Sunnydaze Decor TF-554 User manual

  
1Top Pole 2
2Bottom Pole 2
3Support Bar 1
4Left Base Pole 1
5Right Base Pole 1
CExtension Spring 2
DPin 2
ELong Bolt Set 2
FShort Bolt Set 10
GFoot 8
SWasher 20
UBolt 2
A1 Wrench 1
A2 3mm Hex Key 1
A3 4mm Hex Key 1
Page 1 / 5TF-9766D-S
WARNING!
CHOKING HAZARD — This item contains small parts that
can be swallowed. Keep children away during assembly.
DELUXE STEEL U-SHAPE
HANGING CHAIR STAND
TF-554
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
This chair stand is not designed
for use as a swing. Bouncing,
swinging, or any other signicant
movements while in use may
cause serious injury.
This stand must be on a level,
stable surface. Make sure all
hardware is securely tightened
before each use.
Weight Limit: 550 lbs.Weight Limit: 550 lbs.
CAUTION
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
06/2020

Page 2 / 5TF-9766D-S
ASSEMBLY
Align Left Base Pole (4) and Right Base
Pole (5), as shown.
Fasten the base poles using 2x Short
Bolt Set (F) and 4x Washer (S).
STEP 1
54
FSF
2FS
G
ASSEMBLY TIP
Ensure parts align correctly before fully
tightening hardware.
Carefully snap Foot (G) onto the base,
ensuring they are evenly spaced.
Place 1x Bottom Pole (2) onto the
assembled base, ensuring the holes of
the pole align with the base.
Use 4x Short Bolt Set (F) and 8x Washer
(S) to secure the pole to the base. Secure
the second bottom pole the same way.
STEP 2
06/2020

Page 3 / 5
EE
1
STEP 3
Slide 2x Top Pole (1) onto the bottom poles, ensuring the holes of the top pole align with the bottom pole.
Use 1x Long Bolt Set (E) to fasten each top pole to the bottom pole.
TF-9766D-S 06/2020

D
C
A3
STEP 4
Secure Support Bar (3) between the top poles using 2x Bolt (U).
Place Pin (D) into the top support pole. Insert Extension Spring (C) through the bottom of Pin (D).
Page 4 / 5TF-9766D-S 06/2020

Page 5 / 5TF-9766D-S
TROUBLESHOOTING
• If the stand feels unstable, make sure it is on a level surface and the feet are correctly and evenly distributed.
• If the stand is making noise when in use, check to make sure all hardware is fully tightened.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

USE & CARE
Under normal use, Sunnydaze hammock chair stands will last for years.
It is important to follow basic use & care tips to prolong the life of your stand.
• SAFE USE: Do not use this chair stand for swinging, bouncing, jumping, twisting, or other excessive
movements; doing so may cause serious injury, including, but not limited to, the stand tipping over.
• CHILDREN: Supervise children at all times. Do not allow children to play on or sleep in any hanging chair.
Chair not included.
• INSPECTION: Ensure the stand is assembled correctly and all hardware is securely tightened before each use.
• CLEANING: Use a soft cloth, warm water and soap to wipe down the stand if necessary. Dry the stand after
cleaning to prevent rust.
• SCRATCHES: The powder coating on the stand is tough and durable but, even under normal use, some
scratching is inevitable. To avoid excessive rust, wipe these areas as needed to remove moisture.
• STORAGE: Store the stand indoors when not in use. Cool, dry locations are recommended to prevent
damage and rust that may result from exposure to moisture.
• Do not exceed the weight capacity: 550 lbs
• Do not swing, bounce, jump, twist, or spin in any hanging chair while
using this stand. This stand was designed for sitting calmly in an
hanging chair. Chair not included.
• This chair stand must be used with all provided parts. Install all parts
in accordance with the assembly instructions.
• Ensure all hardware is properly installed and securely tightened before
each use.
• Always inspect the stand and hardware for damage before each use.
• Do not allow children to use this product without adult supervision.
• When in use, the chair (not included) should remain inside the base
area at all times. A diagram of the base area is shown on the right.
SAFETY STATEMENTS & WARNINGS
06/2020
