Sunnydaze Decor AJ-141 User manual

Page 1 / 3
  
A
Base Back 1
B
Base Front 1
CStraight Pole 1
D
Curved Pole 1
E
Top Base Connector 2
FBottom Base Connector 2
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we
sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof
of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
Photos are used to determine the cause of defects and for future quality control. Register your warranty at
www.serenityhealth.com/warranty/
If you have any questions, comments or concerns, feel free to contact us by phone at 888-881-4668, by email:
[e-mail], or via our contact us page at www.SerenityHealth.com/contact-us/
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packaging.
  
GM6 Bolt 8
HM6 Washer 8
IBolt Cap 8
JFoot 8
K10 x 55mm Bolt 2
LM10 Washer 8
M10 x 60mm Bolt 2
N
Lock Nut 4
OHex Nut Cap 4
CAUTION
This egg chair stand is not
designed for use as a swing.
Bouncing, swinging, or any other
signicant movements while in
use may cause serious injury.
This stand must be on a level,
stable surface. Make sure all
hardware is securely tightened
before each use.
Weight Limit: 265 lbs.
EGG CHAIR STAND
AJ-141
Read all assembly and care instructions carefully before using this product.
Save these instructions for future reference.


  
XSmall Hex Key 1
YLarge Hex Key 1
ZSpanner 1
WARNING
CHOKING HAZARD — This item
contains small parts that can be
swallowed. Keep children away
during assembly.
12/2019Round95cm

1
2
ASSEMBLY
Page 2 / 312/2019Round95cm
Assembly Tip: Ensure all parts and
hardware align correctly before fully
tightening the lock nuts.
1. Align Base Back (A), Base Front
(B), Top Base Connector (E),
and Bottom Base Connector (F).
Secure base parts using Bolt
(G) and Washer (H). Tighten the
hardware using the Small Hex
Key (X). Place Bolt Cap (I) on top
of the bolts.
2. Carefully snap Foot (J) evenly
onto the stand base, as shown.
3. Slide Straight Pole (C) into Base
Back (A) and align the holes.
Secure the pole using Bolt (M),
Washer (L), and Lock Nut (N).
Tighten the hardware using Large
Hex Key (Y) and Spanner (Z).
Place Hex Nut Cap (O) over the
lock nut.
4. Slide Curved Pole (D) onto
Straight Pole (C) and align the
holes. Secure the poles using Bolt
(K), Washer (L), and Lock Nut
(N). Tighten the hardware using
Large Hex Key (Y) and Spanner
(Z). Place Hex Nut Cap (O) over
the lock nut.
I
G
F
E
H
X
1
3
ML N OY
Z
4
K L NOY
Z
J
J
A
B
C
D

USE & CARE
Under normal use, Sunnydaze hammock stands will last for years. It is important to follow basic use & care
tips to prolong the life of your stand.
• SAFE USE: Do not use this chair for swinging, bouncing, jumping, twisting, or other excessive movements;
doing so may cause serious injury, including, but not limited to, the stand tipping over.
• CHILDREN: Supervise children at all times. Do not allow children to play on or sleep in hanging chairs.
Chair not included.
• INSPECTION: Ensure the stand is assembled correctly and the hardware is securely tightened before each
use.
• CLEANING: Use a soft cloth, warm water and mild detergent to wipe down the stand if necessary. Dry the
stand after cleaning to prevent rust.
• SCRATCHES: The powder coating on the stand is tough and durable but, even under normal use, some
scratching is inevitable. To avoid excessive rust, wipe these areas as needed to remove moisture.
• STORAGE: Store the stand indoors when not in use. Cool, dry locations are recommended to prevent
damage and rust that may result from exposure to moisture.
TROUBLESHOOTING
• If the stand feels unstable, make sure it is on a level surface and the feet are correctly and evenly distributed.
• If the stand is making noise when in use, check to make sure all hardware is fully tightened.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

Page 3 / 312/2019Round95cm
• Do not exceed the weight capacity: 265 lbs
• Sunnydaze Egg Chair Stand is intended to be used by one person at a time.
• This chair Stand must be used with all provided parts. Install all parts in accordance with the assembly instructions.
• Ensure all hardware is securely installed and tightened before each use.
• Always inspect the stand and hardware for damage before each use.
• Do not allow children to use this product without adult supervision.
• This stand was designed for sitting calmly in an egg chair. Chair not included.
• Do not swing, bounce, jump, twist, or spin in the chair (not included) when
using this egg chair stand.
• When in use, the chair (not included) should remain inside the base area at
all times. A diagram of the base area is shown on the right.

SAFETY STATEMENTS & WARNINGS