Sunlux XL-3042M User manual

1
XL-3042M
2D Fixed Mount Barcode Scanner
User Guide
V 1.1

2
Copyright
© SUNLUX IOT TECHNOLOGY (GUANGDONG) INC. All rights reserved.
Please read through the manual carefully before using the product and operate
it according to the manual. It is advised that you should keep this manual for
future reference.
The products depicted in this manual may include software copyrighted by
SUNLUX IOT TECHNOLOGY (GUANGDONG) INC or third party.
The user, corporation or individual, shall not duplicate, in whole or in part,
distribute, modify, decompile, disassemble, decode, reverse engineer, rent,
transfer or sub-license such software without prior written consent from the
copyright holders.
This manual is copyrighted. No part of this publication may be reproduced,
distributed or used in any form without written permission from SUNLUX.
SUNLUX IOT TECHNOLOGY (GUANGDONG) INC reserves the right to make
final interpretation of the statement above.
SUNLUX IOT TECHNOLOGY (GUANGDONG) INC.
301 Building B, Yushu Industrial Park, Science City, Guangzhou-510663,
China
Tel: [phone]
Website: www.xl-scan.com

3
Revision History
Version
Description
Date
V 1.1
Initial release
2018.6.1

4
Contents
目录
1. Introduction............................................................................................................ 5
2. Working Parameters............................................................................................ 5
Interface Support.................................................................................................. 5
Operating Environment........................................................................................6
Storage Environment........................................................................................... 6
Depth of Field........................................................................................................6
3. Performance Characteristics.............................................................................7
4. Electrical Characteristics................................................................................... 7
Dimensions............................................................................................................7
Interface Definition............................................................................................... 8
TTL-232 PIN..........................................................................................................8
USB PIN.................................................................................................................8
Connection Socket............................................................................................... 9
5. Installation.............................................................................................................. 9
Optical Requirements.......................................................................................... 9
Window Placement.............................................................................................. 9
Material and Color of Window.......................................................................... 10
Window Size....................................................................................................... 10
Ambient Light...................................................................................................... 11
Using Safety........................................................................................................11
Installation........................................................................................................... 11
Front View (unit: mm)........................................................................................ 12
Bottom View (unit: mm).....................................................................................12
Stereogram..........................................................................................................13

5
1. Introduction
Xl-3040M is a CMOS 2D barcode reading module with high performance
characteristics of fast reading speed, high resolution, small size and long depth
of field, which can be easily embedded into various devices as barcode
reading components.
This module has the core technology developed by SUNLUX, the
products are completely designed and manufactured by SUNLUX. Including a
series of comprehensive technologies such as: shape structure, optical
imaging system, photoelectric conversion system, waveform digital processing,
graphics processing algorithm, decoding algorithm, embedded system, etc.
Therefore, this product can be modified and customized according to the
special needs of different customers. Xl-3040M can read a variety of 1D
barcodes. It has the following features:
◆Support serial port mode, support command control function.
◆Support USB virtual serial port function, compatible with a variety of
software.
◆Standard wiring function, compatible with most products in the market.
◆Support upgrade function for later maintenance and function
expansion.
◆Multi-language support, support a variety of national keyboard
languages.
2. Working Parameters
Interface Support
◆UART-TTL: TTL level serial communication interface.
Used in all kinds of embedded operating environments, to provide high
performance barcode reading, especially for all kinds of POS, cash register,
PDA, embedded applications.
◆USB-HID: keyboard simulation device based on usb-hid protocol can be
directly connected with USB ports of PC, no need to install the driver.
Connect various USB devices, HID output data. Suitable for various
systems such as WinCE, WINDOWS, LINUX, etc.
◆USB-VCP: serial communication simulation device based on USB can be
directly connected with USB ports of PC, need to install the driver.
Support virtual serial connection, high speed and stable transmission.

6
Operating Environment
Operating voltage
5V
Operating current *
70mA
Maximum current
100mA
Operating temperature
-20°C to 60°C
Working humidity
5% to 90%
Ambient illumination
0-100,000lx
Storage Environment
Storage temperature
-40°C to 85°C
Storage humidity
5% to 90%
Depth of Field
* for barcodes exceeding 13mil. Blind spots mainly depend on perspective coverage.

7
3. Performance Characteristics
Read mode
CMOS
Light source
LED (6000K) 900lux @100mm
Mark light
No
Light source intensity
265 LUX (130 mm)
Scan angle
Omnidirectional decoding
Scan speed
30 times/second
Resolution
640*480 pixel
Reading accuracy
4mil
Print contrast
≥20%
Support codes
1D SUPPORT: Industrial 25,
standard, matrix 25, code 11,
codabar, MSI/Plessey,
code39(standard 39 & full ASCII
code39), code 32, code 93,
code128, UPCA, UPCE, EAN13,
EAN8, UPC/EAN, add-on 2/5,
ISBN, ISSN, GS1(RSS) Rss-14,
LIMITED, EXPENDED, include
GS1 STACK
2D SUPPORT: PDF417, DATA
Matrix,QR code.ect.
4. Electrical Characteristics
Dimensions
Overall size
65.1*61.6*33mm
Location hole
Φ 3.4mm * 4mm
Weight
45g±1g (15g glass cover
included)

8
Interface Definition
This module supports USB connection and serial port connection (TTL-232).
The interface sequence is defined as follow:
1. Adopt Standard micro USB interface.
2. Adopt SH1.05PIN TTL-232 serial port.
* the other end is connected to the serial interface of the device. If the ninth
pin of the serial interface does not provide power, a 5V (positive inside and
negative outside) power supply should be added to the cable.
TTL-232 PIN
Pin
Name
Type
Instruction
1
GND
Grand
Grand
2
RXD
IO
TTL level
3
TXD
IO
TTL level
4
VCC
Power
DC 5V
5
GND
Grand
Grand

9
5. Installation
Optical Requirements
Window Placement
When install this module, a transparent medium window can be installed in
front of the module in order to separate the inside and outside of the product.
The size of the window can make the illuminating beam completely emitted
and prevent light reflection from entering the module. If illuminating light
reflects into the module, it will affect the reading performance. In order to
ensure good reading performance, the distance between the far end of the
window to the front end of the module is not more than 3mm, and the distance
between the near end of the window to the front end of the module is not more
than 2mm. If the window is designed by tilt, vertical installation is required.

10
Material and Color of Window
When selecting material and color of the window, there are the main
points of the main consideration: high transmittance of light (red light), high
definition and the uniform refractive index. Optical glass or PMMA is usually
used. At the same time, should consider the design of anti fouling and
scratch prevention, because scratching and fouling will affect the
performance of reading. Wear resistant materials or coatings can be
selected on the window material.
Window Size
The size of the window is based on the premise that it does not block the
field of view and the lighting area as much as possible. The optical region of
this module is shown in the figure below.
Optical vertical region diagram, horizontal scanning angle: 44°.

11
Optical vertical region diagram, vertical scanning angle: 34°.
Ambient Light
This module has its own light, which can be used normally in the absence of
ambient light, and it can be well adapted to 50Hz~60Hz common ac
fluorescence lighting.
Using Safety
The light used in this module is LED light, and the wavelength range of light
generated is safe. Try to avoid looking directly at the light and cause discomfort
when using.
Installation
Please refer to the following dimensions when integrating this module into
applications.

12
Front View (unit: mm)
Bottom View (unit: mm)

13
Stereogram