English
ContEnts
Page
1.1 General notes on safety .......22
1.2 Use of the machine for
pUrposes for which it is
intended ..................................22
1.3 incorrect Use .........................22
1.4 ec declaration of conformity
................................................22
2.1 prior to takinG the machine into
service ....................................22
2.2 takinG the machine into service
................................................22
2.3 ratinG data..............................22
2.4 operatinG conditions .............23
3.1 protective devises..................23
3.2 GrindinG tools........................23
3.3 workinG instrUctions.............23
4.1 preventive maintenance..........24
4.2 spare parts.............................24
4.3 repair......................................24
4.4 warranty ................................24
4.5 storaGe ..................................24
4.6 disposal / environmental com-
patibility ..................................24
Table des maTières
Français
Page
1.1 instrUctions Générales de
sécUrité...................................18
1.2 Utilisation conforme àla desti-
nation......................................18
1.3 Utilisation contraire àla desti-
nation......................................18
1.4 déclaration de conformité ce
................................................18
2.1 avant la mise en service .........18
2.2 mise en service .......................18
2.3 performances.........................18
2.4 conditions d’exploitation .......19
3.1 dispositifs de protection .......19
3.2 oUtils de polissaGe ................19
3.3 indications de travail..............19
4.1 maintenance préventive..........20
4.2 pièces de rechanGe.................20
4.3 réparation ..............................20
4.4 prestation de Garantie ...........20
4.5 entreposaGe ...........................21
4.6 elimination / capatibilité envi-
ronnementale..........................21
Deutsch
InhaltsverzeIchnIs
Seite
1.1 allGemeiner sicherheitstech-
nischer hinweis.......................14
1.2 bestimmUnGsGemässe
verwendUnG............................14
1.3 nicht bestimmUnGsGemässe
verwendUnG............................14
1.4 eG-konformitätserklärUnG
(oriGinal)................................14
2.1 vor der inbetriebnahme..........14
2.2 inbetriebnahme........................14
2.3 leistUnGsdaten .......................14
2.4 betriebsbedinGUnGen..............15
3.1 schUtzvorrichtUnGen ............15
3.2 schleifwerkzeUGe ..................15
3.3 arbeitshinweise.......................15
4.1 vorbeUGende instandhaltUnG.16
4.2 ersatzteile..............................16
4.3 reparatUr ...............................16
4.4 GarantieleistUnG....................16
4.5 laGerUnG ................................16
4.6 entsorGUnG / UmweltverträG-
lichkeit....................................16
10
