Streetwize SWMAT1 User manual

SWMAT1
Inflatable
Car Mattress
Inflatable backseat car mattress1
Inflatable pillows (x2)2
Inflatable support base3
12V inflator/deflator pump4
3-in-1 valve5
Repair kit6
Carry bag7
Fig 2.
Fig 1.
INFORMATION FOR USE
Thank you for purchasing this Inflatable Backseat Car Mattress from Streetwize. This product is intended for
sleeping one person in your car's back seat. It comes with two inflatable pillows as well as an inflatable
support base that is placed in your vehicle’s foot wells.
To get best use of this product, we recommend that you read all the information and health & safety
guidelines in this document.
PRODUCT ELEMENTS
12V INFLATOR/DEFLATOR PUMP INSTRUCTIONS
The air mattress & pillows and support base can all be inflated with the
provided 12V inflator/deflator pump (Fig 1).
Ensure you use the correct valve attachment for the component you want to
inflate. Also, please ensure you use the inflation outlet on the pump (Fig 2).
To commence inflation, connect the pump to your vehicle’s 12V socket and
start your vehicle. Then ensure the pump is properly connected to the air
valve and switch on the pump.
Inflate all components until they are firm.
SWMAT1 Manual 2020 AW.qxp_Layout 1 01/02/2021 13:43 Page 2

Streetwize: Ashburton Road West, Trafford Park, Manchester M17 1RY
For product support: E:[email protected]
T: [phone]
For trade enquiries: E: [email protected]
T: [phone]
For spare parts: E: [email protected]
or contact us on our online form: www.streetwizeaccessories.com
EU Registered address: The Ace Supply Co (Europe) Ltd, 25 Herbert Place, Dublin 2, D02 A098 Republic of Ireland.
Over 1000 car & leisure products in our range. To find out more follow us onsocial media.
PLACING THE MATTRESS IN YOUR VEHICLE
When placing the air mattress in a vehicle, move the front seat forward as far as they will go. Place the
support base in the footwells between the rear and front seats. Then position the air mattress into your
vehicle, followed by the pillows.
DEFLATION INSTRUCTIONS
To deflate the air mattress, attach the appropriate valve attachment to the deflator inlet. Connect the pump
to your 12V socket as before then switch on the pump to begin deflation. For deflating the pillows, please
deflate the pillows by hand.
PACKING/STORING THE AIR MATTRESS
When packing & storing the air mattress and its inflatable components, always fold and place back into the
supplied carry bag with the valves open. This allows for any excess air inside the inflatable to come out.
REPAIRS
This product comes with a repair kit. This kit is ideal for repairing small punctures. The kit includes 2 small
patches and a plastic straw.
To repair the small punctures, please see the instructions below.
Inflate the mattress or one of the pillows to locate the puncture.
Once located, clean the area with a suitable cleaning solution
Using the plastic straw, apply heat (i.e. a gas hob lighter) to melt one end of the straw. Then, apply the
melted plastic over the puncture to seal it.
Allow for the plastic to dry and cool, then clean with a suitable cleaning solution.
The small patches are suitable for covering slightly larger punctures. For this, you will need a strong adhesive
like super glue (not included) to bond the patch.
TECHNICAL SUPPORT
If you require any technical support, please contact us on [email protected] and provide
the product name and supplier code (see Technical Specifications) along with the technical query and proof
of purchase.
TECHNICAL SPECIFICATION
Product name Streetwize Inflatable Car Mattress
Supplier code SWMAT1
Material PVC
Pump input voltage 12V DC
Mattress size 130cm x 74cm x 32cm (including gap barrier)
SWMAT1 Manual 2020 AW.qxp_Layout 1 01/02/2021 13:43 Page 1