the roof tray, please ensure the roof bars are fitted onto your
vehicle and there should be a minimum of 700mm between each bar (see Figure 4).
FIGURE 4
FIGURE 5
1. Carefully place and position the roof tray onto your vehicle’s roof bars (two people required).
2. Then, with the four U Bolts (12), place them through the wire mesh tray onto the roof bars
as shown in Figure 5. Place two on each of the roof bars.
3. To secure in place, use the securing plates (14) and fasten each plate onto U bolt on the
underside of the roof rack using the provided washer (14) and securing nuts (13).

7
Technical Specfications
Product Name
Supplier Code
Maximum Load
Dimensions
Material
Streetwize Cargo Roof Tray
SWCRT
65Kg
120cm x 97cm x 13.5cm
Heavy Duty Steel
Health & Safety Guidelines
Spare Parts
If you require any technical support or spare parts for your product within the warranty
period, please contact us on suppor[email protected] and provide the
product name and supplier code (see Technical Specifications) along with the
technical query and proof of purchase.
• When placing load onto the roof tray, ensure the load is evenly distributed. Never place all
the load onto one one side of the tray.
• Use suitable luggage straps or luggage ties to secure the load in place inside the tray.
• Do not exceed the maximum load capacity of 65kg.
• Never stand on the roof tray.
• Do not place the roof tray on top of your vehicle without the roof bars fitted. Risk of
damage/scratch to your vehicle.
• Never exceed the maximum speed of 110mph with load in the roof tray.
• Ensure there is a gap of atleast 700mm between each of the roof bars.
• When lifting or removing the roof tray, ensure two people are involved.

www.streetwizeaccessories.com
Streetwize: Ashburton Road West, Trafford Park, Manchester M17 1RY
For Product Support:
E: suppor[email protected]
T: [phone]
For Trade Enquiries:
E: [email protected]
T: [phone]
EU Registered Address: Ace Supply Co
(Europe) Ltd, 25 Herbert Place, Dublin 2,
D02 A098 Republic of Ireland.