Sunnydaze Decor DORIAN BWD-818 User manual

Page 1 / 2BW19-03T
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
12/2022
DORIAN 5-FOOT RECTANGULAR
DINING TABLE
BWD-818
Carefully read all assembly and information in this manual before using this product. Save this manual for future reference.

  
ATable Top 1
BLeg 4
1JCBC M8x60mm Bolt 8
2Split Washer 8
3Flat Washer 8
4Tack Glide 4
5Hex Key 1 CHOKING HAZARD — This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
WARNING
HELPFUL HINT
Sunnydaze Decor advises reading this manual fully, and assembling the item soon after purchase. Check that
all parts are accounted for and familiarize yourself with the assembly before beginning.
NOTE: Over time and with use, the bolts may become loose. Save the included tool for tightening loosened hardware.

(not included)
Rubber Mallet
100
pounds
45.35 kg
Weight Capacity
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.

SAFETY STATEMENTS & WARNINGS

Page 2 / 2
WARNING:


• For indoor use only.
• This product is for residential use only; institutional or commercial use will automatically void the product warranty.
• Ensure fittings are tight before use. Periodically check fitting to ensure they are tight.
• Do not exceed the weight capacity of this item.
• Do not place liquids or hot items directly on the unit.
• Never use chemical cleaning products or polishes as they may damage the finish.
• Avoid long-term exposure to sunlight.
• Avoid placing near heating or cooling vents as forced air is be very drying and could damage the wood.
• Use a padded barrier to protect the table surface when using writing utensils.
Care & Maintenance
Clean the furniture using a dry, soft cloth or clean
feather duster.
Do not clean with harsh cleansers or polish.
SOAP
Remove stains with a slightly damp cloth and mild
soap. Dry with a soft cloth to prevent water damage.
Do not put hot items or any liquids directly on the
furniture surface.
Place Table Top (A) upside-down on a soft, clean surface.
Align Leg (B) with the corner of the table top. Use two sets of Flat Washer (3), Split Washer (2), and JCBC
M8x60mm Bolt (1) to secure the leg as shown. Repeat until all legs have been securely fastened.
Use a rubber mallet to install one Tack Glide (4) into the bottom, center of each leg.
Tip: Always fully insert the hex key inside the designated notch of the bolt.
If the hex key is not entirely inside the notch, the hex key could slip out,
causing damage to the bolt head. In addition, repeated hex key slipping
will cause the notch to become rounded, making it di󰀩cult or impossible
to tighten the bolt.
BW19-03T 12/2022
ASSEMBLY

Page 1 / 3BW19-01C
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
12/2022
LADDER-BACK DINING SIDE CHAIRS
BWD-825
Carefully read all assembly and information in this manual before using this product. Save this manual for future reference.

  
AChair Back 2
BApron (L/R) 4
CStretcher (L/R) 4
DFront Leg Panel 2
ESeat 2
1JCBC M6x50mm Bolt 16
2Split Washer 16
3M4x32mm Screw 16
48x30mm Wood Dowel 4
5Tack Glide 8
6Hex Key 1
CHOKING HAZARD — This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
WARNING
HELPFUL HINT
Sunnydaze Decor advises reading this manual fully, and
assembling the item soon after purchase. Check that all
parts are accounted for and familiarize yourself with the
assembly before beginning.
NOTE: Over time and with use, the bolts may loosen.
Save the included tool for tightening loosened hardware.
(not included)
Phillips Screwdriver
Rubber Mallet
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
275
pounds
124.7 kg
Weight Capacity
(per chair)

Page 2 / 3
3. Place one Wood Dowel (4) into the center mounting hole of both aprons. Align Front Leg Panel (D) with the
aprons and stretchers. Secure each apron using two sets of JCBC M6x50mm Bolts (1) and Split Washers
(2). Then secure the stretchers to the front leg panel using M4x32mm Screws (3).
4. Fully tighten all hardware. Then, align Seat (E) with the assembled chair and secure using four M4x32mm
Screws (3) as shown. Install one Tack Glide (5) on the bottom of each leg using a rubber mallet.
Tip: Always fully insert the hex key inside the designated notch of the bolt.
If the hex key is not entirely inside the notch, the hex key could slip out, causing
damage to the bolt head. In addition, repeated hex key slipping will cause the
notch to become rounded, making it di󰀩cult or impossible to tighten the bolt.
BW19-01C 12/2022
INDIVIDUAL CHAIR ASSEMBLY
Review all steps and understand
assembly before beginning.
Do not fully tighten hardware until all frame
components have been loosely assembled.
1. Align right-side Apron (B) with the
top mounting holes of Chair Back
(A) and loosely secure using two
sets of JCBC M6x50mm Bolts (1)
and Split Washers (2) as shown.
Repeat to connect the left-side
apron to the chair back.
2. Ensuring the mounting holes
face the bottom of the chair, align
Stretcher (C) with the bottom
mounting holes on Chair Back
(A) and secure using M4x32mm
Screw (3) as shown. Repeat on
the opposite side of the chair
back.
IMPORTANT: Do not install wood dowels
into mounting holes with threaded inserts.
NOTE: The angled edge of the stretcher
faces the chair back.
NOTE: The angled edge of the apron
faces the chair back.

SAFE USE: Follow all safety statements and warnings. For residential use only. Only use on a at, level surface. Do not
stand on the chair. Do not exceed the weight capacity of the chair.
INSPECT: Before use, ensure the unit is assembled correctly and all hardware is securely tightened. If parts are missing,
broken, damaged, or worn out, do not use this product.
SUN EXPOSURE: All fabrics will eventually fade from sun exposure. Maintain cushion color and integrity by keeping the
unit out of direct sunlight.
CLEAN: Use a soft cloth and clean, warm water to spot-clean the cushion. Use a slightly damp cloth to hand-wash the
chair. Do not use chemicals or abrasive materials to clean any part of the unit.
Care & Maintenance
SAFETY STATEMENTS & WARNINGS

Page 3 / 3
• For indoor use only.
• This product is for residential use only; institutional or commercial use will automatically void the product warranty.
• This product is intended to be used by one person at a time.
• Ensure fittings are tight before use. Periodically check fitting to ensure they are tight.
• Do not stand or climb on any part of this unit.
• Do not exceed the weight capacity of the furniture.
• Do not place liquids or hot items directly on the furniture.
• Never use chemical cleaning products or polishes as they may damage the finish.
• Avoid long-term exposure to sunlight.
• Avoid placing near heating or cooling vents as forced air is be very drying and could damage the wood.
BW19-01C 12/2022
NOTICE:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage


If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
Cleaning
Do not use bleach, harsh chemicals, or abrasive materials to clean the furniture.
SEAT CUSHION
• Frequently brush or vacuum the cushion to prevent dust and dirt from getting deep into the fabric.
• Spot clean the cushion using a soft cloth and lukewarm water. For more stubborn stains, gently scrub using mild soap
and lukewarm water. Press a dry towel on the spot-cleaned area to absorb excess moisture. Allow to thoroughly dry
before use.
WOODEN SURFACES
• Use a dry, soft cloth or a clean feather duster to remove dust. For more stubborn stains, gently scrub wooden surfaces
using a slightly damp cloth.