Sunnydaze Decor HH-HCHAS User manual

HH-HCHAS Page 1 / 2
2-POINT HANGING HAMMOCK CHAIR
WITH A-STAND
Read all assembly and care instructions carefully before using this product. Save these instructions for future reference.
Select a smooth, level surface to place the hammock chair stand.

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
This hanging hammock chair with stand is not
designed for use as a swing. Bouncing, swinging,
and any other signicant movement may result in
serious injury.
This product must be used on a level, stable
surface. Make sure all snap buttons are properly
engaged before each use.
Weight Limit: 330 lbs.Weight Limit: 330 lbs.
CAUTION
1/2021
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
  
ATop Support 2
BX-Support 1
CLeg 4
DS-Hook 2
EFoot 4
F2-Point
Hammock Chair 1
2-PERSON
ASSEMBLY
RECOMMENDED
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or
indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.

Page 2 / 2
1. Carefully snap or slide Foot (E) onto the curved edge of Leg (C)
as shown.
2. Align the spring button on the straight side of Leg (C) with the
hole in Top Frame (A). Press the button and slide the leg onto
the support until the button snaps through the hole. Repeat on
the opposite side of the top support.
3. Repeat Step 2 for the other side of the stand.
4. Align the holes on the curved sides of Legs (C) with the spring
buttons on X-Support (B). Press the button and slide the leg
onto the support until the button snaps through the hole. Repeat
until all legs are secured.
5. Place 1 S-Hook (D) into the top of each Top Support (A).
6. Ensuring the ropes are not twisted, hand Hammock Chair (F)
on the S-hooks.
HH-HCHAS 1/2021
ASSEMBLY
TROUBLESHOOTING
• If the stand seems unstable, make sure it is on a level surface, and the feet are correctly distributed.
• If a spring button does not engage during assembly, it may be misaligned or stuck. Check to make sure the button is
properly aligned with the corresponding hole. If the button is stuck, use a thin, small tool to help release the button
from the tube in which it is installed.
USE & CARE
• SAFE USE: Swinging, bouncing, jumping and other excessive movement while using this product could result in
serious injury.
• CHILDREN: Supervise children at all times. Do not allow children to play or sleep in hammock chairs.
• STORAGE: Store indoors when not in use. A cool, dry location is recommended to prevent damage from exposure to
moisture and sunlight.
• INSPECT: Ensure the stand is assembled correctly and all spring buttons are intact before each use. Do not use the
hammock chair if the ropes, fabric, or stand show signs of weakness.
• SCRATCHES: The powder-coating is tough and durable, but even under normal use, some scratching is inevitable.
Scratches can be repaired with rust-resistant paint. NOTE: painting the stand will void the product warranty.

CLEANING
SPOT CLEAN/HAND-WASH ONLY DO NOT USE BLEACH OR FABRIC SOFTENERS LAY FLAT TO DRY
HAMMOCK: Spot clean with a damp cloth.
For more stubborn stains, hand-wash in a bathtub or kiddie pool using mild soap and a soft-bristled scrub brush. Soaking
may be required for heavily soiled fabric or ropes. Keep the wooden spreader bars, metal components out of the water
as much as possible.
Thoroughly rinse all soap residue. Air-dry on a at surface to prevent the ropes from stretching. The ropes may shrink
slightly while drying but will stretch back out with use.
STAND: Use a soft, damp cloth to wipe down the stand.