Summer 29350 User manual

INSTRUCTION MANUAL
Please read the following
instructions and warnings carefully.
Keep this instruction manual
for future reference.
Tools required for wall mount:
Screwdriver and drill (not included)
For technical support see back page.
For adult use only.
WARNING:
Adult assembly required. Keep small parts
away from children when assembling .
29350
STRANGULATION HAZARD - Children have STRANGLED in cords.
Keep this cord out of reach of children (more than 3 feet (0.9 m)
away from the crib). Use enclosed Security Clips to help secure cord
away from baby’s reach. Never use extension cords with AC Adapters.
Only use the AC Adapters provided.
WARNING:
BABY GLOW™ VIDEO MONITOR
& PROJECTION CAMERA
12
© 2015 Summer Infant, Inc.
Colors and styles may vary. Please retain information for future reference.
MADE IN CHINA. 11/15
Summer Infant stands behind all of its products. If you are not completely
satisfied or have any questions, please contact our Consumer Relations
Team at 1-800-268-6237 or www.summerinfant.com/contact
www.summerinfant.com
Summer Infant Canada, Ltd.
200 First Gulf Blvd., Unit C
Brampton, Ontario,
Canada L6W 4T5 905-456-8484
Summer Infant, Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-800-268-6237
If you experience a problem that is not noted in this manual, please do not return
the product to the store. Our Consumer Relations Team may have a simple solution
to your problem. Please contact us at 1-800-268-6237 or email us at
summerinfant.com/consumer-care/contact-us.
Summer Infant, Inc. Monitor Warranty Policy
Summer Infant, Inc. will repair or replace (at our option) your unit free of charge for 12 months
from the date of purchase if the unit is defective in workmanship or materials. To claim your
repair/replacement, the product must be returned to Summer Infant along with a copy of the
original purchase receipt. In the absence of the purchase receipt, the warranty will be 12
months from the date of manufacture. This warranty does not apply to normal wear or damage
from misuse, abuse, improper storage and handling, installation, accident, unauthorized repair
or alteration. Please contact our Customer Service Department by phone at 1-800-268-6237
or via e-mail at summerinfant.com/consumer-care/contact-us for details.
For sale and use in the USA and Canada. The warranty is null and void if used outside its
intended territories.

WARNING:
THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.
•STRANGULATION HAZARD - Children have STRANGLED in cords. Keep this cord
out of reach of children (more than 3 feet (0.9 m) away from the crib). Use
enclosed Security Clips to help secure cord away from baby’s reach. Never use
extension cords with AC Adapters. Only use the AC Adapters provided.
•When an AC Adapter is plugged into an electrical outlet, do not touch the exposed
end.
•Test monitor before first use, periodically, and when changing location of the
Camera.
•Do not use monitor near water (such as bathtub, sink, etc.).
•Keep monitor away from heat sources (such as stoves, radiators, etc.).
• Make sure there is proper ventilation around all monitor components. Do not
place on sofas, cushions, beds, etc. which may block ventilation.
• This product is not a toy. Do not allow children to play with it.
• This product contains small parts. Adult assembly required. Exercise care when
unpacking and assembling the product.
BATTERY WARNING:
• Use only the original rechargeable battery provided. Please contact Summer
Infant, Inc. for replacement battery. Contact information can be found on page 12
of these instructions.
• Clean battery and product contacts prior to battery installation.
• Do not short-circuit supply terminals.
• Only the recommended battery or equivalent are to be used, volts and size.
• Remove battery when product is stored for long periods of time or when battery is
exhausted.
• Dispose of exhausted battery properly.
• Keep all batteries away from children.
211
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation.
CAUTION: Changes or modifications not expressly approved by Summer Infant may void the
users authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiver
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement
The device is compliance with RF exposure guideline , users can obtain
Canadian information on RF exposure and compliance. Le présent appareil est conforme
Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF, les
utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance
d’acquérir les informations correspondantes

x1 x1x1x6
x2
Adapters, Hardware & Battery:
FEATURES & COMPONENTS:
MONITOR:
CAMERA (Back View):CAMERA:
3
Code
Button
AC Adapter Jack
(on bottom of unit)
Power On/
Off Switch
Lullabies
On/Off
Projection
On/Off
Camera
Lens
Microphone
Nighttime
LEDs
(for darkened
room)
Projection Lights
Power On
LED
/Menu
Power & Low
Battery LED
(Light will illuminate
amber when battery
is low)
Volume
Control
Sound
Lights
Video On/Off
Battery
Life/Signal
Strength
Indicators
Projection On/Off/
Left Arrow
Lullabies/
Right Arrow
Up Arrow
Down Arrow
Microphone
Digital Zoom/Select
Talk-Back
Speaker
Battery Compartment
Kickstand
AC
Adapter
Jack
Zoom
Indicator Projection Lights
Indicator
Lullabies
Indicator
NOTES:
10

