Sunnydaze Decor CRO-102 User manual

127030210
SIDE TABLE WITH SHELF
CRO-102
Carefully review assembly and care instructions before using this product. Save this document for future reference.

Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2022
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.

Page 1 / 7

INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
    
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture;
only use a slightly moistened cloth.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.

dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
127030210 08/2022 Page 2 / 7
WEIGHT CAPACITY
Please pay attention to the maximum weight supported
by each compartment.
Always ensure weight is evenly distributed.
To ensure the quality of the product, take care not to
exceed the weight capacities.
NOTICE:
Manufacturer and seller expressly disclaim any and all liability
from personal injury, property damage or loss, whether direct or
indirect, or incidental, resulting from the incorrect attachment,
improper use, inadequate maintenance, or neglect of this


  
AProtective Foot 4
BM4x20mm Mating Screw 1
CM4x27mm Chicago Bolt 1
DM4x14mm Wood Screw 4
ECam Lock 8
FCam Screw 8
GWood Dowel 12
ISticker 8
COMPONENTS
(not included)
Phillips Screwdriver
Rubber Mallet
127030210 08/2022
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and pets
away during assembly.
WARNING
Page 3 / 7
  
1Top/Base Panel 2
2Side Panel 2
3Back Panel 1
4Bottom Leg 1
5Top Leg 1
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,


127030210 08/2022 Page 4 / 7
Install wood dowels by gently
tapping them into the designated
hole using a rubber mallet.
Use a screwdriver to tighten the
cam screw until the shoulder is

tighten or under-tighten.
Align the cam lock opening (arrow)
with the pre-drilled hole on the side
of the panel. Use a screwdriver to
adjust alignment as needed.
STEP 1
ASSEMBLY
Wood Dowel Cam Screw Cam Lock



2x2 3x1
IMPORTANT INSTALLATION INFORMATION
For the stability of the unit, it is important that furniture connectors are installed correctly.
See drawings and tips below for proper installation.



1x2
STEP 2
x12
G
x8
F

127030210 08/2022 Page 5 / 7




3x1
STEP 4
STEP 3


1x1
STEP 5
1x1 2x2

x4
E
x4
I
x4
E
x4
I

127030210 08/2022 Page 6 / 7




4x1 5x1
STEP 7
STEP 6


STEP 8
4x1 5x1
IMPORTANT:
Assemble on a soft surface
to prevent damaging the unit
and/or the assembly surface.

x4
A
x1
BM4x20mm
x1
CM4x27mm


M4x14mm x4
D
Alignment
IMPORTANT: Ensure the legs are aligned with the bottom panel as indicated in the diagram above.

127030210 08/2022 Page 7 / 7
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,


SAFETY STATEMENTS & WARNINGS
• For residential use only. Not for commercial or industrial use.
• For indoor use only.
• Ensure all fittings are tight before use. Periodically check fittings to ensure they are tight.
• Only use this unit on a flat, level surface.
• Do not sit, stand or climb on the unit.
• Supervise children; never allow children to climb or sit on this unit as it may tip over and cause serious injury.
• Do not place liquids or hot items directly on the furniture.
• Never use chemical cleaning products or polishes as doing so may damage the finish.
• Do not exceed the weight capacity of the furniture.
• Do not overload the shelf as doing so may cause it to sag.
• Do not place the unit in direct sunlight.
• Avoid placing the unit near heating or cooling vents as forced air is very drying and can damage the unit.
• Do not write on furniture without a padded barrier to protect the surface.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team directly through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.