Sunnydaze Decor CRO-140 User manual

134130210
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
08/2022
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Page 1 / 14
BUFFET TABLE
CRO-140
Carefully review assembly and care instructions before using this product. Save this document for future reference.

2-PERSON
ASSEMBLY

INTRODUCTION
Instrucciones
Instructions


Read the manual carefully to ensure you fully understand
all use, care, assembly, and safety information.
Read this manual carefully and
follow the assembly instructions
in the order listed. Pay close
attention to assembly drawings.
Regularly clean with a clean
    
accumulation.
Do not paint the unit.
Do not use abrasive materials or
cleaners to clean the furniture;
only use a slightly moistened cloth.
Indoor use only.
Do not expose the furniture to
heat or humidity.
When cleaning nearby the
furniture, do not allow contact
with water or cleaners as it may
deteriorate the furniture.
Do not allow metal components
to come in contact with water or
cleaners as it may cause rust and
staining.

dry surface.
Use a soft, protective barrier when
assembling the furniture.
TIP: Use the box carton as a
protective layer to separate and
protect the parts from scratches and
other damage during assembly.
Do not push or drag furniture as
doing so may damage the unit.
Only move furniture when it is empty.
Always ask for help when moving
furniture.
Avoid Accidents - Do not climb, sit
or stand on the furniture.
Do not allow children to play on or
inside the furniture.
Keep sharp objects away as they
may scratch or damage the unit.
Do not use the furniture as a writing
surface without a padded barrier.
134130210 08/2022
WEIGHT CAPACITY
Please pay attention to the maximum weight supported by
each shelf.
Always ensure weight is evenly distributed.
To ensure the quality of the product, take care not to
exceed the weight capacities.
For maximum stability, anchor this unit to a wall using the
included hardware.
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property
damage or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment,
improper use, inadequate maintenance, or neglect of this product.
Page 2 / 14

  
ACam Screw 14
BCam Lock 14
CWood Dowel 16
DM4x50mm Flat Screw 4
EM4x25mm Flat Screw 2
FSticker 20
GWasher 4
HWall Strap 2
IWall Anchor 4
JM7x30mm Bolt 6
KRound Plug 4
LM3.5x14mm Flat Screw 16
MScrew Grommet 6
NSquare Plug 4
OM7x50mm Bolt 6
PHex Key 1
QHinge 3
RHinge Plate 3
SGas Spring Set 1
TM3.5x40mm Flat Screw 6
COMPONENTS
134130210 08/2022
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children and pets
away during assembly.
WARNING
  
1Bottom 1
2Right Side Panel 1
3Left Side Panel 1
4Divider 1
5Back 1
6Door 1
7Top Tube 1
8Bottom Tube 2
9Side Frame 2
10 Top 1
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
(not included)
Phillips Screwdriver
Rubber Mallet
Power Drill
with 6mm Drill Bit
Page 3 / 14
2-PERSON
ASSEMBLY

134130210 08/2022
Install wood dowels by gently tapping them
into the designated hole using a rubber mallet.
Use a screwdriver to tighten the cam screw

not over-tighten or under-tighten.
Align the cam lock opening (arrow) with the
pre-drilled hole on the side of the panel. Use
a screwdriver to adjust alignment as needed.
ASSEMBLY
Wood Dowel Cam Screw Cam Lock
IMPORTANT INSTALLATION INFORMATION
For the stability of the unit, it is important that furniture connectors are installed correctly.
See drawings and tips below for proper installation.
STEP 1



1x1 2x1 3x1
Page 4 / 14
10 x1
x14
A
x8
C
STEP 2



4x1 5x1
x8
C
TIP: Install wood dowels by gently tapping them into
the designated holes using a rubber mallet.
TIP: Install wood dowels
by gently tapping them
into the designated holes
using a rubber mallet.

134130210 08/2022



STEP 3


STEP 4

1x1 4x1
Page 5 / 14
IMPORTANT:
Note the position of the pilot holes on Part 4; ensure components
are installed as indicated in the drawing.
10 x1
x4
B
IMPORTANT:
Notice the distance of the pilot holes from
the edges of Part 5; ensure components are
installed as indicated in the drawing.
2x1 5x1
x1
B

134130210 08/2022

STEP 5

STEP 6
Page 6 / 14




x4
B
x5
B
3x1

134130210 08/2022



STEP 7


7x1
STEP 8

Page 7 / 14
M3.5x40mm x6
T
x4
N
x6
M
x4
K
8x2 9x2


134130210 08/2022



STEP 9
Page 8 / 14


9x1
STEP 10

7x1 8x2 9x1
M7x50mm x3
O
M7x50mm x3
O



STEP 11


STEP 12

134130210 08/2022 Page 9 / 14
x6
JM7x30mm
x2
H
x2
EM4x25mm

x2
G


STEP 13
134130210 08/2022 Page 10 / 14
WALL-MOUNTING OPTIONS

OPTION 1
x2
G
x2
DM4x50mm
IMPORTANT: 

Carefully measure the location of the pilot hole before drilling and installing the unit.
WARNING: Check for pipes and electrical wiring before drilling.
• Place the unit against the wall and mark the position for drilling the pilot hole.
• Using a power drill with a 6mm bit, drill a pilot hole to the depth of the wall anchor. For walls with softer material, a 5mm bit is
recommended.
• Insert the wall anchor into the hole until the opening is flush with the wall. Ensure the wall anchors are well fitted and are tight
in the pilot hole.
• Align the shelf with the wall anchors and secure using the 50mm screw.

OPTION 2
x2
DM4x50mm
OPTION 1
OPTION 2
x2
I
x2
I