9
IMPORTANT SAFETY
INSTRUCTIONS
1) Read Instructions - All the safety and operating instructions should be read before the product is operated.
2) Retain Instructions - The safety and operating instructions should be retained for future reference.
3) Heed Warnings - All warnings on the product and in the operating instructions should be adhered to.
4) Follow Instructions - All operating and use instructions should be followed.
5) Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
6) Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7) Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8) Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious
injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer's instructions, and should use a
mounting accessory recommended by the manufacturer.
9) Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surfaces. This product should not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10) Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not
sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate
from battery power, or other sources, refer to the operating instructions.
11) Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the
product.
12) Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits as contact with them might be fatal.
13) Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or
electric shock.
14) Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
15) Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
16) Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions. Adjusting only those controls that are covered by
the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicated a need for service.
17) Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by
the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or
other hazards.
18) Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
19) Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
20) Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products including
amplifiers) that produce heat.
DO NOT EXPOSE TO RAIN OR MOISTURE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
STRANGULATION HAZARD - Children have STRANGLED in
cords. Keep this cord out of reach of children (more than 3
feet (0.9 m) away from the crib). Use enclosed Security Clips
to help secure cord away from baby’s reach. Never use
extension cords with AC Adapters. Only use the AC Adapters provided.
WARNING:
SETUP & USE:
Testing Initial Setup:
Before using the monitor, charge the battery for 5-6 hours. To
set up the system, you will need two adults. One adult should
view the picture on the monitor while the other is in the nursery
to adjust the camera. Often the quality of the reception can be
improved by slightly repositioning the camera or the monitor. If
may help to place an object in the crib to simulate the position
and size of your baby.
Step 1: To test reception, determine a location for the
camera that will provide the best view of your baby in the
crib (note: do not mount camera in permanent location
until initial set up test completed). Plug AC adapter into wall
outlet and turn camera power on.
Step 2: Press and hold /MENU button on monitor for 5-seconds
until the Summer logo appears on screen. Video should
immediately appear on screen. If video does not appear, go to
“Pairing or Adding a Camera” section (pg. 5).
If video appears, the initial set up test is complete.
Installing Camera:
Place the camera on a flat surface, such as a bureau or shelf
(Fig A) or mount the camera on a wall (Fig B). NEVER place
the camera or cords within 3-feet of the crib. Secure the
cord to the wall using the 6 security clips included to keep
the cord away from baby’s reach.
To Wall-Mount Camera:
Step 1: Pre-drill a hole in the wall, a 3/16” (4.8mm) drill bit
(Fig C).
Step 2: Insert the wall anchor (included) into the hole and with a
hammer, tap gently on the end until the wall anchor is flush with the
wall.
Step 3: Insert the screw (included) into the wall anchor and tighten
screw until only ¼” (6.2mm) of the screw is exposed.
Step 4: Insert camera AC adapter into the camera’s AC adapter jack.
Step 5: Slide the back of the camera down onto the screw until the
camera is secure to the wall.
Step 6: Plug the AC adapter into a standard electrical outlet.
Step 7: Secure the cord to the wall using the 6 security clips included
to keep cord away from baby’s reach. (Figures B & D) D
C
B
A
4

