Sunnydaze Decor DTA-270 User manual

R-605
COFFEE TABLE WITH SHELF
DTA-270
Carefully review assembly and care instructions before using this product. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2022
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.

Page 1 / 6

INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
    
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.

dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
R-605 08/2022
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

Page 2 / 6

  
AWood Dowel 4
AZ Hex Key 1
BX M3x12mm Flat Screw 4
DM3.5x14mm Flat Screw 24
DZ  20
FM Screw Cap 20
QAngle Bracket 6
XPlastic Foot 4
COMPONENTS
(not included)
Phillips Screwdriver
Rubber Mallet
R-605 08/2022
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item contains small parts that can be
swallowed. Keep children and pets away during assembly.
WARNING
  
01 Tabletop 1
02 Left Leg 2
03 Right Leg 2
04 Bottom Rail 2
05 Shelf 1
06 Short Apron 2
07 Long Apron 2
Page 3 / 6
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or


IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability.
R-605 08/2022
ASSEMBLY
Carefully review all steps and fully understand assembly before beginning.
STEP 1
02: 2
03: 2
A: 4
BX: 4
X: 4
TIP: Install wood dowels by gently
tapping them into the designated
hole using a rubber mallet.
IMPORTANT:
Ensure Part 4 is installed
in the correct direction, as
indicated in the drawing.
Page 4 / 6
STEP 2
04: 2
07: 2
D: 12
Q: 6
STEP 3
DZ: 8
STEP 4
05: 1
DZ: 4
 
 
 

R-605 08/2022 Page 5 / 6
STEP 5
06: 2
DZ: 8
STEP 6
01: 1
D: 12
STEP 7
FM: 20
 
 Fully tighten all