Sunjoy Dunkirk L-GZ326PST-2D User manual

Congratulations on your purchase of our SUNJOY Dunkirk Grill Gazebo. Our clear, easy to follow,
step-by-step instructions will guide you through the assembly process from start to finish.
WARNING:
This unit is heavy. Do not assemble this item alone. 6 to 8 people are recommended for safe assembly.
Keep all children and pets away from assembly area. Children and pets should be supervised when they
are in the area of the Gazebo construction.
Keep assembly area at least 6ft/1.8m from any obstruction such as a fence, garage, house, overhanging
branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions
should always be followed to reduce the risk of personal injury and damage to the product. Please read all
instructions before assembly and use.
Assemble on level ground.
Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.
For outdoor use only
Dunkirk Grill Gazebo
Item#: L-GZ326PST-2D
IMPORTANT
Please take time to read these instructions thoroughly and follow each step carefully for safe and easy
operation. Keep this manual for future reference.
For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569
from 8:30AM to 5:30PM EST, or email us at [email protected], or visit www.sunjoydirect.com for
assistance.

Top Screen A 2
Tilt Beam 1 B1 2
Tilt Beam 2 B2 2
Baffler B3 4
Upper Connection Pole C1 2
Lower Connection Pole C2 2
Top Connection Pole D1 1
Top Hook D2 2
Cover Supporting Bar E 4
Big Cover 1 F1 2
Big Cover 2 F2 2
Big Cover 3 F3 2
Small Cover 1 G1 2
Small Cover 2 G2 2
Small Cover 3 G3 2
Cover Panel H 1
Post 1 I1 2
Post 2 I2 2
Screen J 2
Parts List

Table Top K 2
Shelf L 2
Hanger Bar M 1
Hook Rack N 1
Cover Panel Presser O 32
Corner Slice P 8
AA Bolt M6X15 28 PCS
BB Flat Washer M6 32 PCS
CC Bolt M6X30 4 PCS
Z Wrench M6 1 PC
Hardware Pack 1

Fig 1: Insert Tilt Beam 1 (B1) to Top Screen (A), and tighten them with Baffler (B3) by Bolt (AA) and Flat Washer (BB).
Use the same way for Tilt Beam (B2). Then tighten Upper Connection Pole (C1) to it by Bolt (AA) and Flat Washer
(BB) (Side with mark “UP” up)
Fig 2: Tighten one end of Lower Connection Pole (C2) to Tilt Beam 1 (B1), the other end of Lower Connection Pole
(C2) to Tilt Beam 2 (B2), with Bolt (AA) and Washer (BB).
Fig.3: Attach Top Hook (D2) to Top Connection Pole(D1)
Fig.4: Connect Top Connection Pole (D1) to Top Screen (A) by Bolt (AA) and Flat Washer (BB).
Fig.5: Tighten Cover Supporting Bar (E) to the Tilt Beam (B1&B2) by Bolt (CC) and Flat Washer (BB)
UP
UP

BB Flat Washer M6 36 PCS
CC Bolt M6X30 4 PCS
DD Bolt M6X15 30 PCS
EE Bolt M6X40 2 PCS
Hardware Pack 2
Fig 6:
Insert lower end of Big Cover 2 (F2)
into Cover Supporting Bar (E), then
tighten Upper end of Big Cover 2 (F2)
to Upper Connection Pole (C1), and
tighten them by Bolts (DD) and Flat
Washer (BB).
Insert the lower end of Big Cover
(F1&F3) into the Cover Supporting
Bar (E); tighten the upper end and
side by Bolt (DD) and Flat Washer
(BB).

Fig 8:
Insert the lower end of Small Cover 2
(G2) into Cover Supporting Bar (E).
Insert the lower end of Small Cover
1&3 (G1&G3) into Cover Supporting
Bar (E), tighten the sides by Bolt (DD)
and Flat Washer (BB).
Fig 9:
Tighten Cover Panel (H) to Top
Connection Pole (D1) by Bolt (EE)
and Flat Washer (BB)..
Fig 7:
Tighten Cover Supporting Bar (E) on
Top Screen (A) by Bolt (CC) and Flat
Washer (BB).
Fig 10:
Insert Cover Panel presser (O) into
Cover Supporting Bar (E) to make
Cover Panel even.

AA Bolt M6X15 16 PCS
BB Flat Washer M6 40 PCS
DD Bolt M6X15 16PCS
JJ Bolt M6X45 8 PCS
II Ground Stake Φ8x180 8 PCS
Hardware Pack 3

Fig 15: Fix Hook Rack (N) on Post 1&2 (I1&I2) by Bolt (AA) and Washer (BB).
Fig 16: Put (L) on the Post.
Fig 17: Fix the gazebo on the ground by Ground Stake (II).
Fig 11: Assemble Post 1&2 (I1&I2) to Screen (J) by Bolt (JJ) and Washer (BB).
Fig 12-1: Put up the assembled part, insert Tilt Beam (B1) and (B2) into the hole of Post (I1&I2).
Fig 12: Connect Post (I1&I2) with Tilt Beam (B1), (B2) by using Screw (AA) and Flat Washer (BB).
Fig 13: Put Table Top (K) on the assembled Screen, and fix it on Post 1&2 (I1&I2) by Corner Slice (P), Bolt
(DD) and Washer (BB).
Fig 13-1: Then fix Table Top (K) on the Screen (J) by Corner Slice (P), Bolt (DD) and Washer (BB).
Fig 14: Fix Hanger Bar (M) on Post(I1&I2) by Bolt(AA) and Washer(BB).

Care & Maintenance
Steel components of garden accessories and furniture are treated with rust inhibiting paint. However, due to
the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
To minimize this condition, it is recommended that care be taken when assembling and handling the product,
in order to prevent the paint from being scratched.
Limited Warranty:
Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship and
materials for a period of 1 year from the date of purchase, provided the item was factory-sealed at the time of
purchase and is maintained with care and used only for personal, residential purposes. Should any
manufacturing defect arise within this warranty period, Sunjoy Industries will repair or replace (at our option)
any defective merchandise upon proof of purchase; however, transportation and delivery costs, as well as
payments to a third party for assembly or disassembly of the item, remain the responsibility of the purchaser.
A purchaser of an "open box," previously-returned, or "clearance" item, as well as original purchasers outside
of the warranty period, may obtain replacement parts from Sunjoy Industries for products in current production,
at nominal cost.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of
nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not
covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original
purchaser and is non-transferable. Any replacement of warranted items will be in the original style and color,
or a similar style and color if the original is unavailable or has been discontinued. As some states do not allow
exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This
warranty gives you specific rights, and you may also have other rights, which vary from state to state.