8
No picture or sound
• Make sure the camera and handheld monitor unit are paired (see page 5)
• Make sure the camera and handheld monitor unit are turned on
• Make sure the AC adapters are plugged in
• Make sure the outlets are working
Sound but no picture
• Press the Quick View/Video On-Off Button once to turn on video mode
• Check to make sure nothing is blocking the camera
• Test reception by moving the handheld unit and/or camera to different locations
• Make sure the camera and handheld monitor unit are paired (see page 5)
Picture but no sound
• Power the handheld completely off, remove and re-insert the battery, then turn handheld back on.
• Turn up the volume using Volume Control
• Make sure the camera and handheld monitor unit are paired (see page 5)
Picture not clear
• Position the handheld unit closer to the camera
• Move the handheld unit away from other electronic devices, cordless phones, etc.
• Adjust the brightness using the Brightness Control
• Test reception by moving the handheld unit and/or camera to different locations
Squealing sound coming from speaker on Handheld Unit
• Move the handheld unit and camera further away from each other
• Turn the volume down using Volume Control
• Power the handheld completely off, remove and re-insert the battery, then turn handheld back on.
ADDITIONAL CAMERAS AND REPLACEMENT PARTS
If you want to order an extra camera or need a replacement part, you can contact our
Consumer Relations Team at 1-800-268-6237 or via email
at: www.summerinfant.com/consumer-care/contact-us
• Rechargeable Ni-MH 3.7V 800mAh: #29030-10
• Camera AC Adapter: #28470-05
• Monitor AC Adapter: #28450-13
PROBLEM SOLVING: SETUP & USE (continued):
To use plugged-in:
Step 1: Place the monitors in the rooms from which you want to monitor your baby (ie.,
bedroom or living room). Plug the monitor AC adapters into the AC adapter jacks and other
ends into standard electrical outlets.
Step 2: Press and hold /MENU button for 5-seconds to power up until the Summer logo or
video appears on screen.
Step 3: For audio and no video, press the VIDEO ON/OFF button top of the unit.
Step 4: To turn the monitor off completely, press and hold the /MENU button for 5-seconds.
To use in portable/battery mode:
Step 1: Before using the monitor in portable mode (battery), charge the battery for 5-6 hours.
Step 2: To charge the battery, plug the monitor adapter into the monitor AC adapter jack (as
shown on page 3). Plug the other end into a standard electrical outlet.
Step 3: After initial 5-6 hour charge, to achieve optimal battery life, charge the battery
overnight and use in battery-mode during daytime monitoring, for up to 6-hours of continuous
use.
When battery is low the Power-On LED will illuminate red and the unit will emit a beeping
sound indicating that the battery needs to be charged.
Pairing Monitor and Camera:
The handheld unit and camera are paired at the factory for privacy reasons. If the handheld
and camera are not paired with each other for any reason, follow steps to pair:
Step 1: Move the handheld unit to the same area as the camera.
Step 2: With both the handheld unit and camera powered on, press the “ /MENU” button.
Step 3: Use the Lullibies/Right arrow to highlight CAMERA OPTIONS ( ). Using the up arrow
on the front of the monitor to highlight “ADD CAM” ( ) and press the “ ” button to enter
the ADD CAM menu. The next available camera will automatically be highlighted
(
2 3 4
). Press the “ ” button to begin pairing.
Step 4: Within 20-seconds, press the CODE button once on the back of the camera. The
green power LED will begin to flash.
Step 5: Once successfully paired, the green power LED will stop flashing and video will
appear on the monitor screen.
If this is unsuccessful, you should repeat steps above making sure the camera and
monitor are close enough to each other for pairing.
5

7
SPECIAL FEATURES:
• Nightlight Projection: A 3 colour night sky display can be projected on the ceiling in the
nursery from the camera, providing a soothing glow for baby’s room. The display alternates
from green to blue to red and can be turned on remotely from the parent handheld unit or
on the camera itself.
• Lullabies & Nature Sounds Soother: Three lullabies and two nature sounds can be
played in the baby’s room, using the remote control within the parent unit.
• Digital Zoom: The zoom option allows you to get a closer view on screen. Pressing the zoom
button once will move the image on the monitor screen to 2X normal view. Pressing the button
again returns the image to normal view.
• Two-way communication: Press and hold the TALK button on the right side of the monitor
to activate two-way communication with your baby via the camera unit.
• Night Vision: The camera has infrared LED lights that enable automatic black and white
night vision, allowing parents to continue to monitor low-light and dark rooms.
• Adjustable Volume & Brightness: Volume adjustments allow parents to select the level of
noise coming from the nursery that they want to hear. Some parents want to hear every
little sound, like baby cooing, and will select a higher volume setting while parents who
want to hear louder sounds and crying will use a lower volume setting. It is easy to adjust
based on preference and other sounds in the home. Video brightness can be adjusted as
well, to accommodate the level of light in the room. Brightness can be adjusted easily while
monitoring baby.
• Sound Lights: The 4 sound activated LED lights will illuminate on the video unit depending
on the level of baby’s sounds. This feature is particularly helpful if there is a lot of noise in
the room where the parent is located.
• Power-save Mode: While operating on battery power, the video will go to sleep after 3
minutes to conserve battery life. Audio and sound lights continue to function normally.
Video sleep mode is not available when using AC adapter.
• Video On/Off: This button turns the video picture on or off. It is ideal for a quick view of
baby in the middle of the night. To monitor audio only, press the button again to switch the
video picture off.
• Kick-stand: The monitor includes a built-in kick-stand for tabletop use .
6
Displaying Projection Lights
Step 1: To turn On/Off the camera Projection Lights, press the Projection On/Off button J ( )
on the front of the parent handheld unit. The lights will automatically rotate through a 3-colour
display of green, blue and red.
Step 2: The lights can also be switched On/Off by pressing the Projection On/Off button ( )
on the back of the camera.
Activating Lullaby and Soother Sounds
Step 1: To turn On/Off the Lullabies and Soother Sounds, press the Lullabies button ( ) on the
front of the parent handheld unit.
Step 2: To change or select the sound you want to play, use the up and down arrows ( ) on
the parent handheld unit. Choose between 3 lullabies and 2 nature sounds. These will play
continuously for 20 minutes and then automatically stop.
Step 3: The sounds can also be switched On/Off by pressing the Lullabies button ( ) on the
back of of the camera.
Note: Selecting sounds is only available from the parent handheld unit and cannot be
done from the camera.
Brightness Adjustment
Step 1: To adjust brightness, press the /MENU button to enter Menu Options.
Step 2: Use the up and down arrows to lighten or darken the video.