Sunnydaze Decor LAM-585 User manual

Page 1 / 202/2020LY111
OUTDOOR COFFEE TABLE
LAM-585
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

Purchase Date: / / Order/Customer Reference Number:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
customerser[email protected], or via our contact us page at https://tiny.cc/SunnydazeContact
  
ATable Top 1
BEnd panel 2
CSupport Beam 1
DJCBC 60mm 6
EBarrel Nut 6
FHex Key 1
GBarrel Nut Driver 1
HELPFUL HINT
This item was treated with teak oil at the factory. Apply a suitable wood oil at least once a year, or
when the wood looks particularly dry. Left untreated, the wood will weather to a silvery gray color.
Ensure all parts are
accounted for before
disposing of packaging.
CHOKING HAZARD — This item
contains small parts that can be
swallowed. Keep children away
during assembly.
WARNING

A
C
E
D
B
F
G
D
Page 2 / 202/2020LY445
USE & CARE
SAFE USE: Place the table on a at, level surface. Never sit or climb on the table.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
CLEANING: Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft cloth.
MAINTENANCE:This furniture was treated with teak oil at the factory. Apply a suitable wood oil at least once
a year, or when the wood looks particularly dry. Follow application instructions as noted with the suitable wood
oil (not included).
STORAGE: Protect this item from ice and snow. Store indoors, in a dry location. Covering the unit while in
storage will help prevent dust buildup.
ASSEMBLY
1. Lay Table Top (A) face-down on a clean, soft surface.
2. With the slotted ends facing upwards, place 4x Barrel Nut (E) into the underside of the table top. Use Barrel
Nut Driver (G) to turn the barrel nut so the threaded hole aligns with the pre-drilled hole.
3. Align Leg Panel (B) with Table Top (A) and loosely secure them by hand-tightening 2x JCBC 60mm bolts
(D). Repeat this step on the opposite side of the table.
4. Insert 2x Barrel Nut (E) into Support Beam (C) and secure between End Panels (B) using 2x JCBC 60mm
bolts (D).
5. Gently tighten all bolts using Hex Key (F).
NOTE: Do not fully tighten any bolt until all bolts have been placed.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

